Inicio / Equipos / Armario de esterilización ventilado / SED-2.0TFM-J Air-Over-Steam (Ventilated) Sterilizer
SED-2.0TFM-J
Consultar
SED-2.0TFM-J
SED · SED-2.0TFM-J · Destacado
SED-2.0TFM-J — SED-2.0TFM-J Air-Over-Steam Sterilizer
La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English
SED-2.0TFM-J Air-Over-Steam (Ventilated / Air-Steam Mixed-Pressure) Sterilizer with double-door pneumatic gas-seal interlock. Horizontal pass-through pressure-vessel sterilizer for moist-heat sterilization of liquids in
Plazo de entrega
Consultar
Capacidad de producción
Contáctenos
Funcionamiento
Air-over-steam sterilization with forced recirculation. After load is placed on 304/316 SS sterilizing carts and double doors are closed (gas-seal interlock prevents door opening while pressurised), the cycle runs: preheat → sterilization (mixed clean steam + compressed air over-pressure, forced through one or more high-energy dual-speed blowers at 1.5 kW / <75 dB, circulating through the load for uniform temperature distribution ≤±2°C) → cooling and drying (cooling water fed into integral 304 SS cooling coils; condensed cold air flows through load to cool and evaporate surface moisture) → end. Optional hot-air drying stage for products with strict dryness requirements.
Proceso de funcionamiento
1Air-over-steam sterilization with forced recirculation.
2After load is placed on 304/316 SS sterilizing carts and double doors are closed (gas-seal interlock prevents door opening while pressurised), the cycle runs: preheat → sterilization (mixed clean steam + compressed air over-pressure, forced through one or more high-energy dual-speed blowers at 1.5 kW / <75 dB, circulating through the load for uniform temperature distribution ≤±2°C) → cooling and drying (cooling water fed into integral 304 SS cooling coils; condensed cold air flows through load to cool and evaporate surface moisture) → end.
3Optional hot-air drying stage for products with strict dryness requirements.
Especificaciones técnicas
Especificaciones de la variante: SED-2.0TFM-J
Especificaciones
Modelo
SED-2.0TFM-J
Tensión
AC 380V 50Hz, 3-phase 4-wire
Suministros
Power: 3-phase 4-wire AC 380V 50Hz, 4.5 kW/h; Boiler steam: 0.4–0.6 MPa, ~80 kg/cycle; Water: 0.1–0.3 MPa (also stated 0.2–0.3 MPa), ~120 kg/cycle; Pure water: 0.1–0.2 MPa; Compressed air: 0.5–0.7 MPa (also 0.5–0.8 MPa), ~2 m³/cycle
Potencia
4.5 kW
Presión de aire
Compressed air 0.5-0.7 MPa (also 0.5-0.8 MPa, 2 m3/cycle); steam 0.4-0.6 MPa (boiler steam, 80 kg/cycle); water 0.1-0.3 MPa (also 0.2-0.3 MPa, 120 kg/cycle); pure water 0.1-0.2 MPa
Dimensiones
Longitud
2730 mm
Anchura
1480 mm
Altura
2000 mm
Peso
2200 kg
Superficie de instalación
Overall 2730×1480×2000 mm (L×W×H)
Materiales
Materiales en contacto
316L stainless steel (chamber, door, sterilizing tray); 304 stainless steel (sterilizing cart, transport cart, cooling coils, air ducts); medical silicone rubber (door gasket)
Materiales del cuerpo
316L SS inner chamber 6 mm; Q345R steel jacket (X-ray inspected); 304 SS brushed-finish outer decorative panels
Características principales
Air-over-steam mixed-pressure sterilization for plastic bottles and soft-bag liquid products
High-energy dual-speed forced-circulation blower (1.5 kW, <75 dB noise)
Integral 304 SS cooling coils for in-chamber cooling and surface drying without product transfer
Gas-sealed double-door motorised interlock with pressure safety interlock
Q345R steel jacket X-ray inspected with labor-ministry quality certificate
316L SS inner chamber (6 mm) with precision mechanical-polish internal surface (GMP, no dead angles)
Siemens S7 PLC + Siemens touch screen + micro-printer + recorder
Temperature uniformity ≤±2°C across chamber
Modular loading system: 316L SS sterilization trays, 304 SS carts and transport carts
Specifically designed for liquids in plastic / soft-bag containers where post-sterilization drying is essential
Thermal uniformity ≤±2°C across chamber via forced recirculation
Free GMP documentation: DQ / IQ / OQ files provided at no charge
Free commissioning and operator training by manufacturer
Comes with 2 × SS sterilizing carts, 2 × SS transport carts, and 1 set SS sterilizing trays
Aplicaciones
Sterilization of PE / PP plastic bottle liquids
Sterilization of PVC or composite plastic soft-bag liquids
Products requiring dry containers and packaging at end of cycle (inspection / labelling / packaging)
Sectores
Pharmaceutical manufacturing (LVP and SVP liquid filling)
IV solutions manufacturing
Food / beverage liquid sterilization
Marcas de componentes
PLC (S7 series)
Siemens
Touch screen
Siemens
Micro printer (WH-E36)
Weihuan
Paper recorder
AIRIS (Airuisi)
Temperature probe (Pt100, A-grade, ≤0.15°C error)
AIRIS (Airuisi)
Mobile temperature probe (dual-core Pt100, A-grade)
B+B
Pressure transmitter (model 501)
HUBA
2-position 3-way solenoid valve (2V025-06)
AirTAC
Circulation blower (1.5 kW, <75 dB)
Xinhanyang Machinery
Angle-seat pneumatic valve (E290 series, self-regulating dual seal, 4M cycles)
ASCO
Steam trap (energy-saving, high reliability)
CIS
Water-ring vacuum pump (SK series, low noise, high vacuum)
Yulong
Pressure gauge (YTF-98ZK)
BLD (Brady)
Safety valve (A28-16P, 0.1–0.3 MPa)
Guangyi
Mechanical seal (water-cooled, good sealing)
Burgmann
SED
Hable con SED Sales Team
Especialistas en equipos · contacto por WhatsApp
Consulte el horario y la disponibilidad del equipo
Conformidad
China GMP
Steel pressure-vessel certification (X-ray inspection, labor ministry quality certificate)
DQ / IQ / OQ documentation provided free of charge
GMP validation port reserved
Documentación
Ficha técnica (PDF)
Resumen del equipo, especificaciones y dimensiones · Documento original (inglés)
Solicitar al equipo comercial
Manual del operador
Instalación, funcionamiento y diagnóstico · Documento original (inglés)
Solicitar al equipo comercial
Ficha comparativa (Estándar y Económica)
Comparación de configuraciones · Documento original (inglés)
Solicitar al equipo comercial
Protocolos IQ / OQ / PQ
Documentación de validación para conformidad GMP · Documento original (inglés)
Solicitar al equipo comercial
Protocolos FAT / SAT
Pruebas de aceptación en fábrica y en sitio · Documento original (inglés)
Solicitar al equipo comercial
Planos CAD (STEP / IGES / DWG)
Planos de ingeniería para la instalación · Documento original (inglés)
Solicitar al equipo comercial
Certificados de calibración
Nivel sonoro, resistencia de tierra, rigidez dieléctrica y rugosidad · Documento original (inglés)
Solicitar al equipo comercial
DQ (cualificación del diseño)
Protocolo completo de cualificación del diseño · Documento original (inglés)
Solicitar al equipo comercial
Certificados de materiales
Composición del acero inoxidable 316L · Documento original (inglés)
Solicitar al equipo comercial