Accueil / Équipements / Sécheur sous vide à plateaux carrés (FZG / FZG1 / FZG2) / Dryer - Vacuum Dryer - SED-FZG Square Vacuum Dryer (SED-10FZG-R)

SED-10FZG-R

Sur devis

SED-10FZG-R

SED · SED-10FZG-R · En vedette

SED-10FZG-R — Dryer - Vacuum Dryer - SED-FZG Square Vacuum Dryer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-10FZG-R Large Square Vacuum Dryer. Capacity 360 kg/batch; internal chamber 2200×2000×4300 mm (L×H×D); 10 drying shelves (11 support levels) + 22 heating panels 800×3300×30 mm + 120 aluminium alloy trays 500×800×45 mm

GMP (pre-drying sterilisation capable)

Délai de livraison

Sur devis

Cadence

360 kg/batch

Fonctionnement

Large-scale static vacuum drying: material is loaded onto 120 aluminium alloy trays (1.2 mm stamped, 3 mm holes, anodised surface) → 4 SUS304 tray trolleys pushed onto SUS304 rails inside the chamber → door sealed. 22 heating panels circulate hot water (DN108 inlet / DN89 outlet, metal-threaded connections); each panel has 3 baffle plates to prevent short-circuiting. SED-ZKB-R vacuum pump (300 L/s, 600 Pa) draws air through SUS304 φ108 vacuum main pipe; vapour-liquid separator (φ1500×2000 mm + φ500×800 mm liquid tank) recovers solvents. Hollow silicone rubber sealing strip + heavy-duty 304 hinges + lead-screw handwheel sealing. Reduced pressure lowers the boiling point of solvents in the material, enabling low-temperature drying to protect heat-sensitive products. Pre-drying sterilisation is possible.

Processus de fonctionnement

1Large-scale static vacuum drying: material is loaded onto 120 aluminium alloy trays (1.2 mm stamped, 3 mm holes, anodised surface) → 4 SUS304 tray trolleys pushed onto SUS304 rails inside the chamber → door sealed.

222 heating panels circulate hot water (DN108 inlet / DN89 outlet, metal-threaded connections); each panel has 3 baffle plates to prevent short-circuiting.

3SED-ZKB-R vacuum pump (300 L/s, 600 Pa) draws air through SUS304 φ108 vacuum main pipe; vapour-liquid separator (φ1500×2000 mm + φ500×800 mm liquid tank) recovers solvents.

4Hollow silicone rubber sealing strip + heavy-duty 304 hinges + lead-screw handwheel sealing.

5Reduced pressure lowers the boiling point of solvents in the material, enabling low-temperature drying to protect heat-sensitive products.

6Pre-drying sterilisation is possible.

Caractéristiques techniques

Caractéristiques de la variante : SED-10FZG-R

Caractéristiques

Modèle

SED-10FZG-R

Cadence

360 kg/batch

Fluides et énergie

Hot water (heating panels DN108 inlet / DN89 outlet); electrical power; vacuum pump cooling water; optional condenser for solvent recovery.

Détails de conformité

Sterilisation before drying is possible; GMP compliant. Heating panels pressure-tested at 0.5 MPa for 5 h without leak. Total machine weight 12 tonnes.

Pression d’air

Baking shelf working pressure ≤0.6 MPa; no-load vacuum -0.098 MPa; vacuum pump achieves 600 Pa; heating coils tested at 0.5 MPa for 5 hours without leak

Dimensions

Poids

12000 kg

Emprise au sol

Internal chamber 2200×2000×4300 mm; 4 tray trolleys 1600×880×1505 mm; vapour-liquid separator φ1500×2000 mm; total 12 tonnes — appropriate load-bearing foundation required.

Matériaux

Matériaux en contact

SUS304 (inner liner δ3 mm, heating panels δ3 mm, hot water pipes DN108, rails, tray trolleys, hinges, lead-screw handwheels, chamber feet δ5 mm, vacuum port φ108, sterilisation / safety / drain flanges); aluminium alloy 1.2 mm stamped trays (anodised); hollow silicone rubber seal.

Matériaux du bâti

Q235 carbon steel 14 mm + flat-iron cross-grid reinforcement; SUS304 δ3 mm inner liner (fully welded and polished); SUS304 δ1.2/1.5 mm brushed outer cladding; 80 mm aluminium silicate insulation.

Caractéristiques principales

360 kg/batch capacity, far exceeding standard FZG series

10-shelf + 120 aluminium alloy trays 500×800×45 mm

22 sets SUS304 heating panels δ3 mm, 800×3300×30 mm, 3 baffle plates, 0.5 MPa pressure-tested 5 h without leak

Three-layer chamber: 14 mm Q235 carbon steel + flat-iron cross-grid reinforcement + SUS304 δ3 mm inner liner + SUS304 1.2/1.5 mm outer cladding

80 mm aluminium silicate insulation

No-load vacuum −0.098 MPa; pump capacity 300 L/s, ultimate 600 Pa

4 tray trolleys (SUS304 25×25×2 mm angle steel) + 4-track SUS304 rails

3 sight glasses (2 front + 1 rear)

Pt100 temperature sensors ×2 + vacuum gauges ×2 + vacuum-break electromagnetic valve (electrically controlled)

Vapour-liquid separator φ1500×2000 mm + φ500×800 mm liquid tank for solvent recovery

Hollow silicone rubber seal + heavy-duty 304 hinges + SUS304 lead-screw handwheels

In-chamber heating water pipes designed for easy removal

360 kg/batch ultra-large capacity (3× typical FZG models)

Three-layer reinforced chamber structure — reliable under pressure

Complete system: SED-ZKB-R vacuum pump + vapour-liquid separator + liquid tank

Pre-drying sterilisation capability — GMP-compliant

Ideal for large-batch API low-temperature drying and solvent recovery

Applications

Large-batch heat-sensitive material low-temperature vacuum drying

APIs and intermediates prone to decomposition / polymerisation / degradation

Solvent recovery (with optional condenser)

Sterilisation before drying to meet GMP requirements

Secteurs

Pharmaceutique

Chemical

Food

Electronics

Health products

Marques des composants

SED — SED-ZKB-R vacuum pump unit (300 L/s, 600 Pa)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP (pre-drying sterilisation capable)