Accueil / Équipements / Sertisseuse de boîtes / Automatic Vacuum / Nitrogen-Flush Can Sealing Machine

SED-10FG-B

Sur devis

SED-10FG-B

SED · SED-10FG-B · En vedette

SED-10FG-B — Automatic Vacuum / Nitrogen-Flush Can Sealing Machine

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

The SED-10FG-B is an automatic vacuum / nitrogen-flush can-sealing machine for iron, plastic and paper cans (seal Φ50–127 mm, can height 60–200 mm). It seals 6–10 cans/min in vacuum mode (40–90 kPa negative pressure) and

Choisir une variante (2)

Délai de livraison

Sur devis

Cadence

6–10 cans/min

Fonctionnement

Cans are conveyed into the sealing station and clamped by a fixture. The chamber is closed, the integrated vacuum pump evacuates to 40–90 kPa negative pressure (vacuum mode) or evacuates and back-fills with nitrogen to <3% residual O2 (vacuum + N2 mode). Two roller knives then engage the can body and rotate it against the lid, producing a double-seam closure. After sealing, the chamber vents and the can is released to the discharge conveyor. PLC monitors missing-cap and fault conditions and pauses the line.

Processus de fonctionnement

1Cans are conveyed into the sealing station and clamped by a fixture.

2The chamber is closed, the integrated vacuum pump evacuates to 40–90 kPa negative pressure (vacuum mode) or evacuates and back-fills with nitrogen to <3% residual O2 (vacuum + N2 mode).

3Two roller knives then engage the can body and rotate it against the lid, producing a double-seam closure.

4After sealing, the chamber vents and the can is released to the discharge conveyor.

5PLC monitors missing-cap and fault conditions and pauses the line.

Caractéristiques techniques

Caractéristiques de la variante : SED-10FG-B 6–10 cans/min vacuum + N2 sealer (this model)

Caractéristiques

Modèle

SED-10FG-B

Cadence

6–10 cans/min

Fluides et énergie

380 V three-phase main power (3.12 kW total: 1.5 kW main motor + 1.5 kW vacuum pump + 0.12 kW conveyor); 220 V 50/60 Hz control; compressed air 0.6–0.8 MPa from a customer-supplied ≥3 kW compressor; nitrogen ≥0.3 MPa, ≥3 m³/h for N2-fill mode.

Détails de conformité

All product-contact surfaces are 304 stainless steel; suitable for food and pharmaceutical canning. Pre-delivery seal-integrity testing on every machine. 1-year warranty.

Dimensions

Emprise au sol

1930 × 850 × 1900 mm (L × W × H); 550 kg net / 600 kg gross. Conveyors total 1.5 m at 900 mm working height, 185 mm chain width. Crate 2150 × 950 × 2140 mm.

Matériaux

Matériaux en contact

304 stainless steel can-contact zone; chromium-12 molybdenum-vanadium hardened sealing head; Japanese SKD die-steel roller knives

Matériaux du bâti

304 acier inoxydable 1.5 mm; imported acrylic 10 mm transparent guarding; nylon POM conveyor chain

Caractéristiques principales

Seal diameter Φ50–127 mm; can height 60–200 mm

Vacuum mode: 40–90 kPa negative pressure, 6–10 cans/min

Vacuum + N2 mode: ≤6 cans/min with residual O2 ≤3%

Twin roller-knife body-rotation sealing for high seam integrity

Hardened sealing head (Cr12MoV, >50 HRC) — service life >1 million cans

Taiwan-imported rollers; SKD die-steel cutter — service life >5 million cycles

304 stainless steel body 1.5 mm thick + 10 mm imported acrylic guarding

Defect rate <0.01% (iron), <0.1% (plastic), <0.2% (paper)

Integrated vacuum pump (1.5 kW), no separate purchase required

Cap dispenser holds 200 caps per stack with low-cap alarm and missing-cap auto-stop

PLC (Mitsubishi) + Siemens touch screen, AirTAC pneumatics, Schneider electrics

Pre-shipment seal-integrity testing

Industry-leading defect rate (<0.01% for iron cans) — protects high-value contents like infant formula and pharma powders

Dual-mode operation (vacuum-only or vacuum + N2) supports both standard and oxygen-sensitive products

Integrated vacuum pump eliminates separate equipment purchase and floor space

Hardened sealing tooling delivers 1M+ can life — minimal consumable cost

Hand-wheel screw height adjustment (~5 min) makes can-height changeover fast without parts swap

Designed to integrate inline with bottle unscrambler, flipper and capper for full automation

Two-year warranty on core seal head, spindle, vacuum cover and bearings

Applications

Infant formula and milk powder canning

Coffee bean and ground coffee sealing

Tea leaf canning

Pharmaceutical powder/granule cans

Health-supplement powder cans

Nut and snack metal-can packaging

Specialty food powders

Secteurs

Pharmaceutique

Food (dairy, infant formula)

Coffee & Tea

Health Supplements

Specialty Food

Marques des composants

PLC controller: Mitsubishi (Japan)

Touch screen: Siemens (Germany)

Photoelectric sensors: Autonics (Korea)

Proximity sensors: Autonics (Korea)

Cylinders, solenoid valves, FRL: AirTAC (Taiwan)

Magnetic switches: AirTAC (Taiwan)

Pressure sensor: Delta (Taiwan)

Pneumatic ball valves, indicators, e-stop: Schneider

Intermediate relays: Izumi (Japan)

Switching power supply: MeanWell (Taiwan)

Conveyor motor: Taibang (Taiwan)

Vacuum pump: Zhongde (Dongguan, China)

Roller knife bearings: AOSEN (USA)

Sealing head: Cr12MoV hardened, >50 HRC

Roller knives: SKD die steel (Japan)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Cap dispenser holds 200 caps per stack — replenish as low-cap alarm triggers. Changeover to a new can diameter requires swap of sealing die, clamp and cap dispenser (~40 min); same-diameter different height adjusted in 5 min via hand-wheel screw — no parts swap. Standard tool kit included; spare wear parts available (photo/proximity sensors, sealing head, roller knives, cylinders, motors).