SED-10FG-B
Consultar
SED-10FG-B
SED · SED-10FG-B · Destacado
SED-10FG-B — Automatic Vacuum / Nitrogen-Flush Can Sealing Machine
La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English
The SED-10FG-B is an automatic vacuum / nitrogen-flush can-sealing machine for iron, plastic and paper cans (seal Φ50–127 mm, can height 60–200 mm). It seals 6–10 cans/min in vacuum mode (40–90 kPa negative pressure) and
Elegir variante (2)
Plazo de entrega
Consultar
Capacidad de producción
6–10 cans/min
Funcionamiento
Cans are conveyed into the sealing station and clamped by a fixture. The chamber is closed, the integrated vacuum pump evacuates to 40–90 kPa negative pressure (vacuum mode) or evacuates and back-fills with nitrogen to <3% residual O2 (vacuum + N2 mode). Two roller knives then engage the can body and rotate it against the lid, producing a double-seam closure. After sealing, the chamber vents and the can is released to the discharge conveyor. PLC monitors missing-cap and fault conditions and pauses the line.
Proceso de funcionamiento
1Cans are conveyed into the sealing station and clamped by a fixture.
2The chamber is closed, the integrated vacuum pump evacuates to 40–90 kPa negative pressure (vacuum mode) or evacuates and back-fills with nitrogen to <3% residual O2 (vacuum + N2 mode).
3Two roller knives then engage the can body and rotate it against the lid, producing a double-seam closure.
4After sealing, the chamber vents and the can is released to the discharge conveyor.
5PLC monitors missing-cap and fault conditions and pauses the line.
Especificaciones técnicas
Especificaciones de la variante: SED-10FG-B 6–10 cans/min vacuum + N2 sealer (this model)
Especificaciones
Modelo
SED-10FG-B
Capacidad de producción
6–10 cans/min
Suministros
380 V three-phase main power (3.12 kW total: 1.5 kW main motor + 1.5 kW vacuum pump + 0.12 kW conveyor); 220 V 50/60 Hz control; compressed air 0.6–0.8 MPa from a customer-supplied ≥3 kW compressor; nitrogen ≥0.3 MPa, ≥3 m³/h for N2-fill mode.
Detalles de conformidad
All product-contact surfaces are 304 stainless steel; suitable for food and pharmaceutical canning. Pre-delivery seal-integrity testing on every machine. 1-year warranty.
Dimensiones
Superficie de instalación
1930 × 850 × 1900 mm (L × W × H); 550 kg net / 600 kg gross. Conveyors total 1.5 m at 900 mm working height, 185 mm chain width. Crate 2150 × 950 × 2140 mm.
Materiales
Materiales en contacto
304 stainless steel can-contact zone; chromium-12 molybdenum-vanadium hardened sealing head; Japanese SKD die-steel roller knives
Materiales del cuerpo
304 acero inoxidable 1.5 mm; imported acrylic 10 mm transparent guarding; nylon POM conveyor chain
Características principales
Seal diameter Φ50–127 mm; can height 60–200 mm
Vacuum mode: 40–90 kPa negative pressure, 6–10 cans/min
Vacuum + N2 mode: ≤6 cans/min with residual O2 ≤3%
Twin roller-knife body-rotation sealing for high seam integrity
Hardened sealing head (Cr12MoV, >50 HRC) — service life >1 million cans
Taiwan-imported rollers; SKD die-steel cutter — service life >5 million cycles
304 stainless steel body 1.5 mm thick + 10 mm imported acrylic guarding
Defect rate <0.01% (iron), <0.1% (plastic), <0.2% (paper)
Integrated vacuum pump (1.5 kW), no separate purchase required
Cap dispenser holds 200 caps per stack with low-cap alarm and missing-cap auto-stop
PLC (Mitsubishi) + Siemens touch screen, AirTAC pneumatics, Schneider electrics
Pre-shipment seal-integrity testing
Industry-leading defect rate (<0.01% for iron cans) — protects high-value contents like infant formula and pharma powders
Dual-mode operation (vacuum-only or vacuum + N2) supports both standard and oxygen-sensitive products
Integrated vacuum pump eliminates separate equipment purchase and floor space
Hardened sealing tooling delivers 1M+ can life — minimal consumable cost
Hand-wheel screw height adjustment (~5 min) makes can-height changeover fast without parts swap
Designed to integrate inline with bottle unscrambler, flipper and capper for full automation
Two-year warranty on core seal head, spindle, vacuum cover and bearings
Aplicaciones
Infant formula and milk powder canning
Coffee bean and ground coffee sealing
Tea leaf canning
Pharmaceutical powder/granule cans
Health-supplement powder cans
Nut and snack metal-can packaging
Specialty food powders
Sectores
Farmacéutico
Food (dairy, infant formula)
Coffee & Tea
Health Supplements
Specialty Food
Marcas de componentes
PLC controller: Mitsubishi (Japan)
Touch screen: Siemens (Germany)
Photoelectric sensors: Autonics (Korea)
Proximity sensors: Autonics (Korea)
Cylinders, solenoid valves, FRL: AirTAC (Taiwan)
Magnetic switches: AirTAC (Taiwan)
Pressure sensor: Delta (Taiwan)
Pneumatic ball valves, indicators, e-stop: Schneider
Intermediate relays: Izumi (Japan)
Switching power supply: MeanWell (Taiwan)
Conveyor motor: Taibang (Taiwan)
Vacuum pump: Zhongde (Dongguan, China)
Roller knife bearings: AOSEN (USA)
Sealing head: Cr12MoV hardened, >50 HRC
Roller knives: SKD die steel (Japan)
SED
Hable con SED Sales Team
Especialistas en equipos · contacto por WhatsApp
Consulte el horario y la disponibilidad del equipo
Limpieza y mantenimiento
Cap dispenser holds 200 caps per stack — replenish as low-cap alarm triggers. Changeover to a new can diameter requires swap of sealing die, clamp and cap dispenser (~40 min); same-diameter different height adjusted in 5 min via hand-wheel screw — no parts swap. Standard tool kit included; spare wear parts available (photo/proximity sensors, sealing head, roller knives, cylinders, motors).
Documentación
Ficha técnica (PDF)
Resumen del equipo, especificaciones y dimensiones · Documento original (inglés)
Solicitar al equipo comercial
Manual del operador
Instalación, funcionamiento y diagnóstico · Documento original (inglés)
Solicitar al equipo comercial
Ficha comparativa (Estándar y Económica)
Comparación de configuraciones · Documento original (inglés)
Solicitar al equipo comercial
Protocolos IQ / OQ / PQ
Documentación de validación para conformidad GMP · Documento original (inglés)
Solicitar al equipo comercial
Protocolos FAT / SAT
Pruebas de aceptación en fábrica y en sitio · Documento original (inglés)
Solicitar al equipo comercial
Planos CAD (STEP / IGES / DWG)
Planos de ingeniería para la instalación · Documento original (inglés)
Solicitar al equipo comercial
Certificados de calibración
Nivel sonoro, resistencia de tierra, rigidez dieléctrica y rugosidad · Documento original (inglés)
Solicitar al equipo comercial
DQ (cualificación del diseño)
Protocolo completo de cualificación del diseño · Documento original (inglés)
Solicitar al equipo comercial
Certificados de materiales
Composición del acero inoxidable 316L · Documento original (inglés)
Solicitar al equipo comercial