Accueil / Équipements / Mélangeur-granulateur humide pilote / petite production (25-199 L) / Wet Mixing Granulator (One-Step)

SED-100SZ-H

Sur devis

SED · SED-100SZ-H · En vedette

SED-100SZ-H — Mélangeur-granulateur humide

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-100SZ-H Wet Mixing Granulator (one-step granulator). 100 L mixing barrel, 30 kg per batch. Combines blending and granulating in the same SUS304 chamber: blending wheel (two-speed 270/180 rpm, 9/11 kW) + high-speed ch

GMP (designed to GMP standard)

Choisir une variante (8)

Délai de livraison

Sur devis

Cadence

40–240 kg/batch

Fonctionnement

The specially shaped three-blade impeller rotates to move materials in a regular pattern for efficient mixing. After mixing, the high-speed chopper cuts the wet mass into uniform granules in a short time. Mixing, wetting and granulating are all completed continuously in the same barrel (~10 min). Both drive shafts are sealed with rubber air-seals; >0.5 MPa compressed air purges powder from the seal cavity during operation.

Processus de fonctionnement

1The specially shaped three-blade impeller rotates to move materials in a regular pattern for efficient mixing.

2After mixing, the high-speed chopper cuts the wet mass into uniform granules in a short time.

3Mixing, wetting and granulating are all completed continuously in the same barrel (~10 min).

4Both drive shafts are sealed with rubber air-seals; >0.5 MPa compressed air purges powder from the seal cavity during operation.

Caractéristiques techniques

Caractéristiques de la variante : SED-50SZ-H 50 L / 15 kg/batch / blending 4–5.5 kW / cutting 1.5–2.2 kW

Caractéristiques

Modèle

SED-100SZ-H

Cadence

40–240 kg/batch

Fluides et énergie

Electrical power for blending motor (9/11 kW two-speed) + cutter motor (2.4/3 kW two-speed); compressed air >0.5 MPa for shaft sealing and pneumatic discharge valve.

Détails de conformité

Designed per GMP requirements: SUS304 contact surfaces, no dead corners, easy clean, sealed shafts to prevent contamination, safety interlock on cover and discharge.

Pression d’air

≥0.5MPa (compressed air for shaft sealing)

Dimensions

Emprise au sol

Set on the ground level; leave clearance around for inspection/maintenance

Matériaux

Matériaux en contact

SUS304 stainless steel (mixing barrel, mixer blade, crusher blade, pneumatic open cover); 45# steel (principal axis, crusher shaft); silicone rubber (sealing ring)

Matériaux du bâti

Channel stainless steel (frame and sealing plate)

Caractéristiques principales

One-step granulation: mixing + wetting + granulating in the same chamber

Three-blade impeller (two-speed 270/180 rpm) + chopper (two-speed 1440/2900 rpm)

8–15 min granulation time, 20–80 mesh granule size

Pneumatic discharge valve

Silicone-rubber sealed shaft — prevents powder from entering bearing

Safety interlock on cover and discharge port

GMP-standard design

NSK bearings; DELIXI electrical components

GMP compliant — meets pharmaceutical drug-quality and production requirements

No manual contact contamination — all three steps in one sealed chamber

Fluffy snow-like granules with no lumps and minimal fines

Good batch-to-batch repeatability (controlled by time, speed, binder dosage, power)

Saves 20–25% binder; shortens downstream drying time

Compatible for pipeline use with fluid-bed dryer or one-step fluidized granulator

Applications

Pharmaceutical wet granulation (tablet pre-process)

Chemical / food granule production

Powder metallurgy / cosmetics / dye granulation

Secteurs

Pharmaceutique

Chemical

Food

Powder metallurgy

Cosmétiques

Dye

Marques des composants

WUXI — two-speed mixing motor, two-speed crushing motor, reducer, discharge air cylinder, transmission belt

NSK — bearings

DELIXI — electrical components

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP (designed to GMP standard)

Nettoyage et entretien

After each batch: pour water into the barrel and run blender + cutter to clean; discharge exit and barrel maintain good seal during cleaning. Periodically: check transmission parts, drain oil-water separator.