Accueil / Équipements / Étiqueteuse à manchons / Sleeve Labelling Machine

SED-100RTB-K

Sur devis

SED · SED-100RTB-K · 9 unités vendues

SED-100RTB-K — Sleeve Labelling Machine

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-100RTB-K is a fully-automatic high-speed shrink-sleeve labelling machine integrating bottle feeding, bottle separation, sleeve labelling and label shrinking. Designed for the outer packaging of beverages, condiments,

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

10000 BPH (bottles/hour, label height <=100 mm)

Fonctionnement

PVC/PET/OPS shrink-sleeve film roll is fed through a buffer + tension control unit, then cut to length by a servo-driven eccentric-blade cutter (±1 mm). Two sets of high-speed rotating brush wheels shoot the sleeve onto the bottle at high speed. Two sets of servo-synchronised drive rollers maintain precise film tension. Bottles are separated by a screw-divider mechanism synchronised with the conveyor; the entire line speed is VFD-adjustable. HMI (WEINVIEW) + PLC (Panasonic) controls manual/auto/parameter/monitor modes.

Processus de fonctionnement

1PVC/PET/OPS shrink-sleeve film roll is fed through a buffer + tension control unit, then cut to length by a servo-driven eccentric-blade cutter (±1 mm).

2Two sets of high-speed rotating brush wheels shoot the sleeve onto the bottle at high speed.

3Two sets of servo-synchronised drive rollers maintain precise film tension.

4Bottles are separated by a screw-divider mechanism synchronised with the conveyor; the entire line speed is VFD-adjustable.

5HMI (WEINVIEW) + PLC (Panasonic) controls manual/auto/parameter/monitor modes.

Caractéristiques techniques

Caractéristiques de la variante : SED-100RTB-K standard configuration (covered here)

Caractéristiques

Modèle

SED-100RTB-K

Cadence

10000 BPH (bottles/hour, label height <=100 mm)

Tension

AC 380V 50/60Hz triphasé

Fluides et énergie

AC 380V 50/60Hz three-phase, 3 kW (sleeve labeller). Steam supply 3–6 kg/cm² with consumption <55 kg/h (if steam tunnel selected). Compressed air if pneumatic options fitted.

Détails de conformité

International safety-standard insulated stainless-steel housing; waterproof design. Warranty: 12 months from installation, maximum 16 months from delivery. Commissioning engineer cost: USD 300/person/day (travel and accommodation borne by buyer).

Puissance

3 kW

Pression d’air

Steam 3-6 kg/cm2; steam consumption <55 kg/h

Dimensions

Longueur

2100 mm

Largeur

850 mm

Hauteur

2000 mm

Poids

900 kg

Emprise au sol

Main labelling machine 2100 × 850 × 2000 mm, 900 kg. Optional 1.5 m electric shrink tunnel + 8 m conveyor + centre column + screw divider available separately.

Matériaux

Matériaux en contact

Stainless steel (frame, shrink-tunnel housing, water tray and tunnel hardware)

Matériaux du bâti

acier inoxydable

Compatibilité

Bottle Diameter

60-120mm mm

Bottle Height

30-320mm mm

Label Length

30-250mm mm

Label Material

PVC, PET, OPS

Label Roll Inner Diameter

>=4 inch (101.6mm) mm

Label Roll Outer Diameter

<=500mm mm

Label Thickness

0.027-0.13mm mm

Fonctionnement

Cut Accuracy

+/-1mm mm

Line Efficiency

>=95% (24h) %

Sleeve Success Rate

>=99.9% %

Steam Consumption

<55 kg/h kg/h

warranty

Warranty Period

12 months after acceptance months

Caractéristiques principales

Production capacity ≥10,000 BPH (label height ≤100 mm)

Sleeve qualification rate ≥99.9 percent

Line production efficiency ≥95% (24 h basis)

Cutter seat covers Φ60–Φ120 mm bottles; tool-free quick changeover

Internal cutter-disk origin sensor — no belt re-alignment needed when removing cutter disk

Dual-signal label feed: auto high/low speed switching for stable linear film velocity and accurate cut length

One-motor + dual-arc sync-belt brush-down mechanism for stable label application

WEINVIEW Taiwan HMI + Panasonic Japan PLC control

Modular aluminium-alloy + SUS stainless-steel construction

True high-speed labelling (10,000 BPH) with ±1 mm incision accuracy

Cutter seat covers Φ60–Φ120 mm without tooling change

Internal origin sensor eliminates belt re-alignment on cutter disk removal — competitor machines require this

Dual-signal supply eliminates long/short label defects

Tier-one electrics: WEINVIEW HMI, Panasonic PLC, Panasonic sensors, Keyence fibre sensor

Applications

Shrink-sleeve labelling of beverage bottles

Sleeve labelling of condiment, cosmetic and personal-care bottles

Pharmaceutical bottle labelling

Secteurs

Beverage

Condiment / sauce

Cosmetics / personal care

Pharmaceutical / nutraceutical

Daily chemicals

Marques des composants

WEINVIEW, Taiwan (HMI touch screen)

Panasonic, Japan (PLC; cutter-stop sensor; bottle-detection photoelectric)

Keyence, Japan (high-precision optical-fibre sensor for label detection)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Stainless-steel surfaces: wipe clean with neutral detergent and soft cloth. Water tray (under tunnel) collects condensate — drain regularly. Do not spray water directly onto electrical enclosures.