Accueil / Équipements / Mélangeur-granulateur humide de production (≥200 L) / High-Efficiency Fluid Bed Dryer

SED-1000SZ-T

Sur devis

SED-1000SZ-T

SED · SED-1000SZ-T · En vedette

SED-1000SZ-T — High-Efficiency Fluid Bed Dryer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-1000SZ-T high-efficiency fluid bed dryer. Cylindrical SUS304 main chamber (Φ2200mm), sealed negative-pressure operation with no dead corners. Hopper agitator (2.2 kW reducer) plus side cone-teeth (5-8 mm from cone wa

GMP-compliant

Délai de livraison

Sur devis

Cadence

400–2400 kg/hour

Fonctionnement

Air is filtered through pre-filter and sub-HEPA units, then heated by the 300 m² steam heat exchanger. The 45 kW induced-draft fan draws the heated airflow from below through the perforated plate of the hopper. Inside the chamber, the agitator and side cone-teeth fluidize and continuously redistribute material under negative pressure. Water vapor evaporates rapidly and is carried out with the exhaust, collected by 110 anti-static polyester bags cleaned continuously by pulse-jet. The worm-gear actuator tilts the hopper/trolley for discharge.

Processus de fonctionnement

1Air is filtered through pre-filter and sub-HEPA units, then heated by the 300 m² steam heat exchanger.

2The 45 kW induced-draft fan draws the heated airflow from below through the perforated plate of the hopper.

3Inside the chamber, the agitator and side cone-teeth fluidize and continuously redistribute material under negative pressure.

4Water vapor evaporates rapidly and is carried out with the exhaust, collected by 110 anti-static polyester bags cleaned continuously by pulse-jet.

5The worm-gear actuator tilts the hopper/trolley for discharge.

Caractéristiques techniques

Caractéristiques de la variante : SED-1000SZ-T

Caractéristiques

Modèle

SED-1000SZ-T

Cadence

400–2400 kg/hour

Détails de conformité

Sealed negative-pressure operation; pulse-jet filtered exhaust; fan isolated and sound-attenuated; complies with pharmaceutical GMP production requirements.

Puissance

47.2 kW

Matériaux

Matériaux en contact

SUS304 (main chamber Φ2200, exhaust/intake chambers, agitator, hopper, distribution plate, ducting Φ500mm); 150-mesh anti-static polyester (filter bags, 110 pcs); aluminum (bag seats); SS (cage frames Φ120×1500, 110 pcs); 200-mesh 3-layer woven silk mesh (load mesh)

Matériaux du bâti

Q235-A (frame, fan housings, control cabinet, heat exchanger frame, 3×300 m² heaters); SUS304 outer cladding; copper+45# steel (worm-gear discharge mechanism); carbon steel spray-painted (control cabinet)

Caractéristiques principales

SUS304 main chamber Φ2200mm, cylindrical — no dead corners

Hopper agitator (2.2 kW) + side cone-teeth (5-8 mm gap) — eliminates manual intervention

110 × 150-mesh anti-static polyester filter bags on SS cage frames (Φ120×1500 mm)

Pulse-jet bag cleaning: 12 solenoid valves + SS air receiver

Worm-gear driven tilt discharge (eliminates gravity-tip safety hazard)

Steam heating: 300 m² SUS304+aluminum-fin exchanger, 0.3-0.6 MPa

Steam consumption 600-800 kg/h

Induced-draft fan 9-26, 45 kW with VFD speed control

Pre-filter + sub-HEPA air filtration

Top removable structure for quick filter-bag replacement

Sound-attenuated, isolated fan (GMP-compliant)

Sealed negative-pressure operation

Bottom load mesh: 200-mesh 3-layer woven silk mesh

Side cone-tooth agitator design eliminates the manual stirring problem common in fluid bed dryers

Worm-gear discharge prevents the tip-over hazard of gravity-discharge designs

Bottom mesh + new bag-clamp design eliminate the gap fatigue failure mode

Quick filter-bag change via removable cage frame from top

Pulse cleaning reduces operator labour and maintains consistent airflow

1-year warranty + lifetime service

Applications

Drying wet pharmaceutical granules

Drying powders, granules and small-lump materials

Drying volume-changing materials (e.g. konjac, polyacrylamide)

Drying sticky or cohesive granules

Secteurs

Pharmaceutical (solid dosage)

Food

Feed

Chemical

Marques des composants

Induced-draft fan: 9-26 series

Blower fan: 4-42, 7.5 kW

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP-compliant

Nettoyage et entretien

Pneumatic bottom flange tool (bayonet 3-point vertical lift) provided for safe bottom-flange removal. Replace/clean filter bags by removing the cage frame from the top via the pulse blowback tube. Wipe inner chamber and cone after each batch.