Accueil / Équipements / Ligne de remplissage d’eau en bouteilles / Bottled Water Filling Production Line (SED-1.5PZS-A)

SED-1.5PZS-A

Sur devis

SED-1.5PZS-A

SED · SED-1.5PZS-A · En vedette

SED-1.5PZS-A — Ligne de remplissage d’eau en bouteilles

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-1.5PZS-A is a complete turn-key bottled-water filling production line covering: RO water treatment (15 t/h, single-stage RO with US Hydranautics membrane, ozone sterilization); SED-50GX-A three-in-one washing/filling

Délai de livraison

Sur devis

Cadence

22000–24000 BPH @500ml; 11000-12000 BPH @1L

Fonctionnement

Raw water → raw-water tank → sand filter → activated carbon filter → sodium ion exchanger → 0.45 µm precision filter → single-stage RO (recovery ~75%, desalination ≥ 97%) → ozone sterilization + mixing tower → treated water tank. Bottles (preforms blown to PET bottles) are conveyed by air conveyor to the monoblock where they are rinsed with ozone water, gravity-filled to the set level, and capped. Filled bottles pass laser date-coder, bottle dryer, and pressureless conveyor before OPP hot-glue labeling and PE-film shrink over-wrapping.

Processus de fonctionnement

1Raw water → raw-water tank → sand filter → activated carbon filter → sodium ion exchanger → 0.45 µm precision filter → single-stage RO (recovery ~75%, desalination ≥ 97%) → ozone sterilization + mixing tower → treated water tank.

2Bottles (preforms blown to PET bottles) are conveyed by air conveyor to the monoblock where they are rinsed with ozone water, gravity-filled to the set level, and capped.

3Filled bottles pass laser date-coder, bottle dryer, and pressureless conveyor before OPP hot-glue labeling and PE-film shrink over-wrapping.

Caractéristiques techniques

Caractéristiques de la variante : SED-1.5PZS-A

Caractéristiques

Modèle

SED-1.5PZS-A

Cadence

22000–24000 BPH @500ml; 11000-12000 BPH @1L

Tension

380V 50Hz 3 phases

Fluides et énergie

Power: 380 V 50 Hz three-phase. Compressed air: 0.6 MPa (filler 0.8 Nm³/h; over-wrapper 0.4–0.7 MPa, max 0.25 Nm³/min). Bottle wash water: 3 m³/h at 0.15–0.2 MPa. Raw water supply continuous to RO inlet.

Détails de conformité

All product-contact parts SUS304. RO desalination ≥ 97%, recovery ~75%. Ozone sterilization for tank and lines. Filling monoblock has CIP washing connection. 12-month warranty from acceptance; no longer than 18 months from delivery.

Pression d’air

0.6 MPa compressed air

Dimensions

Emprise au sol

Plant area required: ~2 500 m². 60 m air conveyor (blowing to filling) + 250 m filled-bottle conveyor (after capping). Filler monoblock dimensions L6200 × W4500 × H2600 mm.

Matériaux

Matériaux en contact

SUS304 stainless steel for all product-contact parts including water tanks, filter housings, washing/filling structure, ozone mixing tower, and conveyor frames.

Matériaux du bâti

SUS304 stainless steel structure and protective shell on filler; SUS304 frame on bottle dryer; carbon-steel base of filler with stainless steel cover.

Caractéristiques principales

Capacity 22 000–24 000 BPH @500 ml; 11 000–12 000 BPH @1 L; efficiency ≥ 95%

Single-stage RO water treatment 15 t/h, US Hydranautics membrane, recovery ~75%, desalination ≥ 97%

Ozone sterilization for tanks and lines

SED-50GX-A three-in-one monoblock: 50-head rinser, 50-head gravity filler, 15-head capper

OPP hot-melt glue labeler with Siemens servo and Schneider electrical

Laser date-coder (no consumables)

PE-film heat-shrink over-wrapper

60 m air conveyor (blowing to filling); 250 m filled-bottle conveyor

All product-contact parts SUS304

CIP connection on filling monoblock

Mitsubishi PLC + Siemens HMI on filling monoblock

Turn-key line: water treatment to palletizing in one project

Mitsubishi PLC + Siemens HMI on filler; Siemens servo + Schneider on labeler and over-wrapper

All product-contact surfaces SUS304; CIP-capable filler

12-month warranty from acceptance; 3 changeover sets (500 ml / 1 L / 2 L) standard

Optional robot encase, auto carton erector, robot palletizer for full automation

Applications

Bottled drinking water filling and packaging

PET bottle 500 ml and 1 L (configurable up to 2 L)

Pure water production from raw water

Secteurs

Beverage / bottled water

Pharmaceutical purified water (with adaptation)

Marques des composants

RO membrane: US Hydranautics

Pumps: Nanfang

PLC (filler): Mitsubishi

Touch screen (filler): Siemens

Frequency converter: Mitsubishi

Photoelectric sensor: Turck/Banner; PEPPERL+FUCHS (optional)

Servo motor (labeler): Siemens

Electrical (labeler, over-wrapper): Schneider

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

CIP connection on filling monoblock for sanitary cleaning of filling heads and liquid path. Auto-stop washing spray when no bottles present. Conveyor lubrication system with water spray, drip tray and drain. RO membrane cleaning system included.