Accueil / Équipements / Système de pulvérisation de liquide / Simple High-Atomization Spray Gun System (SED-1.5PYXT-M)

SED-1.5PYXT-M

Sur devis

SED-1.5PYXT-M

SED · SED-1.5PYXT-M · En vedette

SED-1.5PYXT-M — Simple High-Atomization Spray Gun System

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-1.5PYXT-M is a simple high-atomization spray gun system for pharmaceutical pilot lines and research institutes, used for film-coating tablets and pellets, and for producing micro-granules and water pills. Two compres

Choisir une variante (4)

Délai de livraison

Sur devis

Cadence

600 ml/min spray rate

Fonctionnement

Compressed air enters the gun via two ports: an atomizing-air port that breaks the liquid into fine droplets at the nozzle, and a pattern-air port that flattens the spray into a fan shape via the 'figure-8' deflector at the gun tip. Liquid flow rate is adjusted by rotating the piston cap (clockwise to reduce, counter-clockwise to increase) and locking with the lock nut. Fan width is adjusted by the pattern-air screw. The stand is positioned so the fan spray hits the coating bed at its highest fall point inside the pan.

Processus de fonctionnement

1Compressed air enters the gun via two ports: an atomizing-air port that breaks the liquid into fine droplets at the nozzle, and a pattern-air port that flattens the spray into a fan shape via the 'figure-8' deflector at the gun tip.

2Liquid flow rate is adjusted by rotating the piston cap (clockwise to reduce, counter-clockwise to increase) and locking with the lock nut.

3Fan width is adjusted by the pattern-air screw.

4The stand is positioned so the fan spray hits the coating bed at its highest fall point inside the pan.

Caractéristiques techniques

Caractéristiques de la variante : φ0.5 mm

Caractéristiques

Modèle

SED-1.5PYXT-M

Cadence

600 ml/min spray rate

Fluides et énergie

Compressed air supply 60–140 L/min (nozzle-dependent), driven by 0.4–1.5 kW compressor. Liquid supply line from external pump.

Dimensions

Emprise au sol

Spray gun mounts on a stand bar over the coating pan. Stand is adjusted so the spray pattern hits the coating bed at its highest fall point.

Matériaux

Matériaux en contact

Stainless steel nozzle and gun body (standard pharma grade)

Matériaux du bâti

Stainless steel body and stand

Caractéristiques principales

Two-fluid (atomizing + pattern air) high-atomization spray gun

Adjustable liquid flow via piston cap with locking nut

Adjustable fan-pattern width via pattern-air screw

Adjustable spray angle via stand positioning

Four nozzle diameters: φ0.5 / φ1.0 / φ1.3 / φ2.0 mm

Spray rate range: 0–60 ml/min (φ0.5) to 0–600 ml/min (φ2.0)

Fan width: 160–200 mm (φ0.5) to 300–400 mm (φ2.0)

Air consumption: 60–140 L/min depending on nozzle

Compatible compressor: 0.4–1.5 kW

Simple, low-cost spray system suitable for R&D and small batches

Wide spray-rate range (0–60 to 0–600 ml/min) by nozzle swap

Easy field calibration of liquid flow and pattern width

Compatible with standard coating pan setups

Applications

Film coating of tablets

Film coating of pellets and pills

Powder micro-granulation

Water-pill production

Secteurs

Pharmaceutical R&D

Pharmaceutical pilot / scale-up

Research institutes

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Loosen the lock nut, remove the piston cap and nozzle for flushing between solution changes. Rinse air and liquid passages with the appropriate solvent.