Accueil / Équipements / Autoclave à vide pulsé / SED-0.8MM-J Pulsating-Vacuum Sterilizer (Gas-Sealed Double-Leaf Motorized Doors)

SED-0.8MM-J

Sur devis

SED-0.8MM-J

SED · SED-0.8MM-J · En vedette

SED-0.8MM-J — SED-0.8MM-J Pulsating-Vacuum Sterilizer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-0.8MM-J pulsating-vacuum (saturated steam) sterilizer/autoclave — gas-sealed, double-leaf motorized pass-through doors. Horizontal inner-outer double-shell design: inner chamber 6 mm SUS304 SS; outer jacket 6 mm Q345

GB 150.1/2/3/4-2011 (Chinese steel pressure vessel code, Class I)GMP-compliant design with standard validation interfaces

Choisir une variante (2)

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Saturated steam is the sterilization medium. Before the sterilization phase, the cycle pulsates vacuum and steam several times to evacuate residual cold air from load crevices, ensuring uniform heat penetration throughout porous loads (textiles, dressings). The working temperature (139 °C) and pressure (0.25 MPa) are maintained for the configured hold time. Temperature is monitored by two Pt100 probes (chamber and in-load). Cycle data (pressure, temperature, time, F0) are printed by the EPSON-chip micro printer.

Processus de fonctionnement

1Saturated steam is the sterilization medium.

2Before the sterilization phase, the cycle pulsates vacuum and steam several times to evacuate residual cold air from load crevices, ensuring uniform heat penetration throughout porous loads (textiles, dressings).

3The working temperature (139 °C) and pressure (0.25 MPa) are maintained for the configured hold time.

4Temperature is monitored by two Pt100 probes (chamber and in-load).

5Cycle data (pressure, temperature, time, F0) are printed by the EPSON-chip micro printer.

Caractéristiques techniques

Caractéristiques de la variante : SED-0 chamber 1400×680×850 mm

Caractéristiques

Modèle

SED-0.8MM-J

Tension

AC380V/220V 50Hz, 3-phase 5-wire

Fluides et énergie

Drinking-grade water: 0.1–0.3 MPa, ~220 kg per cycle; Plant steam: 0.4–0.6 MPa, ~40 kg per cycle; Compressed air: 0.5–0.7 MPa; Electrical: AC380V/220V 50Hz, 3-phase 5-wire, 2.5 kW.

Détails de conformité

Chamber and jacket designed and built to GB 150.1/2/3/4-2011 (Class I pressure vessel). X-ray weld inspection with full quality certificates. Sanitary 304 SS tubing and tri-clover connections throughout utility lines. Pneumatic angle-seat valves replace check valves on steam-trap line to prevent cross-contamination.

Puissance

2.5 kW

Pression d’air

Working pressure 0.25 MPa; design pressure 0.3 MPa; ultimate vacuum -0.095 MPa; working temperature 139 °C

Dimensions

Longueur

1680 mm

Largeur

1400 mm

Hauteur

1920 mm

Poids

1400 kg

Emprise au sol

1680 × 1400 × 1920 mm (L×W×H), net weight 1400 kg. Pass-through configuration requires barrier-wall opening sized to outer envelope.

Matériaux

Matériaux en contact

SUS304 stainless steel (6 mm inner chamber, 8 mm door panels, sanitary tubing, sterilization cart and transport carts); medical-grade pharmaceutical-grade silicone gaskets

Matériaux du bâti

SUS304 stainless steel (chamber); Q345R pressure-vessel steel (outer jacket); 1.2 mm 304 oil-ground brushed stainless decorative outer panels

Caractéristiques principales

Gas-sealed double-leaf motorized pass-through doors with safety + pressure interlocks

Inner chamber 6 mm SUS304; outer jacket 6 mm Q345R pressure-vessel steel; door panels 8 mm 304 SS

Medical-grade pharmaceutical-grade silicone door gasket, compressed-air automatic sealing

Pulsating-vacuum air removal — eliminates cold-air pockets for uniform sterilization of porous loads

Heat uniformity ≤ ±1 °C; ultimate vacuum -0.095 MPa

Working temperature 139 °C, working pressure 0.25 MPa (design 144 °C / 0.3 MPa)

GMP-validated design with standard validation interfaces; X-ray weld inspection on chamber welds

Two Pt100 temperature probes (chamber + in-load liquid)

Real-time pressure/temperature/time/F0 reporting via EPSON-chip micro printer; touchscreen with electronic-signature and admin permissions

Sanitary 304 SS tubing, tri-clover quick-clamp connections throughout

Pneumatic angle-seat valves on steam-trap line — prevents reverse cross-contamination

50 mm aluminum-silicate insulation; 1.2 mm 304 brushed-stainless decorative outer panels

Includes 1 × 304 SS sterilization cart + 2 × 304 SS transport carts

Designed and validated to Chinese GMP; suitable for pharmaceutical sterile manufacturing and hospital CSSD use

Premium imported instrumentation: Siemens PLC, ASCO valves, HUBA pressure transmitter, B+B / Ereith Pt100

Pulsating vacuum cycle ensures uniform sterilization of porous loads (textiles, dressings)

Pass-through design allows clean / non-clean barrier separation

Sanitary internal tubing with tri-clover connections meets pharmaceutical clean-utility requirements

Applications

Sterilization of clothing, dressings and textiles (porous loads)

Sterilization of metal surgical instruments

Sterilization of culture media

Sterilization of laboratory glassware

Hospital CSSD and pharmaceutical sterile-area sterilization

Secteurs

Pharmaceutical (sterile / injectable)

Hospital / CSSD

Health and scientific research

Microbiology / culture media laboratories

Marques des composants

Siemens Germany (PLC S7-200)

ASCO USA (angle-seat pneumatic valves, 4 million-cycle life)

HUBA Switzerland (pressure transmitter)

B+B Germany (Pt100 soft temperature probe)

Ereith (Pt100 hard temperature probe)

Airtac Taiwan (solenoid valves)

TRE / Pingtong Taiwan (touchscreen with curve-print function)

Weihuang Beijing (micro printer with EPSON chip)

Brady Beijing (pressure gauges)

Yulong Shanghai (water-ring vacuum pump)

Jiangsu Santong (0.22 μm sterile air filter)

Zhongzhi CIS (steam trap)

Guangyi Zhejiang (safety valve, 0.1–0.3 MPa)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GB 150.1/2/3/4-2011 (Chinese steel pressure vessel code, Class I)

GMP-compliant design with standard validation interfaces