Inicio / Equipos / Línea de producción de cápsulas blandas / SED-100RJ1-C Fully-Automatic Softgel Encapsulation Machine

SED-100RJ1-C

Consultar

SED-100RJ1-C

SED · SED-100RJ1-C · Destacado

SED-100RJ1-C — SED-100RJ1-C Fully-Automatic Softgel Encapsulation Machine

La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English

SED-100RJ1-C Fully-Automatic Softgel Encapsulation Machine and production line - GMP-grade rotary-die encapsulator with Siemens PLC + Siemens/ABB control, all parts machined on Swiss-made high-precision CNC. Die-roll mai

Designed to GMP standards

Elegir variante (3)

Plazo de entrega

Consultar

Capacidad de producción

Contáctenos

Funcionamiento

Two gelatin films are formed on left/right gelatin rollers - gelatin liquid from the heated gelatin box coats onto the rotating roller and is chilled by a circulating water-cooling system. Films pass through the oil-roller system (liquid paraffin lubrication), then meet between the left/right rotary dies driven by an AC inverter (0-4rpm in manual / 0-5rpm spec). The 6-plunger feeding pump (volume 0-1.5mL each, continuously adjustable) injects fill via the new rectangular direct-injection wedge - heated by heating tube and PID temperature sensor - into each die cavity as the films seal and cut. A pill ejector below the head drops finished capsules onto an inclined chute and stainless conveyor feeding the multi-section stainless tumble dryer; forward rotation tumbles capsules for shape setting, reverse rotation discharges them. A ground-based three-layer gelatin tank supplies gelatin via air-pressurised silicone hose with heating jacket. Operator controls via Siemens HMI touchscreen (bilingual Chinese/English).

Proceso de funcionamiento

1Two gelatin films are formed on left/right gelatin rollers - gelatin liquid from the heated gelatin box coats onto the rotating roller and is chilled by a circulating water-cooling system.

2Films pass through the oil-roller system (liquid paraffin lubrication), then meet between the left/right rotary dies driven by an AC inverter (0-4rpm in manual / 0-5rpm spec).

3The 6-plunger feeding pump (volume 0-1.5mL each, continuously adjustable) injects fill via the new rectangular direct-injection wedge - heated by heating tube and PID temperature sensor - into each die cavity as the films seal and cut.

4A pill ejector below the head drops finished capsules onto an inclined chute and stainless conveyor feeding the multi-section stainless tumble dryer; forward rotation tumbles capsules for shape setting, reverse rotation discharges them.

5A ground-based three-layer gelatin tank supplies gelatin via air-pressurised silicone hose with heating jacket.

6Operator controls via Siemens HMI touchscreen (bilingual Chinese/English).

Especificaciones técnicas

Especificaciones de la variante: SED-100RJ-B (Experimental Type) - laboratory R&D variant

Especificaciones

Modelo

SED-100RJ1-C

Tensión

220V / 50Hz (manual) — also quoted 360V 3-phase 1.8 kW configurable

Suministros

Total ~6kW; 220V 50Hz (key parts modifiable to 360V 3-phase). UPS or AC stabiliser >=6kW recommended; voltage tolerance +-10%, frequency +-5%. Compressed air <=0.05MPa for gelatin tank pressure feed. Cooling water. Environment: room temperature 16-22C, relative humidity 35-50%.

Detalles de conformidad

GMP-compliant; vessel/tank fabrication per Q/WRJ02-2002, GB9684-88 and JB/T4735-1997. Floor load capacity >=5MPa.

Potencia

6 kW

Presión de aire

Gelatin-bucket pneumatic feed: ≤ 0.05 MPa

Dimensiones

Longitud

1500 mm

Anchura

530 mm

Altura

1350 mm

Peso

400 kg

Superficie de instalación

Main machine 1500x530x1350mm (manual) / 1440x660x1350mm (data sheet), 400kg, four movable casters. Tumble dryer (per section) 1220x530x720mm, 160kg. Drying-tray vehicle 30 trays each (PE tray Phi750x480x54mm). Gelatin reactor SED-100MJQ-C 100L.

Materiales

Materiales en contacto

Stainless steel 316L (gelatin-tank and medicine-prep-tank contact parts); SUS304 (other contact surfaces)

Materiales del cuerpo

Stainless steel 304 (machine body and tank exteriors); polished

Características principales

Fully automatic GMP softgel encapsulator with Siemens PLC + Siemens/ABB control

All parts CNC-machined; die-roll main-shaft parallelism 0.01mm

Imported high-quality bearings for low wear

Dosage tolerance <=+-1.5% (data sheet); <=+-1% at >=500mg (data table)

6-plunger feeding pump, single plunger 0-1.5mL, continuously adjustable

New rectangular direct-injection wedge - better for sticky materials

Heating tubes (150Wx6) + PT100 temp sensors on spray body and gelatin box

Liquid-cooled gelatin rollers with automatic temperature control

Lubricating-oil-saving system

4-section stainless tumble dryer with Siemens VFD; forward = dry, reverse = discharge

Bundled 100L SED-100RJG-C ground gelatin melting & feeding tank (3-layer SUS304/316L)

Bundled 100L medicine-prep tank (316L contact / 304 body)

Optional colloid mill for suspension formulations

Three drying-tray vehicles, 30 medical-grade PE trays each (Phi750x480x54mm)

SED-100MJQ-C 100L gelatin reactor with electric heating + vacuum + pneumatic horizontal feed

Siemens touchscreen HMI with bilingual Chinese/English UI, recipe management, jog mode

Free FAT with raw material supplied by manufacturer

Tier-one European brand control package (Siemens, ABB, Phoenix, Murrplastik, ILME)

Capacity 18,900 capsules/hr (4# Oval @ 3rpm) - larger production than lab variant

Dosage accuracy <=+-1% at fills >=500mg - pharma-grade

Bilingual touchscreen UI suitable for export customers

Designed to GMP for medical, nutraceutical, food and cosmetic softgels

Aplicaciones

Softgel encapsulation for pharmaceutical, nutraceutical, food, and cosmetic products

Production of olive / oblong / oval / tube softgel shapes

Encapsulation of sticky raw materials via rectangular direct-injection wedge

Sectores

Farmacéutico

Nutraceutical / health food

Food

Cosméticos

SED

Hable con SED Sales Team

Especialistas en equipos · contacto por WhatsApp

Consulte el horario y la disponibilidad del equipo

+86 139 5885 3738

Enviar correo Chatear por WhatsApp →Solicitar llamada de 30 minutos →

Conformidad

Designed to GMP standards

Limpieza y mantenimiento

Each shift: top up liquid paraffin in body, feeding pump and hopper-side oil tanks. Weekly: replace liquid paraffin in body and feed pump and clean the filter; remove and clean pill ejector. Always keep both rubber wheels clean and oil-free. Immediately clean gelatin box and gelatin hose when stopping production. Check main drive belt + conveyor belt tension each shift. Periodically clean dryer fan-cover air inlet. Annually: dismantle, inspect and clean all mechanical equipment. Check insulation resistance (>=5MOhm) and grounding regularly.

Documentación

Ficha técnica (PDF)

Resumen del equipo, especificaciones y dimensiones · Documento original (inglés)

Solicitar al equipo comercial

Manual del operador

Instalación, funcionamiento y diagnóstico · Documento original (inglés)

Solicitar al equipo comercial

Ficha comparativa (Estándar y Económica)

Comparación de configuraciones · Documento original (inglés)

Solicitar al equipo comercial

Protocolos IQ / OQ / PQ

Documentación de validación para conformidad GMP · Documento original (inglés)

Solicitar al equipo comercial

Protocolos FAT / SAT

Pruebas de aceptación en fábrica y en sitio · Documento original (inglés)

Solicitar al equipo comercial

Planos CAD (STEP / IGES / DWG)

Planos de ingeniería para la instalación · Documento original (inglés)

Solicitar al equipo comercial

Certificados de calibración

Nivel sonoro, resistencia de tierra, rigidez dieléctrica y rugosidad · Documento original (inglés)

Solicitar al equipo comercial

DQ (cualificación del diseño)

Protocolo completo de cualificación del diseño · Documento original (inglés)

Solicitar al equipo comercial

Certificados de materiales

Composición del acero inoxidable 316L · Documento original (inglés)

Solicitar al equipo comercial