SED-1.32MJQ-C
Consultar
SED-1.32MJQ-C
SED · SED-1.32MJQ-C · Destacado
SED-1.32MJQ-C — Semi-Automatic Horizontal Steam / Water-Spray Retort Sterilizer
La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English
SED-1.32MJQ-C is a semi-automatic horizontal steam/water-bath retort sterilizer: 700 mm ID × 1200 mm length (~1.32 m³). SUS30408 stainless steel body; direct steam heating for temperature rise, steam/hot-water circulatio
Plazo de entrega
Consultar
Capacidad de producción
Contáctenos
Funcionamiento
Cycle: (1) fill pre-cooled water tank; (2) apply 3-phase 4-wire power; (3) charge compressed-air receiver to 0.8 MPa, regulate to 0.5–0.6 MPa; (4) steam at 0.4–0.5 MPa; (5) load product, engage mechanical safety interlock, open door seal with compressed air; (6) sterilize — temperature controller cycles steam inlet valve to compensate heat absorption, pressure auto-regulated by inlet/vent valves; (7) cool — cold water floods retort to discharge temperature; (8) drain cooling water, vent residual pressure; (9) disengage interlock, close compressed air seal, unload product. Large-bore steam line ensures fast temperature rise to retain food flavor and color.
Proceso de funcionamiento
1Cycle: (1) fill pre-cooled water tank; (2) apply 3-phase 4-wire power; (3) charge compressed-air receiver to 0.8 MPa, regulate to 0.5–0.6 MPa; (4) steam at 0.4–0.5 MPa; (5) load product, engage mechanical safety interlock, open door seal with compressed air; (6) sterilize — temperature controller cycles steam inlet valve to compensate heat absorption, pressure auto-regulated by inlet/vent valves; (7) cool — cold water floods retort to discharge temperature; (8) drain cooling water, vent residual pressure; (9) disengage interlock, close compressed air seal, unload product.
2Large-bore steam line ensures fast temperature rise to retain food flavor and color.
Especificaciones técnicas
Especificaciones de la variante: SED-1.32MJQ-C
Especificaciones
Modelo
SED-1.32MJQ-C
Tensión
380V, 3-phase 4-wire
Suministros
Power: 380V, 3-phase 4-wire, 42.2 kW total; Steam: 0.4–0.5 MPa; Compressed air: receiver at 0.8 MPa, regulated to 0.5–0.6 MPa, compressor 0.8 m³/min @ 8 bar; Cooling water: >3.3 m³ pre-cooled tank; Soft water hardness ≤ 0.003 mmol/L
Detalles de conformidad
Pressure vessel designed and built per GB150-2011 'Steel Pressure Vessel Manufacturing Standard'. Design references HISAKA (Japan) and STOCKTEC (Germany). Satisfies GMP, FDA, ISO9001-2000 and HACCP requirements. Safety valve carries China national QC certification.
Potencia
42.2 kW
Presión de aire
Compressed air receiver 0.8 MPa; regulated to 0.5-0.6 MPa for pneumatic actuators; steam supply 0.4-0.5 MPa; design 0.35 MPa, max work 0.3 MPa, hydrotest 0.44 MPa
Dimensiones
Longitud
2400 mm
Anchura
1200 mm
Altura
1300 mm
Superficie de instalación
~2400 × 1200 × 1300 mm (L × W × H) overall; chamber 700 mm ID × 1200 mm
Materiales
Materiales en contacto
SUS30408 stainless steel chamber (4 mm wall); SUS304 stainless steel piping; SUS304 sterilization trays (perforated); SUS304 transport tray; SUS304 trolley
Materiales del cuerpo
SUS30408 stainless cylinder body and dished heads; SUS304 piping
Características principales
Chamber 700 mm ID × 1200 mm length (~1.32 m³); effective working dimensions 1200 × 450 × 450 mm
Design pressure 0.35 MPa; max working pressure 0.3 MPa; hydrotest 0.44 MPa; max working temperature 142 °C
Wall thickness 4 mm SUS30408; overall footprint ~2400 × 1200 × 1300 mm
Total power 42.2 kW (40 kW + 2.2 kW pump); voltage 380V 3-phase 4-wire
Direct steam heating + steam/hot-water circulation + direct cold-water injection
Semi-automatic: auto temperature, pressure and time; manual mechanical safety interlock
Quick-open interlocking flange (Haisheng, Zhejiang) — forged SUS304
SUS30408 cylinder body and dished heads (Baosteel / Taisteel, one-shot press-formed, vibration stress-relieved)
High-flow / high-head cold-water pump (Kaiyuan or Dongfang, Shanghai) for rapid cool-down
Premium controls: Schneider switch power, Danfoss pressure transmitter, B+B temperature transmitter, Airtac valves, Chint electrical components
Designed per GB150-2011 with GMP, FDA, ISO9001-2000 and HACCP compliance principles
Benchmarked against HISAKA (Japan) and STOCKTEC (Germany) — optimized heat distribution
Premium components: Schneider (France), Danfoss (Denmark), B+B (Germany)
Auto plasma welding (single-side weld, double-side forming) — minimal HAZ, beautiful welds
Fast cool-down with high-flow / high-head pump — preserves food flavor and color
Optional cooling tower pump and softened-water plant available
Aplicaciones
Canned-food retort sterilization (tins, tinplate)
Flexible-pack / retort-pouch sterilization
Soft-pack beverages and snacks
Bird's nest, ready-to-eat meals, condiments, baby food in cans or pouches
NOT recommended for glass-bottle sterilization (per design specification)
Sectores
Food processing (canned and retort-pouch)
Ready-meal / convenience-food production
Health-supplement manufacturing
Marcas de componentes
Quick-open flange: Haisheng (Zhejiang) — forged SUS304
Cylinder body and dished heads: Baosteel / Taisteel (Shanghai/Taiyuan) — SUS30408
Circulation / cold-water pump: Kaiyuan or Dongfang (Shanghai)
Manual butterfly valves: Bonas Wei (Tianjin)
Check valves: Jingrui (Qingdao)
Safety valve: Huifeng (Qingdao) — China national QC certified
Pressure gauge: Donghang (Weifang)
Temperature gauge: Huaqing (Qingdao)
Switch power supply: Schneider (France)
Pressure transmitter: Danfoss (Denmark)
Temperature transmitter: B+B (Germany)
Buttons, relays, contactors, breakers, indicator lamps: Chint (Zhejiang)
Solenoid valve / air filter / regulator: Airtac (Taiwan)
Cable: Delixi (Zhejiang)
SED
Hable con SED Sales Team
Especialistas en equipos · contacto por WhatsApp
Consulte el horario y la disponibilidad del equipo
Conformidad
GB150-2011 steel pressure vessel compliance
GMP and FDA referenced standards
ISO9001-2000 quality system
HACCP-aligned design
Safety valve carries China national QC certification
Limpieza y mantenimiento
SUS304 perforated sterilization trays (1200 × 450 × 150 mm, 3 per set) allow free water flow for thorough rinsing. Drain all cooling water after each cycle. Rinse chamber interior with clean water. Pneumatic auto-drain water filter requires periodic maintenance.
Documentación
Ficha técnica (PDF)
Resumen del equipo, especificaciones y dimensiones · Documento original (inglés)
Solicitar al equipo comercial
Manual del operador
Instalación, funcionamiento y diagnóstico · Documento original (inglés)
Solicitar al equipo comercial
Ficha comparativa (Estándar y Económica)
Comparación de configuraciones · Documento original (inglés)
Solicitar al equipo comercial
Protocolos IQ / OQ / PQ
Documentación de validación para conformidad GMP · Documento original (inglés)
Solicitar al equipo comercial
Protocolos FAT / SAT
Pruebas de aceptación en fábrica y en sitio · Documento original (inglés)
Solicitar al equipo comercial
Planos CAD (STEP / IGES / DWG)
Planos de ingeniería para la instalación · Documento original (inglés)
Solicitar al equipo comercial
Certificados de calibración
Nivel sonoro, resistencia de tierra, rigidez dieléctrica y rugosidad · Documento original (inglés)
Solicitar al equipo comercial
DQ (cualificación del diseño)
Protocolo completo de cualificación del diseño · Documento original (inglés)
Solicitar al equipo comercial
Certificados de materiales
Composición del acero inoxidable 316L · Documento original (inglés)
Solicitar al equipo comercial