Startseite / Maschinen / Rohrschleuder / SED-42LXJ-T 45-Type Tubular Centrifuge (Clarification Type)

SED-42LXJ-T

Auf Anfrage

SED-42LXJ-T

SED · SED-42LXJ-T · Hervorgehoben

SED-42LXJ-T — SED-42LXJ-T 45-Type Tubular Centrifuge

Die vollständige Beschreibung dieses Modells wird noch übersetzt. Lesen Sie die englischen Details oder fragen Sie unser Team nach weiteren Informationen. English

SED-42LXJ-T is a 45-type clarification-type tubular centrifuge for separating dilute, viscous emulsions and suspensions where solid-phase particles are extremely fine and density differences between phases are very small

Variante wählen (1)

Lieferzeit

Auf Anfrage

Durchsatz

80 L/h

Funktionsweise

Liquid feed enters the bottom of a vertical thin-walled rotating bowl through a feeding nozzle. Centrifugal force at up to ~18,500 G drives the heavier phase (solids) to adhere to the bowl wall while clarified liquid overflows the top into the collection pan. When the bowl fills with solids, the machine is stopped, the bowl removed via wrench, and solids scraped out. A check-valve bowl cover prevents back-flow contamination on stop. Voltage-regulator stepless speed control (max 175V) plus high-speed belt drive lets operators tune G-force to material characteristics. Optional cooling coil maintains feed temperature for heat-sensitive bio products.

Prozessbeschreibung

1Liquid feed enters the bottom of a vertical thin-walled rotating bowl through a feeding nozzle.

2Centrifugal force at up to ~18,500 G drives the heavier phase (solids) to adhere to the bowl wall while clarified liquid overflows the top into the collection pan.

3When the bowl fills with solids, the machine is stopped, the bowl removed via wrench, and solids scraped out.

4A check-valve bowl cover prevents back-flow contamination on stop.

5Voltage-regulator stepless speed control (max 175V) plus high-speed belt drive lets operators tune G-force to material characteristics.

6Optional cooling coil maintains feed temperature for heat-sensitive bio products.

Technische Daten

Technische Daten für Variante: SED-42LXJ-T clarification-type bowl (liquid-solid separation only)

Technische Daten

Modell

SED-42LXJ-T

Durchsatz

80 L/h

Versorgung

Single-phase series motor with voltage regulator (max 175 V output; start at 125-150 V). Reliable ground connection on machine body. Vent pipe if separating toxic materials. Optional cooling water supply for bioengineering jacket.

Konformitätsangaben

Manufactured per ZBJ7708-89 'Tubular Separator Technical Specification' (China). Idle/load vibration intensity <= 7.1 mm/s; load motor temperature rise <= 30 C; load regulator temperature rise <= 25 C; idle speed reduction allowable 1%, loaded 3%. Bowl balance precision A=2.5 grade; total de-weight of bowl < 3.4 g; bowl outer-circle radial jump for generatrix < 0.03 mm. Spindle-end radial jump after assembly <= 0.10 mm. 5-hour continuous test-run inspection before shipment.

Abmessungen

Aufstellfläche

Bench-top mounted via four foundation bolts onto rubber shock pads; level the machine via plummet centering on the feeding nozzle. Position voltage regulator control cabinet within easy view/reach of operator. Requires reliable ground connection.

Werkstoffe

Kontaktwerkstoffe

304 stainless steel for all material-wetted parts (bowl,spindle,nozzle,liquid collection pan,cover); PTFE seal washers; special grease for high-speed bearings

Gehäusewerkstoffe

Cast machine body with rubber shock pads on four foundation bolts; aluminum belt cover with ball-nut fastener; high-speed belt; series single-phase motor with voltage regulator control cabinet

Wesentliche Merkmale

Bowl 42 mm ID x 225 mm H, 0.36 L volume

Variable speed 10,000-28,000 rpm (voltage regulator stepless, max 175 V)

Separation factor approximately 18,500 G

Continuous throughput 80 L/h (clarification mode)

Flexible-suspension spindle with spring-coupled upper/lower halves dampens vibration

Single-phase series motor + high-speed belt drive: smooth start, low noise

Check-valve bowl cover prevents back-flow contamination on stop

All wetted parts 304 stainless steel

Bench-top mountable via four foundation bolts on rubber shock pads

Bowl dynamic-balance precision A=2.5 grade; total de-weight of bowl < 3.4 g

Vibration intensity <= 7.1 mm/s (loaded and idling)

Load motor temperature rise <= 30 C; voltage regulator <= 25 C

5-hour continuous test-run validation before delivery

Bowl radial jump of spindle end <= 0.10 mm after assembly

Idle speed reduction allowable 1%; loaded 3% (per ZBJ7708-89)

Highest centrifugal force in bench-top class for ultra-fine particle separation

Suitable for small-batch, high-mix lab work and pilot bioengineering

Gives purer liquid + drier solid than basket centrifuges

Optional cooling coil enables temperature-sensitive bio separation

Modular: switch between clarification and 3-phase separation bowls

Stepless speed control without VFD (low-cost, simple, high-reliability)

Anwendungen

Vegetable/animal oil refining (residue clarification)

Vaccine, blood serum and biological broth clarification

Lubricant and resin emulsion clarification

Pharmaceutical intermediate purification (lab/pilot)

Food fermentation broth solids removal

Fine chemical pigment/dye separation

Lab-scale yeast/bacteria recovery

Essential oil and fragrance clarification

Branchen

Pharmaceutical (API, biologics)

Bioengineering / biotechnology

Edible oil and fat refining

Food fermentation

Fine chemical / pigment / dye

Vaccine / serum production

Research labs and pilot plants

SED

Sprechen Sie mit SED Sales Team

Maschinenspezialisten · Kontakt per WhatsApp

Geschäftszeiten und Verfügbarkeit beim Team erfragen

+86 139 5885 3738

E-Mail senden Auf WhatsApp chatten →30-Minuten-Gespräch anfragen →

Reinigung und Wartung

After bowl fills with solids: close feed valve, wait several minutes, press stop. After bowl fully halts, remove bowl with bowl wrench, open with bottom-shaft wrench, scrape solids out with scraper/rake, clean carefully, reinstall with attention to PTFE seal washer (leakage occurs if omitted). Lubrication: high-speed bearings every 2-3 months with special high-speed grease; sliding bearings in liquid-in seat are self-lubricating, apply a little grease at each use. Spindle (spring-coupled halves) repairs must be returned to manufacturer.

Dokumentation

Datenblatt (PDF)

Überblick, technische Daten und Abmessungen · Originaldokument (Englisch)

Beim Vertrieb anfragen

Bedienhandbuch

Einrichtung, Betrieb und Fehlersuche · Originaldokument (Englisch)

Beim Vertrieb anfragen

Vergleichsdatenblatt (Standard und Economy)

Vergleich der Konfigurationen · Originaldokument (Englisch)

Beim Vertrieb anfragen

IQ / OQ / PQ-Protokolle

Validierungsunterlagen zur GMP-Konformität · Originaldokument (Englisch)

Beim Vertrieb anfragen

FAT / SAT-Protokolle

Abnahmeprüfungen im Werk und vor Ort · Originaldokument (Englisch)

Beim Vertrieb anfragen

CAD-Zeichnungen (STEP / IGES / DWG)

Konstruktionszeichnungen für die Aufstellung · Originaldokument (Englisch)

Beim Vertrieb anfragen

Kalibrierzertifikate

Schallpegel, Erdungswiderstand, Spannungsfestigkeit und Rauheit · Originaldokument (Englisch)

Beim Vertrieb anfragen

DQ (Designqualifizierung)

Vollständiges Designqualifizierungsprotokoll · Originaldokument (Englisch)

Beim Vertrieb anfragen

Werkstoffzeugnisse

Zusammensetzung des Edelstahls 316L · Originaldokument (Englisch)

Beim Vertrieb anfragen