صالة عرض في أونتاريو، كاليفورنيا · استفسر عن الدعم في وجهتك
SED-60ZQ-J
حسب الطلب
SED-60ZQ-J
SED · SED-60ZQ-J · مميز

SED-60ZQ-J — Electric Steam Generator

لا تزال ترجمة الوصف الكامل لهذا الطراز قيد العمل. راجع التفاصيل بالإنجليزية أو اطلب المعلومات من فريقنا. English

SED-60ZQ-J 60kW inspection-exempt electric steam generator. Water capacity below 30L — within the national exemption from boiler-use license. Rated steam output 85kg/h, saturated steam temperature 171°C, rated pressure 0

CEBoiler-use license exempt (water capacity <30L)
مدة التسليم
حسب الطلب
الطاقة الإنتاجية
تواصل معنا

مبدأ العمل

Water is loaded into the boiler body. Depending on steam demand, one, two or all three 20kW heating element groups are activated. The elements heat the water to produce saturated steam(171°C / 0.7MPa) which is delivered through the DN15 steam outlet. Three-level water-level control(high/mid/low) prevents dry-burn on water stoppage; dual pressure controllers automatically cut power if pressure exceeds the set point; a full-lift safety valve opens at 0.73MPa for additional pressure relief; a wall-temperature sensor cuts power and triggers an alarm if the furnace wall exceeds 165°C.

وصف سير العمل
1Water is loaded into the boiler body.
2Depending on steam demand, one, two or all three 20kW heating element groups are activated.
3The elements heat the water to produce saturated steam(171°C / 0.7MPa) which is delivered through the DN15 steam outlet.
4Three-level water-level control(high/mid/low) prevents dry-burn on water stoppage; dual pressure controllers automatically cut power if pressure exceeds the set point; a full-lift safety valve opens at 0.73MPa for additional pressure relief; a wall-temperature sensor cuts power and triggers an alarm if the furnace wall exceeds 165°C.

المواصفات الفنية

مواصفات التكوين: SED-60ZQ-J

المواصفات

الطراز
SED-60ZQ-J
الجهد
380V 50Hz 3Φ
القدرة
60 kW

الأبعاد

الطول
790 mm
العرض
520 mm
الارتفاع
1260 mm

المواد

مواد التلامس
316L seamless stainless-steel heating tubes
مواد الهيكل
Anti-corrosion-treated boiler body and fittings

الخصائص الرئيسية

Boiler-use license exempt(water capacity <30L)
Three independent 20kW heating-tube groups with stepped adjustment
Each group equipped with its own leakage circuit breaker
316L seamless SS heating tubes + imported high-temperature magnesium powder, rated 1000°C
Flange-type assembly for easy tube replacement
Water-electricity separated electrical cabinet
Three-level water-level control(high/mid/low) prevents dry-burn
Dual pressure control, 0.7MPa working pressure
Full-lift safety valve at 0.73MPa for overpressure relief
Furnace-wall temperature protection: auto cut-off above 165°C + audible-visual alarm
LCD display for heater, water level, pump, pressure and fault status
Outlet DN15 / Inlet DN15 / Blowdown DN20
No boiler-use license required — eliminates compliance paperwork
Stepped group control avoids large-boiler low-load energy waste
CE certified
Fully automatic operation; simple installation — just connect power and water

التطبيقات

Steam supply for pharmaceutical manufacturing processes
Food steaming / sterilisation steam
Chemical reaction vessel heating
Auxiliary steam for small-to-medium production lines

القطاعات

الأدوية
الأغذية والمشروبات
Chemical
Health & nutraceuticals
المختبرات

العلامات التجارية للمكونات

Air switch (with leakage protection)
Chint
AC contactor
LS
SED
تواصل مع SED Sales Team
متخصصو المعدات · تواصل عبر واتساب
استفسر عن مواعيد العمل وتوفر الفريق

الامتثال

CE
Boiler-use license exempt(water capacity <30L)

الوثائق

ورقة البيانات (PDF)
نظرة عامة على المعدات والمواصفات والأبعاد · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
دليل التشغيل
التركيب والتشغيل واستكشاف الأعطال · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
ورقة مقارنة (قياسي واقتصادي)
مقارنة التكوينات · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
بروتوكولات IQ / OQ / PQ
وثائق التحقق لمطابقة GMP · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
بروتوكولات FAT / SAT
اختبارات القبول في المصنع وفي الموقع · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
رسومات CAD (STEP / IGES / DWG)
رسومات هندسية لتخطيط المنشأة · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
شهادات المعايرة
مستوى الصوت ومقاومة التأريض والعزل وخشونة السطح · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
DQ (تأهيل التصميم)
بروتوكول كامل لتأهيل التصميم · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
شهادات المواد
تركيب الفولاذ المقاوم للصدأ 316L · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
SED
واتساب · مبيعات SED
التواصل مع المبيعات · واتساب
→