Início / Equipamentos / Seladora contínua de banda padrão e grande FD / FD1 / Continuous Band Sealer

SED-900FD-C

Consultar

SED · SED-900FD-C · 2 unidades vendidas

SED-900FD-C — Continuous Band Sealer

A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English

SED-900FD-C is a continuous (band) bag sealer that performs continuous bag conveying, heat sealing and embossed/coded printing in one pass. Designed for sealing plastic film bags of various materials in food, pharmaceuti

Escolher variante (1)

Prazo de entrega

Consultar

Capacidade de produção

12 m/min (sealing speed)

Como funciona

After power-on, electro-thermal heaters in the upper and lower heating blocks rapidly heat to the temperature-controller setpoint. The bag's open edge enters between two PTFE/glass-fiber sealing belts that pass through (1) a heated zone (upper + lower heating blocks) where the film melts and fuses, (2) a pressing/cooling zone (upper + lower cooling blocks plus middle pressure wheel) that sets the seal and (3) an embossing/coding wheel that imprints stripes, reticulated pattern or date code. A stepless-speed reduction-gearbox motor (ZYT6-01) drives the belts and conveyor; the conveyor table can be adjusted in front-back and up-down direction to align with the bag's seal line. A cooling fan keeps belts and frame within safe temperature.

Processo de funcionamento

1After power-on, electro-thermal heaters in the upper and lower heating blocks rapidly heat to the temperature-controller setpoint.

2The bag's open edge enters between two PTFE/glass-fiber sealing belts that pass through (1) a heated zone (upper + lower heating blocks) where the film melts and fuses, (2) a pressing/cooling zone (upper + lower cooling blocks plus middle pressure wheel) that sets the seal and (3) an embossing/coding wheel that imprints stripes, reticulated pattern or date code.

3A stepless-speed reduction-gearbox motor (ZYT6-01) drives the belts and conveyor; the conveyor table can be adjusted in front-back and up-down direction to align with the bag's seal line.

4A cooling fan keeps belts and frame within safe temperature.

Especificações técnicas

Especificações da variante: SED-900FD-C base continuous band sealer (this model)

Especificações

Modelo

SED-900FD-C

Capacidade de produção

12 m/min (sealing speed)

Tensão

220V 50-60Hz (110V variant available)

Utilidades

Power supply 220V 50-60Hz (110V/60Hz model also available); total ~650 W (driving motor 50 W + heating 2 x 300 W). Reliable earth ground required. Operating environment: clean, dry, well-ventilated.

Detalhes de conformidade

Built-in emergency-stop switch; protective cover over heating area; cooling fan switch; constant-temperature control; standalone bench-top — install on flat floor with proper grounding.

Potência

0.65 kW

Dimensões

Comprimento

820 mm

Largura

400 mm

Altura

300 mm

Peso

23 kg

Área de instalação

Approx. 820 x 400 mm bench-top footprint, height 300 mm. Ensure flat floor and good earth ground; can be configured horizontal, vertical, or with stand feet.

Materiais

Materiais de contato

Stainless and plated steel sealing-block surfaces; PTFE/glass-fiber sealing belts; rubber wheel; embossing steel wheel

Materiais do corpo

Painted steel machine body; ABS roller head covers; plastic junction plates; rubber feet

Características principais

Continuous carry + heat seal + embossed/date-code printing in one operation

Sealing speed 0-12 m/min, stepless adjustable

Sealing width 6-12 mm

Temperature range 0-300°C with electronic constant-temperature control

Single-layer film max thickness ≤0.08 mm

Conveyor max loading 3 kg

Horizontal, vertical or stand-feet installation orientations

Steel-wheel embossing/coding wheel for stripes, reticulate or date marks

Adjustable up/down heating block and cooling block gap (one bag-thickness rule)

PTFE/glass-fiber sealing belts (replaceable)

Reduction-gearbox motor (ZYT6-01) with worm gear

Optional intelligent digital temperature controller

Cooling fan for belt/heating-block thermal management

Emergency-stop switch on panel

Compact (~23 kg) bench-top sealer — fits small workshops or pairs with packaging lines

Wide film-material compatibility (PE, PP, OPP, laminates, etc.)

Stepless variable speed for matching upstream/downstream line speed

Low failure rate, simple electrical control, long service life

Affordable entry-level pharma/food bag sealer

12-month warranty since installation, lifetime maintenance support

Aplicações

Heat sealing of plastic film bags in food packaging

Heat sealing of pharmaceutical and medical pouches

Sealing of chemical product bags

Sealing of daily consumer-goods bags

Continuous batch packaging with date-code or stripe embossing

Setores

Pharmaceutical packaging

Food packaging

Embalagem de produtos químicos

Consumer goods / daily expenses

Marcas dos componentes

ZYT6-01 reduction-gearbox motor

SED

Fale com SED Sales Team

Especialistas em equipamentos · contato pelo WhatsApp

Consulte o horário e a disponibilidade da equipe

+86 139 5885 3738

Enviar e-mail Conversar no WhatsApp →Solicitar chamada de 30 minutos →

Limpeza e manutenção

Stop the machine immediately and clean any film/dirt off the sealing belts and heating blocks before they char (do not touch hot parts; let them cool first). Before powering off after a run, set temperature to zero, run the cooling fan with the belts still moving until heating-block temperature drops below 80°C, then turn the fan and main power off. Daily: check all moving-part screws for looseness; keep electrical parts dry and ventilated.

Documentação

Ficha técnica (PDF)

Visão geral do equipamento, especificações e dimensões · Documento original (inglês)

Solicitar à equipe de vendas

Manual do operador

Instalação, operação e diagnóstico · Documento original (inglês)

Solicitar à equipe de vendas

Folha comparativa (Padrão e Econômica)

Comparação das configurações · Documento original (inglês)

Solicitar à equipe de vendas

Protocolos IQ / OQ / PQ

Documentação de validação para conformidade GMP · Documento original (inglês)

Solicitar à equipe de vendas

Protocolos FAT / SAT

Testes de aceitação na fábrica e no local · Documento original (inglês)

Solicitar à equipe de vendas

Desenhos CAD (STEP / IGES / DWG)

Desenhos de engenharia para a instalação · Documento original (inglês)

Solicitar à equipe de vendas

Certificados de calibração

Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)

Solicitar à equipe de vendas

DQ (qualificação do projeto)

Protocolo completo de qualificação do projeto · Documento original (inglês)

Solicitar à equipe de vendas

Certificados de materiais

Composição do aço inoxidável 316L · Documento original (inglês)

Solicitar à equipe de vendas