SED-40SBF-E
Consultar
SED-40SBF-E
SED · SED-40SBF-E · Em destaque
SED-40SBF-E — Embaladora com filme
A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English
SED-40SBF-E strip-pack / film packaging machine for composite heat-sealed packaging of pharmaceuticals, food and similar products. Uses flat-press heat sealing for flat, smooth packs. Built to pharmaceutical GMP and UL s
Prazo de entrega
Consultar
Capacidade de produção
20–40 strokes/min
Como funciona
Composite heat-seal film (0.03–0.08 mm thick) is unwound under tension control with optional deviation correction. The upper film carries the product items, which are separated to width by a swing-arm slitter (imported FDA-grade stainless blades). Servo-driven traction sets pitch (40–120 mm, up to 170 mm special). Items are placed between upper and lower films. At the heat-seal station, an engraved plate applies flat-press heat sealing (4 kW, PID K-type thermocouple control); air-cushion lift raises the plate on stoppage to prevent film deformation. A servo-driven die-cutter (precision ±0.2 mm, ball-location) separates finished packs; ejector pins assist smooth pack discharge. Batch coding is applied inline. Automatic alarms: low film, broken strip, vision reject.
Processo de funcionamento
1Composite heat-seal film (0.03–0.08 mm thick) is unwound under tension control with optional deviation correction.
2The upper film carries the product items, which are separated to width by a swing-arm slitter (imported FDA-grade stainless blades).
3Servo-driven traction sets pitch (40–120 mm, up to 170 mm special).
4Items are placed between upper and lower films.
5At the heat-seal station, an engraved plate applies flat-press heat sealing (4 kW, PID K-type thermocouple control); air-cushion lift raises the plate on stoppage to prevent film deformation.
6A servo-driven die-cutter (precision ±0.2 mm, ball-location) separates finished packs; ejector pins assist smooth pack discharge.
7Batch coding is applied inline.
8Automatic alarms: low film, broken strip, vision reject.
Especificações técnicas
Especificações da variante: SED-40SBF-E
Especificações
Modelo
SED-40SBF-E
Capacidade de produção
20–40 strokes/min
Tensão
3-phase 5-wire 380V 50/60Hz
Potência
8.5 kW
Pressão de ar
0.4-0.7 MPa, 25 L/min
Dimensões
Comprimento
3500 mm
Largura
1150 mm
Altura
1900 mm
Materiais
Materiais de contato
FDA-compliant imported stainless steel slitter blades; FDA-grade silicone-coated traction rollers; ceramic cutting blades; PTFE suction cups
Materiais do corpo
304 stainless steel exterior; tempered transparent glass safety guards; sealed stainless partition between transmission and operation areas
Características principais
Punching speed 20–40 strokes/min (standard pack 45 × 70 × 0.1 mm Alu/Alu)
Wrapping film width 200–260 mm; product film width 90–120 mm
Heat-seal power 4 kW with PID K-type thermocouple control
Air-cushioned heat seal: cylinder auto-lifts plate at stop to prevent deformation
Servo traction: pitch 40–120 mm (max 170 mm special), adjustable on HMI
Drive zone fully sealed from operation zone by stainless steel plate to prevent cross-contamination
304 stainless exterior with tempered glass safety guards
FDA Part 11 electronic signatures, electronic records, audit trail, user management
Safety: door interlock (auto-stop on door open), emergency stop, warning lights (red/amber/green)
Machine can be split for transport, rejoined with locating pins and bolts
Automatic alarms: low-film, broken-strip, counter, batch code, vision reject
Pharmaceutical-grade strip-packer at significantly lower cost than imported equivalents
FDA 21 CFR Part 11 compliant electronic records — ready for computer validation
Comprehensive auto-detection: low film, broken-strip, vision inspection, batch coding
GMP-friendly stainless construction with cross-contamination prevention between drive and operation zones
Aplicações
Strip / composite-film packaging of tablets and capsules
Unit-dose heat-sealed sachet packaging
Pharmaceutical and food product composite packaging
Setores
Farmacêutico
Food
Health Food
Personal Care
Marcas dos componentes
HMI Display (TP 900)
Siemens
PLC (S7-1200)
Siemens
Frequency Inverter (V20)
Siemens
Upper Film Unwind Motor (FZ25K)
Lanling
Lower Film Unwind Magnetic Brake (FZ 25K)
Lanling
Relay (RXM 24VDC)
Schneider
Pneumatic Components
SMC
Vacuum Generator (ZL 112)
SMC
Solenoid Valve (SY5120)
SMC
Power Supply (LRS-100-24)
Mean Well
Web-deviation Corrector (ECM301)
Bozen
Static Generator
FRASER
Static Eliminator
FRASER
SED
Fale com SED Sales Team
Especialistas em equipamentos · contato pelo WhatsApp
Consulte o horário e a disponibilidade da equipe
Conformidade
GMP-compliant
UL safety standard
FDA 21 CFR Part 11 (electronic records / signatures)
Documentação
Ficha técnica (PDF)
Visão geral do equipamento, especificações e dimensões · Documento original (inglês)
Solicitar à equipe de vendas
Manual do operador
Instalação, operação e diagnóstico · Documento original (inglês)
Solicitar à equipe de vendas
Folha comparativa (Padrão e Econômica)
Comparação das configurações · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos IQ / OQ / PQ
Documentação de validação para conformidade GMP · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos FAT / SAT
Testes de aceitação na fábrica e no local · Documento original (inglês)
Solicitar à equipe de vendas
Desenhos CAD (STEP / IGES / DWG)
Desenhos de engenharia para a instalação · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de calibração
Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)
Solicitar à equipe de vendas
DQ (qualificação do projeto)
Protocolo completo de qualificação do projeto · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de materiais
Composição do aço inoxidável 316L · Documento original (inglês)
Solicitar à equipe de vendas