SED-18WB-C
Consultar
SED-18WB-C
SED · SED-18WB-C · Em destaque
SED-18WB-C — Box-Type Microwave Vacuum Dryer
A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English
SED-18WB-C is a box-type microwave vacuum dryer combining microwave energy with vacuum technology for low-temperature dehydration, drying, and sterilization of heat-sensitive materials including TCM extracts, herbs, heal
Prazo de entrega
Consultar
Capacidade de produção
Fale conosco
Como funciona
Under vacuum, water boiling point is lowered (e.g. 40°C at 7.37 kPa). Microwave radiation at 2450 MHz heats materials simultaneously from inside and outside — energy penetrates and decays exponentially, converting to heat. The system comprises a microwave generator, vacuum drying chamber, material rotating tray, vacuum system, and electronic control system. Microwaves are fed in from both left and right sides of the unit to ensure uniform heating. Magnetrons are air-cooled; a far-infrared probe monitors temperature in real time.
Processo de funcionamento
1Under vacuum, water boiling point is lowered (e.g.
240°C at 7.37 kPa).
3Microwave radiation at 2450 MHz heats materials simultaneously from inside and outside — energy penetrates and decays exponentially, converting to heat.
4The system comprises a microwave generator, vacuum drying chamber, material rotating tray, vacuum system, and electronic control system.
5Microwaves are fed in from both left and right sides of the unit to ensure uniform heating.
6Magnetrons are air-cooled; a far-infrared probe monitors temperature in real time.
Especificações técnicas
Especificações da variante: SED-18WB-C
Especificações
Modelo
SED-18WB-C
Tensão
3-phase 4-wire 380V ±5%, 50Hz ±1%
Detalhes de conformidade
Microwave leakage per GB10436-89 (company standard ≤2 mW/cm², far exceeding national standard ≤5 mW/cm²); electrical safety per GB 5226.1-2008; safety specification per GB 5959.6-2008.
Potência
19.5 kW
Dimensões
Comprimento
1900 mm
Largura
1500 mm
Altura
1900 mm
Materiais
Materiais de contato
SUS304-2B stainless steel (inner wall, 6 mm polished)
Materiais do corpo
Outer wall SUS304-2B 1.2 mm (matte brushed + laminate); inner wall SUS304-2B 6 mm (polished); frame 8# channel steel + ∠5×5 angle steel
Características principais
Microwave power 18 kW, frequency 2450 MHz±25 MHz
Total installed power ≈19.5 kW
Microwave action zone 1000×1000×1200 mm
Trays 500×500×50 mm, standard 6 layers
Drying temperature 40–120°C user-settable
Microwave leakage <2 mW/cm² (national standard <5 mW/cm²)
Dual-side microwave feed-in ensures uniform heating
Magnetron air-cooling + independent fan extends magnetron lifespan
Dedicated high-voltage microwave driver; each magnetron independently controlled
German Optris far-infrared thermometer (0–300°C)
PLC + 5.7-inch color touchscreen
Door interlock + auto power-off on door open (leakage prevention)
LCD video monitoring to observe material condition and arc events
Outer wall SUS304-2B 1.2 mm matte brushed + laminate; inner wall SUS304-2B 6 mm polished
Flat-rotation design maximizes chamber volume utilization
Trays freely removable for cleaning
Drying time only 45–70 minutes; energy cost ~8–10× lower than steam vacuum drying
Drying temperature 45–60°C freely adjustable; 0% material loss
Lower active-ingredient loss than competing equipment
Footprint only 20% of steam vacuum dryers, 30% of spray dryers
No three wastes, no radiation hazard, no dust pollution
Simultaneous drying and sterilization for TCM materials/powders
Multi-magnetron independent control — one unit failure does not stop the machine
Aplicações
TCM extract dehydration and drying (replaces vacuum dryers)
TCM herbs / powders drying + sterilization
Health food and food product dehydration
Fruit and vegetable deep processing
Low-temperature chemical concentration and crystal water removal
Enzyme preparation drying
Laboratory use in research institutes and universities
Setores
Pharmaceutical / TCM
Health food
Food processing
Chemical industry
Materials engineering
Biotechnology
Agricultural by-product deep processing
Research & academia
Marcas dos componentes
Outer / inner chamber panels
POSCO Zhangpu SUS304-2B
Motor / gearbox RV130-WB150
Tianmai
Cooling fan 200T/220V
(Nanjing)
5.7-inch touchscreen
Xinje (XINJE)
Magnetron
Panasonic / Toshiba
Microwave-dedicated high-voltage driver
Custom
PLC KLG-120S
LG
Far-infrared temperature sensor 0–300°C
Optris
Frame and reinforcement
Nanjing Steel (8# channel + ∠5×5 angle steel)
SED
Fale com SED Sales Team
Especialistas em equipamentos · contato pelo WhatsApp
Consulte o horário e a disponibilidade da equipe
Conformidade
GB10436-89 Microwave Radiation Protection
GB 5959.6-2008 Industrial Microwave Heating Equipment Safety Specification
GB 5226.1-2008 Machinery Electrical Safety — General Technical Conditions
Documentação
Ficha técnica (PDF)
Visão geral do equipamento, especificações e dimensões · Documento original (inglês)
Solicitar à equipe de vendas
Manual do operador
Instalação, operação e diagnóstico · Documento original (inglês)
Solicitar à equipe de vendas
Folha comparativa (Padrão e Econômica)
Comparação das configurações · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos IQ / OQ / PQ
Documentação de validação para conformidade GMP · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos FAT / SAT
Testes de aceitação na fábrica e no local · Documento original (inglês)
Solicitar à equipe de vendas
Desenhos CAD (STEP / IGES / DWG)
Desenhos de engenharia para a instalação · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de calibração
Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)
Solicitar à equipe de vendas
DQ (qualificação do projeto)
Protocolo completo de qualificação do projeto · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de materiais
Composição do aço inoxidável 316L · Documento original (inglês)
Solicitar à equipe de vendas