SED-100WB-A
Consultar
SED-100WB-A
SED · SED-100WB-A · Em destaque
SED-100WB-A
A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English
SED-100WB-A Microwave Vacuum Dryer (tank internal 6150×Ø1800 mm, outer 6500×2800×2500 mm). Microwave power ≥100 kW, total installed power 140 kW; per-batch capacity 150–200 kg. Composed of frame, vacuum tank, microwave s
Prazo de entrega
Consultar
Capacidade de produção
150–200 kg/
Como funciona
Material is spread on food-grade PP trays and loaded into 5 SUS304 lifting baskets (60 trays total), then moved into the vacuum tank by trolley on rails. After the vacuum pumps pull the chamber to ≥−0.09 MPa, 100 top-mounted microwave magnetrons feed microwave energy via a waveguide matrix into the material; moisture evaporates rapidly at low temperature and is exhausted via the top vacuum port. Magnetrons are water-cooled by a chilled-water circuit; the power supply is air-cooled by a centrifugal fan. Temperature is monitored by 5 infrared sensors with automatic cutoff protection at the magnetron top. The entire batch process is controlled by Xinje PLC automation.
Processo de funcionamento
1Material is spread on food-grade PP trays and loaded into 5 SUS304 lifting baskets (60 trays total), then moved into the vacuum tank by trolley on rails.
2After the vacuum pumps pull the chamber to ≥−0.09 MPa, 100 top-mounted microwave magnetrons feed microwave energy via a waveguide matrix into the material; moisture evaporates rapidly at low temperature and is exhausted via the top vacuum port.
3Magnetrons are water-cooled by a chilled-water circuit; the power supply is air-cooled by a centrifugal fan.
4Temperature is monitored by 5 infrared sensors with automatic cutoff protection at the magnetron top.
5The entire batch process is controlled by Xinje PLC automation.
Especificações técnicas
Especificações da variante: SED-100WB-A
Especificações
Modelo
SED-100WB-A
Capacidade de produção
150–200 kg/
Tensão
380V±10% 50Hz±1%
Utilidades
Electrical: 3-phase 5-wire 380V±10%, 50Hz±1% (neutral must match phase conductor size); total power 140 kW (microwave ≥100 kW); chilled cooling water (magnetron water cooling + condenser); optional compressed air (if pneumatic controls selected); exhaust duct (buyer's scope); ambient temperature −5 to 40°C, relative humidity ≤80%, no corrosive or explosive gases
Detalhes de conformidade
Microwave leakage complies with GB10436-89 (≤5 mW/cm²). Electrical safety complies with GB5226. Welds polished and ground — no burrs, no fouling, no gas pores, no slag inclusions, no cracks. Inner and outer walls polished to Ra 0.6 μm. Exterior: no burrs, scratches, uneven cuts, dents, breaks, colour variation, bubbles, pinholes, oxidation rust, or fixture marks.
Potência
140 kW
Dimensões
Comprimento
6500 mm
Largura
2800 mm
Altura
2500 mm
Área de instalação
Outer dimensions 6500×2800×2500 mm; tank 6150×Ø1800 mm; plus two Grey 20 HP chillers (1950×1100×1780 mm each)
Materiais
Materiais de contato
SUS304 8 mm thick (vacuum tank 6150×Ø1800 mm); SUS304 lifting basket frames; food-grade PP trays 1000×280×80 mm with PTFE cloth liner
Materiais do corpo
Channel-steel base and levelling feet; stainless-steel square-tube and stainless-steel plate outer frame panels (removable); SUS304 power supply rack
Características principais
Microwave power ≥100 kW (total installed power 140 kW)
Per-batch capacity 150–200 kg
Vacuum level ≥−0.09 MPa (2 × 11 kW Zibo Huinuo water-ring vacuum pumps)
8 mm thick SUS304 pressure-rated tank body; ceramic plate seal at microwave interface
100 sets oil-immersed sealed microwave power supplies, waveguide matrix uniform feed
Toshiba water-cooled magnetrons + top thermal protection switch
5 lifting baskets (SUS304) × 12 PP trays = 60 trays/batch (+ 70 spare = 130 total)
Food-grade PP trays 1000×280×80 mm with PTFE liner
5.8 m material distribution trolley on rails
Xinje PLC automatic control + 5-set infrared temperature monitoring
Microwave leakage choke device + auto-power-off on door open
Optional in-chamber camera + LCD monitor
Complies with GB10436-89 (≤5 mW/cm²) and GB5226 electrical safety standards
Low-temperature vacuum environment protects heat-sensitive materials
Oil-immersed sealed power supply — long life, low energy consumption
Welds ground and polished: no burrs, no fouling, no pores, no slag, no cracks; inner/outer wall polished to Ra 0.6 μm
Removable outer frame panels for easy maintenance
Aplicações
Vacuum microwave drying of heat-sensitive materials
Low-temperature drying of herbal medicine / food / chemical raw materials
Batch drying of granules / powder / slabs
Setores
Farmacêutico
Traditional Chinese Medicine
Food
Chemical
Marcas dos componentes
Toshiba magnetrons (water-cooled)
Xinje PLC automatic control system
Chint electrical components
Zibo Huinuo 11 kW water-ring vacuum pumps (×2)
Grey 20 HP chillers (×2, 20 kW each)
SED
Fale com SED Sales Team
Especialistas em equipamentos · contato pelo WhatsApp
Consulte o horário e a disponibilidade da equipe
Conformidade
GB10436-89 (microwave leakage ≤5 mW/cm²)
GB5226 (electrical safety)
Limpeza e manutenção
Removable outer frame panels allow easy daily maintenance access. All welds polished flush — no burrs, no fouling; weld spatter fully removed. Inner and outer walls polished to Ra 0.6 μm.
Documentação
Ficha técnica (PDF)
Visão geral do equipamento, especificações e dimensões · Documento original (inglês)
Solicitar à equipe de vendas
Manual do operador
Instalação, operação e diagnóstico · Documento original (inglês)
Solicitar à equipe de vendas
Folha comparativa (Padrão e Econômica)
Comparação das configurações · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos IQ / OQ / PQ
Documentação de validação para conformidade GMP · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos FAT / SAT
Testes de aceitação na fábrica e no local · Documento original (inglês)
Solicitar à equipe de vendas
Desenhos CAD (STEP / IGES / DWG)
Desenhos de engenharia para a instalação · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de calibração
Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)
Solicitar à equipe de vendas
DQ (qualificação do projeto)
Protocolo completo de qualificação do projeto · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de materiais
Composição do aço inoxidável 316L · Documento original (inglês)
Solicitar à equipe de vendas