SED-1000QXJ-H
Consultar
SED-1000QXJ-H
SED · SED-1000QXJ-H · Em destaque
SED-1000QXJ-H — Large Industrial Parts/Utensil Washer
A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English
SED-1000QXJ-H large industrial parts washer for pharmaceutical and food-industry utensils: glassware,filling-line components,tablet-press parts,stainless filter housings,mixing tanks,fermenters,PP drums,hoses,and fitting
Prazo de entrega
Consultar
Capacidade de produção
Fale conosco
Como funciona
Utensils loaded on 316L stainless racks are rolled into the chamber on transfer trolleys. The automatic cycle progresses through pre-wash, detergent wash (peristaltic pump dosing), purified-water rinse, WFI rinse, WFI final spray-rinse, and hot-air drying. Conductivity electrode monitors the final rinse to automatically determine the clean endpoint. The sanitary-grade recirculation pump (VFD soft-start) maintains turbulent flow at monitored pressure to ensure wash effectiveness. Hot air passes through two H14 HEPA filters (one high-temp rated to 250 °C, one high-humidity rated) via spray arms on chamber top, bottom, and rack nozzles.
Processo de funcionamento
1Utensils loaded on 316L stainless racks are rolled into the chamber on transfer trolleys.
2The automatic cycle progresses through pre-wash, detergent wash (peristaltic pump dosing), purified-water rinse, WFI rinse, WFI final spray-rinse, and hot-air drying.
3Conductivity electrode monitors the final rinse to automatically determine the clean endpoint.
4The sanitary-grade recirculation pump (VFD soft-start) maintains turbulent flow at monitored pressure to ensure wash effectiveness.
5Hot air passes through two H14 HEPA filters (one high-temp rated to 250 °C, one high-humidity rated) via spray arms on chamber top, bottom, and rack nozzles.
Especificações técnicas
Especificações da variante: SED-1000QXJ-H
Especificações
Modelo
SED-1000QXJ-H
Tensão
380V/50Hz
Tensões suportadas
380V/50Hz (padrão)
Utilidades
Purified water: 0.25 MPa, DN25, 50 L/min (50 L per step); WFI: 0.25 MPa, DN25, 50 L/min; compressed air: 0.6 MPa, Φ8; drain: independent metal drain DN50, 50 L/min; exhaust: DN80, 7 m³/min (90 °C, can connect to clean-room plenum); electrical: 380V/50Hz, 24 kW
Detalhes de conformidade
Designed to meet GMP requirements; final-rinse conductivity verified against China Pharmacopoeia 2020 (four parts, 0681) purified-water standard. Supports DQ/IQ/OQ/FAT/SAT/PQ validation.
Potência
24 kW
Pressão de ar
0.6MPa φ8
Dimensões
Comprimento
2000 mm
Largura
1190 mm
Altura
2250 mm
Materiais
Materiais de contato
SUS316L (chamber Ra ≤ 0.4 µm; piping Ra ≤ 0.6 µm); PTFE (piping fittings)
Materiais do corpo
SUS316L interior; SUS304 exterior
Características principais
1.5D clean-piping design
316L SUS chamber interior, Ra ≤ 0.4 µm; all piping 316L, Ra ≤ 0.6 µm
Sanitary-grade VFD soft-start recirculation pump
Spray-arm monitoring system ensures wash coverage
Pneumatic auto-lifting door with silicon-rubber gas/water seal
39 standard programs + 200 customizable programs
Three-level password management (operator / system admin / parameter admin)
20,000 audit-trail records, exportable as non-editable PDF
Riboflavin spray-coverage test: 100% coverage validated
Two H14 HEPA filters (high-temp 250 °C + high-humidity rated)
Conductivity auto-endpoint detection (China Pharmacopoeia 2020, 0681)
Cleaning temp up to 93 °C; drying temp up to 120 °C, 18 kW water heater + 11.25 kW drying heater
1000 L chamber; 2000×1190×2250 mm (W×D×H)
3 wash racks + 2 transfer trolleys; ~90 min per cycle
PLC Siemens S7-1200 + 7-inch Siemens HMI
Meets GMP + China Pharmacopoeia 2020 purified-water conductivity standard
Complete validation documentation: DQ, IQ, OQ, FAT, SAT (PQ assistance available)
Conductivity auto-endpoint: no manual sampling needed for cycle release
Riboflavin 100% spray-coverage verified
Safe-state protection on power loss; restart requires operator confirmation
Modular design for fast component replacement; self-diagnostic alarm
Aplicações
Pharmaceutical utensil washing
Food-industry large-vessel cleaning
Filling-line component washing
Tablet-press component washing
Fermenter / mixing tank washing
Setores
Farmacêutico
Food / biotech
Marcas dos componentes
Siemens S7-1200 PLC (Germany)
Siemens 7-inch HMI (Germany)
PT100 temperature sensor — Feiyan / Zibo
MSX differential pressure switch — Dwyer / USA
MIK circulation-water pressure — Meikong / Hangzhou
SS-301211 conductivity electrode — Senshi / Zibo
KS sanitary recirculation pump — Sterling / Beijing
XBL-D pneumatic butterfly valve — Xibeilun / Zhejiang
XBL-2G pneumatic diaphragm valve — Xibeilun / Zhejiang
2RB2 blower — GREENCO / Zhejiang
H14 HEPA filter — Sujin Huatai / Suzhou
683K peristaltic pump — Chongqing Jieheng / Chongqing
EDR switching power supply — Meanwell / Taiwan
316L stainless wash racks; 304 stainless transfer trolleys
SED
Fale com SED Sales Team
Especialistas em equipamentos · contato pelo WhatsApp
Consulte o horário e a disponibilidade da equipe
Conformidade
GMP
China Pharmacopoeia 2020 0681 Purified Water conductivity standard
Limpeza e manutenção
Automated wash cycle performs pre-rinse, detergent wash, purified-water rinse, WFI rinse, WFI final spray-rinse, and hot-air drying (~90 min total). Conductivity endpoint automatic. Manual cleaning: open door, remove racks, rinse 316L chamber and piping.
Documentação
Ficha técnica (PDF)
Visão geral do equipamento, especificações e dimensões · Documento original (inglês)
Solicitar à equipe de vendas
Manual do operador
Instalação, operação e diagnóstico · Documento original (inglês)
Solicitar à equipe de vendas
Folha comparativa (Padrão e Econômica)
Comparação das configurações · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos IQ / OQ / PQ
Documentação de validação para conformidade GMP · Documento original (inglês)
Solicitar à equipe de vendas
Protocolos FAT / SAT
Testes de aceitação na fábrica e no local · Documento original (inglês)
Solicitar à equipe de vendas
Desenhos CAD (STEP / IGES / DWG)
Desenhos de engenharia para a instalação · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de calibração
Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)
Solicitar à equipe de vendas
DQ (qualificação do projeto)
Protocolo completo de qualificação do projeto · Documento original (inglês)
Solicitar à equipe de vendas
Certificados de materiais
Composição do aço inoxidável 316L · Documento original (inglês)
Solicitar à equipe de vendas