Accueil / Équipements / Machine de nettoyage / Large Industrial Parts/Utensil Washer

SED-1000QXJ-H

Sur devis

SED-1000QXJ-H

SED · SED-1000QXJ-H · En vedette

SED-1000QXJ-H — Large Industrial Parts/Utensil Washer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-1000QXJ-H large industrial parts washer for pharmaceutical and food-industry utensils: glassware,filling-line components,tablet-press parts,stainless filter housings,mixing tanks,fermenters,PP drums,hoses,and fitting

GMPChina Pharmacopoeia 2020 0681 Purified Water conductivity standard

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Utensils loaded on 316L stainless racks are rolled into the chamber on transfer trolleys. The automatic cycle progresses through pre-wash, detergent wash (peristaltic pump dosing), purified-water rinse, WFI rinse, WFI final spray-rinse, and hot-air drying. Conductivity electrode monitors the final rinse to automatically determine the clean endpoint. The sanitary-grade recirculation pump (VFD soft-start) maintains turbulent flow at monitored pressure to ensure wash effectiveness. Hot air passes through two H14 HEPA filters (one high-temp rated to 250 °C, one high-humidity rated) via spray arms on chamber top, bottom, and rack nozzles.

Processus de fonctionnement

1Utensils loaded on 316L stainless racks are rolled into the chamber on transfer trolleys.

2The automatic cycle progresses through pre-wash, detergent wash (peristaltic pump dosing), purified-water rinse, WFI rinse, WFI final spray-rinse, and hot-air drying.

3Conductivity electrode monitors the final rinse to automatically determine the clean endpoint.

4The sanitary-grade recirculation pump (VFD soft-start) maintains turbulent flow at monitored pressure to ensure wash effectiveness.

5Hot air passes through two H14 HEPA filters (one high-temp rated to 250 °C, one high-humidity rated) via spray arms on chamber top, bottom, and rack nozzles.

Caractéristiques techniques

Caractéristiques de la variante : SED-1000QXJ-H

Caractéristiques

Modèle

SED-1000QXJ-H

Tension

380V/50Hz

Tensions prises en charge

380V/50Hz (par défaut)

Fluides et énergie

Purified water: 0.25 MPa, DN25, 50 L/min (50 L per step); WFI: 0.25 MPa, DN25, 50 L/min; compressed air: 0.6 MPa, Φ8; drain: independent metal drain DN50, 50 L/min; exhaust: DN80, 7 m³/min (90 °C, can connect to clean-room plenum); electrical: 380V/50Hz, 24 kW

Détails de conformité

Designed to meet GMP requirements; final-rinse conductivity verified against China Pharmacopoeia 2020 (four parts, 0681) purified-water standard. Supports DQ/IQ/OQ/FAT/SAT/PQ validation.

Puissance

24 kW

Pression d’air

0.6MPa φ8

Dimensions

Longueur

2000 mm

Largeur

1190 mm

Hauteur

2250 mm

Matériaux

Matériaux en contact

SUS316L (chamber Ra ≤ 0.4 µm; piping Ra ≤ 0.6 µm); PTFE (piping fittings)

Matériaux du bâti

SUS316L interior; SUS304 exterior

Caractéristiques principales

1.5D clean-piping design

316L SUS chamber interior, Ra ≤ 0.4 µm; all piping 316L, Ra ≤ 0.6 µm

Sanitary-grade VFD soft-start recirculation pump

Spray-arm monitoring system ensures wash coverage

Pneumatic auto-lifting door with silicon-rubber gas/water seal

39 standard programs + 200 customizable programs

Three-level password management (operator / system admin / parameter admin)

20,000 audit-trail records, exportable as non-editable PDF

Riboflavin spray-coverage test: 100% coverage validated

Two H14 HEPA filters (high-temp 250 °C + high-humidity rated)

Conductivity auto-endpoint detection (China Pharmacopoeia 2020, 0681)

Cleaning temp up to 93 °C; drying temp up to 120 °C, 18 kW water heater + 11.25 kW drying heater

1000 L chamber; 2000×1190×2250 mm (W×D×H)

3 wash racks + 2 transfer trolleys; ~90 min per cycle

PLC Siemens S7-1200 + 7-inch Siemens HMI

Meets GMP + China Pharmacopoeia 2020 purified-water conductivity standard

Complete validation documentation: DQ, IQ, OQ, FAT, SAT (PQ assistance available)

Conductivity auto-endpoint: no manual sampling needed for cycle release

Riboflavin 100% spray-coverage verified

Safe-state protection on power loss; restart requires operator confirmation

Modular design for fast component replacement; self-diagnostic alarm

Applications

Pharmaceutical utensil washing

Food-industry large-vessel cleaning

Filling-line component washing

Tablet-press component washing

Fermenter / mixing tank washing

Secteurs

Pharmaceutique

Food / biotech

Marques des composants

Siemens S7-1200 PLC (Germany)

Siemens 7-inch HMI (Germany)

PT100 temperature sensor — Feiyan / Zibo

MSX differential pressure switch — Dwyer / USA

MIK circulation-water pressure — Meikong / Hangzhou

SS-301211 conductivity electrode — Senshi / Zibo

KS sanitary recirculation pump — Sterling / Beijing

XBL-D pneumatic butterfly valve — Xibeilun / Zhejiang

XBL-2G pneumatic diaphragm valve — Xibeilun / Zhejiang

2RB2 blower — GREENCO / Zhejiang

H14 HEPA filter — Sujin Huatai / Suzhou

683K peristaltic pump — Chongqing Jieheng / Chongqing

EDR switching power supply — Meanwell / Taiwan

316L stainless wash racks; 304 stainless transfer trolleys

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP

China Pharmacopoeia 2020 0681 Purified Water conductivity standard

Nettoyage et entretien

Automated wash cycle performs pre-rinse, detergent wash, purified-water rinse, WFI rinse, WFI final spray-rinse, and hot-air drying (~90 min total). Conductivity endpoint automatic. Manual cleaning: open door, remove racks, rinse 316L chamber and piping.