Início / Equipamentos / Gerador de ultrassom / Digital-Pulse-Drive Ultrasonic Generator (Digital-Display Module Type)

SED-1.5CSQ-C

Consultar

SED-1.5CSQ-C

SED · SED-1.5CSQ-C · Em destaque

SED-1.5CSQ-C — Digital-Pulse-Drive Ultrasonic Generator

A descrição completa deste modelo ainda está sendo traduzida. Consulte os detalhes em inglês ou solicite informações à nossa equipe. English

SED-1.5CSQ-C is a digital-pulse-drive ultrasonic generator in digital-display module format. Uses internationally advanced digital pulse drive technology: compared to traditional self-oscillating designs, it is more comp

Prazo de entrega

Consultar

Capacidade de produção

Fale conosco

Como funciona

Digital pulse drive replaces traditional self-oscillating topology. A frequency-tracking control loop keeps drive frequency locked to the transducer's resonant peak. Coarse frequency selection via toggle switch (20/25/28/40 kHz bands); fine trim via potentiometer W1. Power controlled by separate potentiometer. Timer: in time-display mode, press INC/DEC (long press) to set cleaning time; press ENTER to start timed cycle; set to 999 for continuous operation. FUNC key toggles between frequency and time display (ultrasonic pauses during toggle). Output current must not exceed rated maximum — size at 0.15 A/head for small arrays, 0.12 A/head for large arrays. Fault repair flowchart covers fan on / no ultrasonic, rectifier bridge check, transducer insulation check.

Processo de funcionamento

1Digital pulse drive replaces traditional self-oscillating topology.

2A frequency-tracking control loop keeps drive frequency locked to the transducer's resonant peak.

3Coarse frequency selection via toggle switch (20/25/28/40 kHz bands); fine trim via potentiometer W1.

4Power controlled by separate potentiometer.

5Timer: in time-display mode, press INC/DEC (long press) to set cleaning time; press ENTER to start timed cycle; set to 999 for continuous operation.

6FUNC key toggles between frequency and time display (ultrasonic pauses during toggle).

7Output current must not exceed rated maximum — size at 0.15 A/head for small arrays, 0.12 A/head for large arrays.

8Fault repair flowchart covers fan on / no ultrasonic, rectifier bridge check, transducer insulation check.

Especificações técnicas

Especificações da variante: SED-1.5CSQ-C

Especificações

Modelo

SED-1.5CSQ-C

Tensão

AC mains (well-grounded; not specified, typically 220V)

Utilidades

Power: AC mains (typically 220V), well-grounded; max input current governed by transducer head count (0.15 A/head; 0.12 A/head for large arrays)

Detalhes de conformidade

Operates from properly-grounded AC mains. Protections: over-current, over-temperature, output short-circuit. Generator protective earth must be properly grounded.

Dimensões

Área de instalação

Allow ≥300 mm clearance behind chassis for fan exhaust

Características principais

Digital-pulse drive — vs traditional self-oscillating: compact, light, high power, stable

Built-in frequency tracking — keeps transducer at resonant peak throughout cycle

Frequency coverage: 20 / 25 / 28 / 40 / 80 / 120 / 200 kHz selectable

Output power continuously adjustable 0–100% via potentiometer

Timer 0–999 (999 = continuous mode); ENTER saves and starts timed cycle

FUNC key cycles between frequency and time display

Current sizing: 0.15 A/head (small arrays), 0.12 A/head (large arrays)

Protections: over-current, over-temperature, output short-circuit

Rear ventilation fan; ≥300 mm clearance required behind chassis

Power stage: transistor (IGBT or MOSFET); rectifier: bridge rectifier

Modern digital-pulse drive — compact, lightweight, high power, stable vs self-oscillating

Frequency tracking maximizes transducer cavitation efficiency

Wide 20–200 kHz coverage in one platform

Robust short-circuit / over-current / over-temperature protection

Aplicações

Driving ultrasonic transducers in industrial cleaning baths

Pharmaceutical and lab glassware ultrasonic cleaning

Replacement for older self-excited generators

Multi-head ultrasonic systems (sized at 0.12–0.15 A/head)

Setores

Pharmaceutical manufacturing (vial / glassware cleaning)

Electronics / semiconductor parts cleaning

Metal parts manufacturing

Laboratory and research

Marcas dos componentes

Power stage: transistor (likely IGBT or MOSFET)

Rectifier: bridge rectifier

SED

Fale com SED Sales Team

Especialistas em equipamentos · contato pelo WhatsApp

Consulte o horário e a disponibilidade da equipe

+86 139 5885 3738

Enviar e-mail Conversar no WhatsApp →Solicitar chamada de 30 minutos →

Limpeza e manutenção

Place in dry, ventilated location with ≥300 mm clearance behind chassis for fan exhaust. Do not exceed rated maximum output current — will damage generator. Do not open chassis; contact qualified service personnel for faults. Protective earth must be properly grounded.

Documentação

Ficha técnica (PDF)

Visão geral do equipamento, especificações e dimensões · Documento original (inglês)

Solicitar à equipe de vendas

Manual do operador

Instalação, operação e diagnóstico · Documento original (inglês)

Solicitar à equipe de vendas

Folha comparativa (Padrão e Econômica)

Comparação das configurações · Documento original (inglês)

Solicitar à equipe de vendas

Protocolos IQ / OQ / PQ

Documentação de validação para conformidade GMP · Documento original (inglês)

Solicitar à equipe de vendas

Protocolos FAT / SAT

Testes de aceitação na fábrica e no local · Documento original (inglês)

Solicitar à equipe de vendas

Desenhos CAD (STEP / IGES / DWG)

Desenhos de engenharia para a instalação · Documento original (inglês)

Solicitar à equipe de vendas

Certificados de calibração

Nível sonoro, resistência de terra, rigidez dielétrica e rugosidade · Documento original (inglês)

Solicitar à equipe de vendas

DQ (qualificação do projeto)

Protocolo completo de qualificação do projeto · Documento original (inglês)

Solicitar à equipe de vendas

Certificados de materiais

Composição do aço inoxidável 316L · Documento original (inglês)

Solicitar à equipe de vendas