Accueil / Équipements / Pistolet à air chaud et accessoires de scellage / Industrial Hot Air Blower / Heat Gun

SED-RFQ-A

Sur devis

SED · SED-RFQ-A · 10 unités vendues

SED-RFQ-A — Industrial Hot Air Blower / Heat Gun

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-RFQ-A is a 3 kW industrial hot air blower / heat gun designed to be installed inside machines, equipment and instruments and operated continuously. It outputs up to 32 m³/h air at up to 650 °C through a Phi 48 mm gun

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Compressed/forced air enters the inlet, passes over an electric heater coil controlled by a temperature controller and SCR module, and exits the gun barrel as hot air at the set temperature. The operator (or PLC) sets temperature via the knob; the display shows actual vs set temperature. Pressing the standby switch keeps the last temperature/airflow settings. After operation the unit auto-cools — heating stops, fan continues until barrel temperature drops to 40 °C, then the gun goes to standby.

Processus de fonctionnement

1Compressed/forced air enters the inlet, passes over an electric heater coil controlled by a temperature controller and SCR module, and exits the gun barrel as hot air at the set temperature.

2The operator (or PLC) sets temperature via the knob; the display shows actual vs set temperature.

3Pressing the standby switch keeps the last temperature/airflow settings.

4After operation the unit auto-cools — heating stops, fan continues until barrel temperature drops to 40 °C, then the gun goes to standby.

Caractéristiques techniques

Caractéristiques de la variante : SED-RFQ-A standard 3 kW hot air gun (covered here)

Caractéristiques

Modèle

SED-RFQ-A

Tension

AC 220V 50/60Hz

Fluides et énergie

AC 220V 50/60 Hz 3 kW; reliable protective ground (3 m × 1.5 mm² plug cable provided). Continuous air supply ensuring inlet airflow ≥ minimum spec value; max ambient temperature 65 °C.

Détails de conformité

CE certified; protection class I (with protective ground). For indoor industrial use; not for use in flammable or explosive atmospheres. Must always be used with the air supply connected.

Puissance

3 kW

Pression d’air

max 700 Pa (positive air pressure delivered)

Dimensions

Longueur

321 mm

Largeur

85 mm

Hauteur

220 mm

Poids

2.9 kg

Emprise au sol

321 × 85 × 220 mm; mountable via screws on the bottom. Air outlet must not point vertically downward, must not blow into another hot-air gun nozzle; no backflow of hot expansion air; inlet draws cold air <65 °C.

Fonctionnement

Air Flow

32 m3/h m³/h

Air Pressure

800 Pa Pa

Max Ambient Temp

65 degC °C

Max Discharge Temperature

650 degC °C

Niveau sonore

<53 dB dB

Caractéristiques physiques

Nozzle Diameter

48mm mm

Caractéristiques principales

3 kW industrial hot air blower for continuous OEM integration

Maximum hot-air temperature 650 °C

Air volume 32 m³/h; maximum positive pressure 700 Pa

Phi 48 mm gun barrel; multiple nozzle/reflector options

Actual + set temperature digital display

Standby switch retains last temperature/air-volume setting

Auto-cooling shutdown — fan runs until barrel ≤40 °C then standby

Optional PLC port for remote control

Protection class I; 3 m × 1.5 mm² plug cable

CE certified

Compact 321 × 85 × 220 mm; 2.9 kg

Low noise <53 dB

Detachable handle for fixed installation

Maximum ambient temperature 65 °C

Industrial-grade hot air blower for continuous OEM integration (not just a hand tool)

High temperature (up to 650 °C) with precise digital control

Auto-cooling protects heater and prolongs service life

Optional PLC port allows full automation integration

Compact body fits inside packaging machines, tunnels and conveyors

CE certified — export-ready

Wide application range: shrink wrapping, soldering, drying, sterilising, etc.

Applications

Heat-shrink film packaging (PVC/POF heat-shrink labels and over-wraps)

Drying of pharmaceutical and food packaging

Hot-melt adhesive activation and lamination

Sterilisation of bottles, corks and cans

Surface glossing of tablets, cosmetics, chocolate

Cutting and edge-fusing of chemical fibre fabrics

Soldering and de-soldering ICs / SMT components

Plastic / thermoplastic welding

Accelerating chemical reactions and removing bubbles in mixing

Removing sulphur residue and cleaning plastic mould surfaces

Secteurs

Pharmaceutical packaging

Agroalimentaire et boissons

Cosmétiques

Electronics / SMT assembly

Plastics processing

Daily chemical / personal care

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

Nettoyage et entretien

In dusty environments install a stainless-steel filter on the air inlet (especially in metal-fragment or humid environments) to avoid internal short circuits. Disconnect all power before disassembly. Replace nozzle only after the gun has fully cooled. Avoid vibration or impact. Do not immerse in water or expose to rain/moisture.