Accueil / Équipements / Sécheur sous vide à plateaux carrés (FZG / FZG1 / FZG2) / SED-8FZG-H Static Vacuum Dryer (Reach GMP Certification)
SED-8FZG-H
Sur devis
SED-8FZG-H
SED · SED-8FZG-H · En vedette
SED-8FZG-H — SED-8FZG-H Static Vacuum Dryer
La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English
SED-8FZG-H Static Vacuum Dryer (Reach GMP Certification). Batch static-tray vacuum dryer with arch top to prevent condensate dripping back, 8-layer baking shelf with 32 trays (460×640×45mm) and 80 kg drying capacity per
Choisir une variante (3)
Délai de livraison
Sur devis
Cadence
80 kg/batch
Fonctionnement
Material is heated under vacuum while a water-ring vacuum pump (SKA-5111, 5.5 kW) removes air and humidity. Under vacuum, the boiling point of material solutions is reduced, which increases the heat-transfer driving force of the evaporator. Arch top guides condensate away from the trays and to the sides of the chamber. Vacuum pump and electromagnetic check valve (DDC-JQ50) open/close synchronously based on chamber vacuum gauge to prevent water back-flow into the chamber when the pump stops. Optional condenser recovers solvent.
Processus de fonctionnement
1Material is heated under vacuum while a water-ring vacuum pump (SKA-5111, 5.5 kW) removes air and humidity.
2Under vacuum, the boiling point of material solutions is reduced, which increases the heat-transfer driving force of the evaporator.
3Arch top guides condensate away from the trays and to the sides of the chamber.
4Vacuum pump and electromagnetic check valve (DDC-JQ50) open/close synchronously based on chamber vacuum gauge to prevent water back-flow into the chamber when the pump stops.
5Optional condenser recovers solvent.
Caractéristiques techniques
Caractéristiques de la variante : SED-5FZG-H (5-layer
Caractéristiques
Modèle
SED-8FZG-H
Cadence
80 kg/batch
Tension
380V 50Hz 3Φ
Puissance
5.5 kW
Pression d’air
vacuum (water-ring pump); shelf pipe ≤0.784 MPa
Dimensions
Longueur
1924 mm
Largeur
1513 mm
Hauteur
2060 mm
Poids
2100 kg
Matériaux
Matériaux en contact
SUS 304 (inner box 6mm mirror panel, drying rack tubes φ45/φ32/φ22mm, electric control panel, steam trap, vacuum pumping port DN65, breaking vacuum port DN32, vacuum breaker DN25); Edible silicone rubber (door seal)
Matériaux du bâti
SUS 304 1.2mm (outer seal plate); A3 8# steel (external strengthening frame); Aluminum silicate fiber cotton (insulation layer)
Caractéristiques principales
Arch-top chamber design prevents condensate dripping onto trays
Static vacuum operation preserves material shape (no damage)
Batch operation — process conditions adjustable any time
Suitable for heat-sensitive and easily oxidized materials
Heat source options: low-pressure steam, waste steam, electric heating tube, hot water, or thermal oil
GMP-compliant: pre-drying disinfection, no impurity ingress
9-layer steam coil arrangement for uniform heat distribution (top extra coil avoids upper/lower temperature non-uniformity)
Independent electric control box with PID temperature control (Yatai XMTD-3000), vacuum auto-control, over-temp alarm
Synchronous vacuum pump + electromagnetic check valve closure prevents water back-flow
Operation temperature ≤150°C; shelf-pipe permitted pressure ≤0.784 MPa
Drying capacity 80 kg/batch; 32 trays (640×460×45mm)
2 viewing mirrors (100mm diameter) on door; electric-contact vacuum gauge and PT100 thermal resistor on top
Reach GMP certification
Solvent recovery via optional condenser
Mirror-finish SUS 304 chamber (6mm inner wall, 1.2mm outer seal plate)
PID-controlled, anti-interference Yatai XMTD-3000 temperature instrument
Pull-out drying rack for easy chamber cleaning
Applications
Drying heat-sensitive APIs and pharmaceutical intermediates
Drying easily oxidized materials
Low-temperature drying with solvent recovery
Drying chemical, food, and electronic materials
GMP-validated batch drying
Secteurs
Pharmaceutique
Chemical
Food
Electronics
Marques des composants
Inner/outer chamber — SUS 304
8# steel external strengthening
Edible silicone rubber door seal
Richeng
Temperature controller XMTD-3000
Yatai
Low-voltage electrical apparatus
Huadong
Vacuum meter Y-100
Water-ring vacuum pump SKA-5111 5.5kW
Electromagnetic vacuum check valve DDC-JQ50
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe
Conformité
GMP certification
Documentation
Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial