Accueil / Équipements / Granulateur à sec de capacité moyenne (série GZ, 60–220 kg/h) / Granulateur à sec

SED-80GZ-H

Sur devis

SED-80GZ-H

SED · SED-80GZ-H · En vedette

SED-80GZ-H — Granulateur à sec

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-80GZ-H Dry Granulator. Mid-size unit producing 30–80 kg/h of uniform granules without water or wetting agents. Features 200×100 mm compaction rolls with 10×2 T maximum pressure, 25 MPa hydraulic system, electromagnet

Choisir une variante (5)

Délai de livraison

Sur devis

Cadence

30–80 kg/h

Fonctionnement

Powder is fed by a downward feeder into two counter-rotating compaction rolls driven by a hydraulic press (oil cylinder). Crystal water in the material acts as the natural binder. The compacted ribbon is broken by the granulating motor through a sieve to produce dense, uniform granules. Roll cooling-water circulation prevents sticky-roll; sealed operation meets pharmaceutical hygiene requirements.

Processus de fonctionnement

1Powder is fed by a downward feeder into two counter-rotating compaction rolls driven by a hydraulic press (oil cylinder).

2Crystal water in the material acts as the natural binder.

3The compacted ribbon is broken by the granulating motor through a sieve to produce dense, uniform granules.

4Roll cooling-water circulation prevents sticky-roll; sealed operation meets pharmaceutical hygiene requirements.

Caractéristiques techniques

Caractéristiques de la variante : SED-10GZ-H (2–10 kg/h)

Caractéristiques

Modèle

SED-80GZ-H

Cadence

30–80 kg/h

Tension

380V 50Hz 3Φ

Fluides et énergie

Power: 380V 50Hz 3-phase, 13 kW total. Cooling water: tap water, 20–45 °C supply, circulated to roll cooling system.

Puissance

13 kW

Matériaux

Matériaux en contact

SS304 (frame); 0Cr26Ni2Mo5 (rolls)

Matériaux du bâti

Stainless steel 304 frame; 2Cr13Y conditioning-treated roll shaft; ZG45# gears and guides

Caractéristiques principales

Dry granulation: no water/ethanol/wetting agent and no secondary heating-drying needed

Roll size 200×100 mm, max pressure 10×2 T

Roll speed 2–20 rpm, feed speed 6–60 rpm (both adjustable)

Roll drive motor 7.5 kW, feed motor 2.2 kW, granule motor 2.2 kW, oil pump 1.1 kW

Max hydraulic working pressure 25 MPa

Electromagnetic / variable-frequency speed control

Roll cooling-water circulation prevents sticky-roll (20–45 °C)

SS304 frame; sealed operation

Uniform density and good disintegration of finished granules

Fewer process steps, higher efficiency, lower cost vs. wet granulation

Suitable for materials that cannot be wet-granulated

Anti-blast motor available for dusty environments

Advanced electro-hydraulic operation — simple, reliable, highly automated

Applications

Pellet granules and capsule-filling granules

Food manufacturing particles and seasoning particles

Catalysts, pigments, detergents and other chemical particles

Secteurs

Pharmaceutique

Food

Plastic

Chemical

Marques des composants

Electrical appliances

Delixi

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

After each production run, clear all powder from the contact surfaces. The inter-space between the scraper board and the press roll is 0.1 mm — use no metal tools to clean. Disassemble funnel by unscrewing retaining bolts if tube is jammed. Clean and replace oil and grease at lubrication points every six months; full overhaul every three years.