Accueil / Équipements / Scelleuse d’emballages thermoformés / High-Speed Positive/Negative Pressure Thermoforming Machine — Servo Edition (SED-780-700XSJ-A)

SED-780-700XSJ-A

Sur devis

SED-780-700XSJ-A

SED · SED-780-700XSJ-A · En vedette

SED-780-700XSJ-A — Servo Edition

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-780-700XSJ-A High-Speed Positive/Negative Pressure Thermoforming Machine (Servo Edition) is a fully servo-driven blister thermoforming machine with a 780×700 mm forming area (template area 780×500 mm), 150 mm max for

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Plastic sheet (PP/PET/PVC/etc.) is fed by a 7.5 kW servo into a patented sealed energy-saving heating oven and brought to forming temperature. At the forming station, vacuum and/or compressed air drive the sheet into an aluminum-alloy mold using positive, negative, or combined pressure (selectable). The formed strip indexes to the punching station for shift-die trimming (±0.4 mm tolerance), then a full-servo manipulator (3 kW + 0.8 kW) picks finished cavities and stacks them on the conveyor. PLC drives 4× 7.5 kW servo clamping motors with bidirectional independent template motion. Safety light curtains protect the clamping area; oil-level alarms guard lubrication; broken-sheet sensors prevent fire.

Processus de fonctionnement

1Plastic sheet (PP/PET/PVC/etc.) is fed by a 7.5 kW servo into a patented sealed energy-saving heating oven and brought to forming temperature.

2At the forming station, vacuum and/or compressed air drive the sheet into an aluminum-alloy mold using positive, negative, or combined pressure (selectable).

3The formed strip indexes to the punching station for shift-die trimming (±0.4 mm tolerance), then a full-servo manipulator (3 kW + 0.8 kW) picks finished cavities and stacks them on the conveyor.

4PLC drives 4× 7.5 kW servo clamping motors with bidirectional independent template motion.

5Safety light curtains protect the clamping area; oil-level alarms guard lubrication; broken-sheet sensors prevent fire.

Caractéristiques techniques

Caractéristiques de la variante : SED-780-700XSJ-A

Caractéristiques

Modèle

SED-780-700XSJ-A

Tension

380V 50Hz 3Φ

Fluides et énergie

380V 50/60Hz 3-phase power, 125 kW total; compressed air 0.6–0.8 MPa, consumption 0.2–0.5 m³/min; 100 L vacuum pump; 5 HP air-cooled chiller

Puissance

125 kW

Pression d’air

0.6-0.8 MPa, 0.2-0.5 m³/min consumption

Dimensions

Longueur

12000 mm

Largeur

1800 mm

Hauteur

2800 mm

Poids

17000 kg

Emprise au sol

12,000 mm × 1,800 mm floor area; height 2,800 mm; total weight 17 t

Matériaux

Matériaux en contact

Aluminum-alloy blister molds; forged, heat-treated, and nitrided chain-track guide rails; 300-steel and alloy-steel pillars in clamp frame

Matériaux du bâti

Welded steel frame using 120×60×5 mm and 120×60×3 mm square tubing

Caractéristiques principales

Fully servo-driven (forming, sheet feed, manipulator)

Three forming modes: positive+negative, vacuum-only, pressure-only

Three work stations: forming, punching, manipulator

780×700 mm forming area with 150 mm max depth

Speed up to 35 molds/min (manipulator up to 40 molds/min)

Patented sealed energy-saving heating oven with auto-retract on power loss

Bidirectional independent template motion

±0.4 mm punching tolerance

Auto sheet feed with photoelectric detection and storage

Safety light curtains on left and right clamping area

Auto lubrication with low-oil-point alarms

Sheet-sag-in-oven alarm to prevent ignition

Fault diagnostics with point-of-failure alarms

Mold profile storage, output count alarms

Servo edition — higher precision and faster than belt-driven thermoformers

Wide material compatibility (10+ plastics: PP, PS, ABS, PET, PVC, PETG, APET, HIPS, EPS)

Patented sealed heating oven reduces energy consumption

Modular three-station design covers forming-punching-stacking on one platform

Premium electronics: Delta/Inovance servo + PLC, OMRON/Schneider relays, SMC/Airtac pneumatics, THK linear rails

Applications

Blister packaging thermoforming

Pharmaceutical, food, and electronics tray and clamshell production

Large-format vacuum/pressure forming up to 700 mm length

Secteurs

Pharmaceutical packaging

Food packaging

Electronics packaging

Cosmetics packaging

Marques des composants

Servo motors/drives (clamping + sheet feed)

Delta / Inovance

Reducer

Guomao (sheet-feed reducer: Taiwan)

PLC

Delta / Inovance

Touch screen (10.4")

Taiwan

Temperature controller

Taiwan

Solid-state relay

Italian / Xizi

Relay

OMRON / Schneider

Pneumatic valves and cylinders

SMC / Airtac

Electrical components

Schneider / CHINT

Bearings

Harbin (HRB)

Linear rail

THK

Photoelectric switch

Autonics

Geared motors

Jiangsu Jiangyan

Servo manipulator

Self-built (3 kW + 0.8 kW servos)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →