Accueil / Équipements / Presse rotative à comprimés — très grande (25–35 stations) / Three-Layer Rotary Tablet Press 25-Punch (SED-780-25Y1-D)

SED-780-25Y1-D

Sur devis

SED-780-25Y1-D

SED · SED-780-25Y1-D · En vedette

SED-780-25Y1-D — Three-Layer Rotary Tablet Press 25-Punch

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-780-25Y1-D Rotary Tablet Press is a fully automatic single/double/three-layer IPT-die rotary tablet press with 25 punches arranged on a 640 mm working-diameter turret. Designed for pharmaceutical, food, chemical, and

GMP-compliant construction

Choisir une variante (2)

Délai de livraison

Sur devis

Cadence

500 tablets/hour

Fonctionnement

Granular material is force-fed into the dies; the rotating turret carries 25 sets of IPT punches through fill, pre-compression (max 100 kN), main compression (max 200 kN), and ejection. Pressure sensors continuously monitor compression force; PLC + microcomputer adjust dosing, reject out-of-spec tablets, and regulate weight. Three-layer mode uses sequential filling stations on the same turret to stack distinct granule layers before final compression. Sealed transmission lubricated by Versa III system; SIEMENS PLC + touch-screen control.

Processus de fonctionnement

1Granular material is force-fed into the dies; the rotating turret carries 25 sets of IPT punches through fill, pre-compression (max 100 kN), main compression (max 200 kN), and ejection.

2Pressure sensors continuously monitor compression force; PLC + microcomputer adjust dosing, reject out-of-spec tablets, and regulate weight.

3Three-layer mode uses sequential filling stations on the same turret to stack distinct granule layers before final compression.

4Sealed transmission lubricated by Versa III system; SIEMENS PLC + touch-screen control.

Caractéristiques techniques

Caractéristiques de la variante : SED-780-23Y1-D (23 punches

Caractéristiques

Modèle

SED-780-25Y1-D

Cadence

500 tablets/hour

Tension

380V 50Hz 3Φ

Fluides et énergie

380V 50Hz 3-phase power, 15 kW main motor

Puissance

15 kW

Dimensions

Longueur

1500 mm

Largeur

1800 mm

Hauteur

2140 mm

Poids

4100 kg

Emprise au sol

1500 mm × 1800 mm floor space; height 2000 mm (without hopper) / 2140 mm (with hopper)

Matériaux

Matériaux en contact

316 stainless steel (force feeder, hopper); GCr15 bearing-steel press wheels and guides; QT600-3 turret; ZQSn10-1 tin-bronze copper wheel

Matériaux du bâti

Steel frame with stainless-steel cladding and 316SS contact parts

Caractéristiques principales

Fully automatic IPT rotary tablet press

Single / double / three-layer tablet capability

25 punches at max 200 kN; max tablet diameter 40 mm

Production capacity up to 30,000 tablets/hour

Simultaneous upper-and-lower compression for low-crack uniform tablets

Forced feeding mechanism with microcomputer control

Automatic pressure adjustment, weight control, and waste-tablet rejection

SIEMENS PLC + touch-screen control with pressure-sensor monitoring

Stainless-steel hopper and force feeder, GMP-compliant

Three-layer tablet capability — combination products on a single machine

200 kN compression — handles hard or dense formulations

25 punches for higher throughput on smaller-diameter tablets vs 23Y1-D

Premium components: SIEMENS PLC, OMRON drives, ABB motor, Schneider breakers

Applications

Single, double, and three-layer pharmaceutical tablets

Round, shaped, cartoon, and engraved tablets (max diameter 40 mm)

Granular-material compression with less than 10% sub-100-mesh fines

Secteurs

Pharmaceutique

Food

Chemical

Electronics

Marques des composants

Press wheel

Self-made (GCr15)

Pre-press wheel shaft

Self-made (GCr15)

Upper guide parts

Self-made (GCr15)

Turret

Self-made (QT600-3)

Force feeder (316SS)

Self-made

Hopper (316SS)

Self-made

Copper wheel (ZQSn10-1)

Self-made

Lubrication system

Versa III

Touch screen

SIEMENS

PLC

SIEMENS

Main inverter

OMRON

Feeder inverter

OMRON

Power button

OMRON

Circuit breaker

Schneider

Contactor

Schneider

Relay

OMRON

Motor

ABB

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP-compliant construction

Nettoyage et entretien

Pre-production: clear all residues from dies, turret, force feeder, hopper, and compression area; wipe contact surfaces with dry cloth. Post-shift: power off, disassemble dies and guides, clean all stainless-steel surfaces; apply food-grade lubricant to guide rails per maintenance schedule. Versa III lubrication system — check oil level and replenish as needed. Do not spray water on electrical components.