Accueil / Équipements / Petit générateur de vapeur (<100 kg/h, électrique sans agrément) / Electric Steam Generator (SED-68ZQ-T)

SED-68ZQ-T

Sur devis

SED-68ZQ-T

SED · SED-68ZQ-T · En vedette

SED-68ZQ-T — Electric Steam Generator

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-68ZQ-T 48 kW Electric Steam Generator. Compact vertical electric boiler producing 68 kg/h saturated steam at 0.7 MPa / 171°C, 41,280 kcal/h heat output. Water volume <30 L (boiler-license-exempt under Chinese regulat

Délai de livraison

Sur devis

Cadence

68 kg steam/h

Fonctionnement

A float-controlled water tank feeds water via a 550 W pump (Aolong brand) into the boiler vessel. Two groups of 24 kW 316L stainless steel thick-wall electric heating tubes heat and evaporate the water; tubes are insulated with imported high-temperature magnesium oxide powder (rated to 900°C). An internal steam-water separator removes water droplets before steam is delivered as dry saturated steam. The LCD controller monitors water level, pressure, and heating status in real time. A safety valve (DN20) automatically releases excess pressure; an extreme low-water-level interlock cuts power to prevent dry firing. A leakage protector and AC contactor (Delixi series 6) provide multi-layer safety interlocks.

Processus de fonctionnement

1A float-controlled water tank feeds water via a 550 W pump (Aolong brand) into the boiler vessel.

2Two groups of 24 kW 316L stainless steel thick-wall electric heating tubes heat and evaporate the water; tubes are insulated with imported high-temperature magnesium oxide powder (rated to 900°C).

3An internal steam-water separator removes water droplets before steam is delivered as dry saturated steam.

4The LCD controller monitors water level, pressure, and heating status in real time.

5A safety valve (DN20) automatically releases excess pressure; an extreme low-water-level interlock cuts power to prevent dry firing.

6A leakage protector and AC contactor (Delixi series 6) provide multi-layer safety interlocks.

Caractéristiques techniques

Caractéristiques de la variante : SED-68ZQ-T

Caractéristiques

Modèle

SED-68ZQ-T

Cadence

68 kg steam/h

Tension

380V 50Hz 3Φ

Fluides et énergie

380 V / 50 Hz / 3-phase power supply; single-machine cable ≥25 mm²; water inlet DN15; steam outlet DN20; drain DN25.

Puissance

48 kW

Dimensions

Longueur

1230 mm

Largeur

600 mm

Hauteur

1580 mm

Emprise au sol

Overall dimensions 1230 × 600 × 1580 mm (L × W × H).

Matériaux

Matériaux en contact

316L thick-wall stainless steel heating tubes; stainless steel water tank

Matériaux du bâti

Powder-coated steel exterior (CNC-cut, CNC-folded one-shot forming, high-temperature plastic spray)

Caractéristiques principales

Boiler-license-exempt design (water volume <30 L per Chinese regulation)

48 kW heating power, 68 kg/h saturated steam output, 0.7 MPa, 171°C

Two-group 316L thick-wall stainless steel heating tubes (24 kW each)

Imported high-temperature magnesium oxide insulation (≤900°C)

Built-in steam-water separator (no carryover)

Computer-welded LCD fully-automatic intelligent control system

Real-time monitoring: heating, water level, steam pressure, pump, faults

Four-period scheduled timing control

Multi-interlock safety: safety valve, pressure controller, low-water cutoff, leakage protection

X-ray inspection room + hydrostatic test before factory dispatch

Plug-and-play installation (connect power and water, press start)

≥98% thermal efficiency

License-exempt — no boiler operating permit required

Computer-welded electronic control more reliable than hand-soldered

316L thick-wall heating tubes with imported MgO — long service life

Multi-stage safety: safety valve, pressure switch, low-water cutoff, leakage breaker

Plug-and-play, no complex installation

12-month warranty + lifetime maintenance

98%+ thermal efficiency (energy saving)

Built-in steam-water separator delivers dry steam

Applications

Process steam supply for sterilization

Pharmaceutical production steam (small-batch)

Food and beverage processing steam

Laundry, dry cleaning, garment finishing

Chemical and lab steam supply

Secteurs

Pharmaceutique

Agroalimentaire et boissons

Chemical and lab

Cleaning and laundry

Marques des composants

Leakage protector/AC contactor: Delixi series 6 (China)

Heating tubes: 316L stainless steel with imported MgO (China)

Boiler feed pump (550 W): Aolong (China)

Safety valve (DN20): Guangyi (China)

Steam valve (DN20)/Drain valve (DN25)/Check valve (DN15): Yongdexin (China)

Pressure controller (LP10): Magic (China)

Pressure gauge (Y60,1.6 MPa,axial stainless): Zhengbao (China)

LCD controller: Standard configuration (China)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →