Accueil / Équipements / Déblistéreuse / Semi-Automatic De-Blister Machine (Blister Board Ejector)

SED-60TP-H

Sur devis

SED · SED-60TP-H · 1 unités vendues

SED-60TP-H — Semi-Automatic De-Blister Machine

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-60TP-H Semi-Automatic De-Blister Machine. Bench-top patented de-blistering unit that extrudes capsules, tablets and softgels out of aluminum-plastic, alu-alu and double-aluminum blister boards at up to 60 boards/min.

Délai de livraison

Sur devis

Cadence

60 pièces/min

Fonctionnement

Operator manually feeds the blister board into the inlet (widthways or lengthways). Two motorised blade wheels drive the board between them; the wheel pitch is set to ride between adjacent pill cavities so the wheels press only on the foil flange. As the board passes through, the wheels deform the cavity dome and pop the tablet/capsule out through the bottom-side foil into the discharge tray. The board exits cleanly. Adjustable blade-wheel spacing and guide-rail position allow the same machine to handle different tablet pitches and APB sizes.

Processus de fonctionnement

1Operator manually feeds the blister board into the inlet (widthways or lengthways).

2Two motorised blade wheels drive the board between them; the wheel pitch is set to ride between adjacent pill cavities so the wheels press only on the foil flange.

3As the board passes through, the wheels deform the cavity dome and pop the tablet/capsule out through the bottom-side foil into the discharge tray.

4The board exits cleanly.

5Adjustable blade-wheel spacing and guide-rail position allow the same machine to handle different tablet pitches and APB sizes.

Caractéristiques techniques

Caractéristiques de la variante : SED-60TP-H

Caractéristiques

Modèle

SED-60TP-H

Cadence

60 pièces/min

Tension

220-230V 50Hz monophasé

Fluides et énergie

220–230 V 50 Hz single-phase electrical supply, 50 W (standard outlet).

Détails de conformité

CE certified; widely exported to Europe and the US.

Puissance

0.05 kW

Dimensions

Longueur

180 mm

Largeur

270 mm

Hauteur

360 mm

Poids

12 kg

Emprise au sol

Bench-top footprint 180 × 270 mm, height 360 mm. No compressed air or water required.

Caractéristiques principales

Semi-automatic, manual feed (widthways or lengthways)

Speed up to 60 boards/min

Suits 00#, 0#, 1#, 2#, 3#, 4#, 5#, A, B hard capsules, soft capsules and all tablets

Suits aluminum-plastic (alu-PVC), alu-alu and hard double-aluminum blister boards in any in-line layout

Max APB width 120 mm

Adjustable blade-wheel pitch and guide-rail position

Choice of widthways or lengthways feed (lengthways recommended for safety)

Compact bench-top: 180 × 270 × 360 mm, 12 kg

220–230 V single-phase, 50 W

Precision-fit parts — does not crush pills, removes them cleanly with no remnants

Patented design with precision-machined parts — does not crush capsules or tablets; removes pills cleanly with no remnants

CE certified, widely exported to Europe and the US

Long service life via precision-fit moving parts and motor heat dissipation design

User-friendly: changeover for new blister type takes minutes (Allen-wrench blade-wheel adjustment)

Easy to clean: pill-contact parts dismantle easily for wipe-down

Excellent price-performance ratio for de-blister rework and reclaim lines

Applications

Pharmaceutical de-blistering and pill reclaim

QC-rejected blister board recovery

Returned-product de-blistering

R&D / pilot blister rework

Secteurs

Pharmaceutique

Health products

Vétérinaire

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

Nettoyage et entretien

Inspect and clean the inlet and outlet channels before each shift. Pill-contact parts (blade wheels, guide rails) dismantle with an Allen wrench for wiping down. Periodically open the stainless-steel cover and lubricate the internal gear with grease. Replace polyurethane rollers when worn.