Accueil / Équipements / Mélangeur biconique (production, 200–999L) / Mélangeur biconique

SED-600SZH-B

Sur devis

SED-600SZH-B

SED · SED-600SZH-B · En vedette

SED-600SZH-B — Mélangeur biconique

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-600SZH-B Double Cone Mixer for uniform mixing of two or more dry powders or granules in pharmaceutical, chemical and food industries. Total volume 600 L, working volume 300 L; mixing time 6–10 min at 12 rpm; 3 kW mot

Délai de livraison

Sur devis

Cadence

480–2880 L per batch (working volume)

Fonctionnement

Two end-cones are mounted on a horizontal axis and rotated at 12 rpm by a 3 kW motor through a reducer. As the double-cone shell rotates, gravity and the converging/diverging geometry repeatedly fold and re-distribute the powder bed, producing uniform mixing in 6–10 min. An optional internal forced-agitation paddle further breaks coagulated material and incorporates minor-quantity additives. Material is loaded via a vacuum-suction feeding device through the top inlet and discharged through a stainless-steel butterfly valve when the cone is positioned vertically.

Processus de fonctionnement

1Two end-cones are mounted on a horizontal axis and rotated at 12 rpm by a 3 kW motor through a reducer.

2As the double-cone shell rotates, gravity and the converging/diverging geometry repeatedly fold and re-distribute the powder bed, producing uniform mixing in 6–10 min.

3An optional internal forced-agitation paddle further breaks coagulated material and incorporates minor-quantity additives.

4Material is loaded via a vacuum-suction feeding device through the top inlet and discharged through a stainless-steel butterfly valve when the cone is positioned vertically.

Caractéristiques techniques

Caractéristiques de la variante : SED-600SZH-B

Caractéristiques

Modèle

SED-600SZH-B

Cadence

480–2880 L per batch (working volume)

Tension

220V 50Hz 1Φ

Fluides et énergie

Power supply: 220V (single-phase) or 380V (three-phase) 50Hz, 3 kW motor. Operating ambient temperature: 5–40°C; relative humidity: 20–85%. No compressed air or water utilities required.

Puissance

3 kW

Dimensions

Emprise au sol

See machine external dimensions for footprint. Reserve at least 1 m clearance on all sides for maintenance access. Install on flat, level floor. Transport/storage range: −25 to 55°C (max 65°C for up to 24 h). Incline during transport must not exceed 25°.

Matériaux

Matériaux en contact

Stainless steel (mixing tank); stainless-steel butterfly discharge valve

Caractéristiques principales

Double-cone tumbling geometry — 6–10 min mixing time at 12 rpm

Mixing-uniformity CV ≤5%

Stainless-steel tank with smooth dead-corner-free interior (GMP compliant)

Stainless-steel butterfly discharge valve, easy to remove and clean

Vacuum-suction feeding device included

Optional forced-agitation mechanism for fine / cohesive / damp materials

Customer-selectable 220V or 380V supply

Total volume 600 L, working volume 300 L

Excellent for minor-additive (low-dose) mixing

GMP-compliant easy-clean construction

Applications

Dry-powder mixing

Granular material blending

Low-dose additive incorporation

Slightly damp / cohesive powder mixing (with forced agitator)

Secteurs

Pharmaceutique

Chemical

Food

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Pre-production: wipe outer surface with clean damp cloth; open machine and wipe interior with damp cloth; wipe hopper with clean cloth then with 75% industrial alcohol. Post-shift: wipe all inner and outer surfaces with clean damp cloth; wipe hopper with clean cloth then 75% industrial alcohol. After each use, remove the rotating tank and clean/brush out remaining powder, then reinstall. If out of service for an extended period, wipe down, apply anti-rust oil to machined surfaces, and cover with cloth. Operate in a clean, ventilated environment. Monthly lubrication of transmission chain and adjustment knobs with oil (0–35°C) or grease (<0°C or >35°C). Weekly cleaning and tightening of electrical cabinet terminals.