Accueil / Équipements / Centrifugeuse / Centrifugeuse

SED-600LXJ-H

Sur devis

SED-600LXJ-H

SED · SED-600LXJ-H · En vedette

SED-600LXJ-H — Centrifugeuse

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-600LXJ-H flat-base full-flip-cover top-discharge centrifuge — 316L / VFD / explosion-proof / PTFE-sealed. Drum 600mm ID × 325mm effective height, 47L volume, max charge 70kg, 1600 rpm, separation factor 860, filtrati

GB19815-2005JB/T10769.1-2007JB/T10769.2-2007GB10901-2005GB/T28695-2012JB/T9095-2008

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Slurry is charged through the side feed pipe (DN40 quick-clamp) onto the rotating drum lined with PP filter bag. Centrifugal force at 1600 rpm (separation factor 860) drives liquid through the filter bag and drum perforations to the housing inner wall, draining via the DN65 discharge port. Solid cake stays on the drum wall and can be washed in place. After deceleration via energy-recovery braking (≥100s), the worm-gear full flip cover opens for manual top discharge.

Processus de fonctionnement

1Slurry is charged through the side feed pipe (DN40 quick-clamp) onto the rotating drum lined with PP filter bag.

2Centrifugal force at 1600 rpm (separation factor 860) drives liquid through the filter bag and drum perforations to the housing inner wall, draining via the DN65 discharge port.

3Solid cake stays on the drum wall and can be washed in place.

4After deceleration via energy-recovery braking (≥100s), the worm-gear full flip cover opens for manual top discharge.

Caractéristiques techniques

Caractéristiques de la variante : SED-600LXJ-H

Caractéristiques

Modèle

SED-600LXJ-H

Tension

380V 50Hz 3Φ

Puissance

4 kW

Dimensions

Longueur

1880 mm

Largeur

1100 mm

Hauteur

1200 mm

Poids

1100 kg

Matériaux

Matériaux en contact

316L acier inoxydable; PTFE or PTFE-encapsulated seals; FKM (fluororubber) oil seals

Matériaux du bâti

316L stainless steel for housing, housing flange, flip cover, flip cover flange and drum (machined from solid billet); flat base Q235 carbon steel clad both sides with 304 SS, contact areas clad with 316L SS (3mm filtrate contact, 2mm elsewhere); bearing housing carbon steel clad with 316L; main shaft 40Cr quench-tempered; hand-crank worm gearbox in 316L; liquid-damped shock absorbers in 316L

Caractéristiques principales

Full-flip-cover with hand-cranked worm-gear box (no auxiliary power, smooth operation, self-locking at any angle)

Torsion-spring assisted small flip-cover with explosion-proof light (36V magnetic-delay, Ex dIICT6/IP66) and sight glass with wiper

Flat-base structure — operating platform serves as working surface, no foundation needed

Four-point high-viscosity liquid-damped vibration isolation

All-316L stainless drum machined from solid billet (no hoop), drum welds 100% X-ray NDT inspected and dynamic balanced

Drum flat bottom with no reinforcing hoop — eliminates hygienic dead corners, easy cleaning; flat bottom leaves enough space for hand-wiping

Independent cast-steel bearing housing — inner+outer race design, vertical lift-out for easy disassembly

Double O-ring seal (PTFE-encapsulated) at top of main shaft; static O-ring + skeleton FKM oil seal at bottom

VFD start, energy-recovery brake (≥100s), anti-static narrow V-belt drive

Food-grade lubrication grease

Surface finish: contact Ra ≤0.4, non-contact Ra ≤0.8; all transition joints smooth and radiused

Full safety interlocks: cover-open, over-vibration, motor over-temp/overload, phase-loss, phase-sequence, leakage, e-stop, grounding, cover anti-drop lock

Field explosion-proof operation box (Ex deIICT6, IP65) with speed buttons, indicators, e-stop and audio/visual alarm

Main control cabinet (IP40, carbon steel powder-coat) in control room

Connection nozzles: feed DN40, wash DN20, nitrogen D16, vent DN50, drain DN65; light/sight φ130×10

Design conditions: -10~80°C, -100~500mbar, wash liquid ≥2bar

Compliant with GB19815-2005, JB/T10769.1/2-2007, GB10901-2005, JB/T6418-2010, GB/T10894/10895-2004, GB/T28695-2012, JB/T9095-2008, JB/T10411-2004

316L wetted parts plus PTFE seals — corrosion resistance for aggressive solvents

Full-flip cover gives unmatched access for cleaning and validation

Explosion-proof rated (Ex dIIBT4 motor, Ex deIICT6 field box) for hazardous-area pharma operations

Vibration isolation ≥95% — runs stably at 1600 rpm

Filtration area 0.61 m² with no residual cake

Noise ≤75 dBA at 1m

Worm-gear cover mechanism self-locks at any angle — safe and controllable

Applications

Pharmaceutical solid-liquid separation in hazardous-area zones

Fine chemical filtration with corrosive solvents

API crystal dewatering

Filter bag-based slurry separation

Secteurs

Pharmaceutique

Fine chemical

API

Marques des composants

Main bearings

ZWZ

Anti-static V-belt

Camel/Jason

Explosion-proof lighting

Anjia

Inverter

INVT or equivalent

Low-voltage components

Chint

Vibration monitor

Wuxi Houde

Inductive position sensors

Lanbao

Field explosion-proof operation box

Xinliming

Filter bag (PP)

Suzhou Saifa

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GB19815-2005

JB/T10769.1-2007

JB/T10769.2-2007

GB10901-2005

GB/T28695-2012

JB/T9095-2008

Ex dIIBT4 (motor)

Ex deIICT6 (field box)

IP55 (motor)

IP65 (field box)