Accueil / Équipements / Centrifugeuse / Flat-Base Direct-Drive Top-Discharge Centrifuge (GMP)

SED-600LXJ-A

Sur devis

SED-600LXJ-A

SED · SED-600LXJ-A · En vedette

SED-600LXJ-A — Flat-Base Direct-Drive Top-Discharge Centrifuge

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-600LXJ-A flat-base direct-drive top-discharge centrifuge for GMP pharmaceutical use. 600 mm drum diameter, 280 mm drum height, 40 L drum volume, max charge 60 kg. Drum speed 1500 rpm, max separation factor 755. 3 kW

GMPJB/T10769.2-2007

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Slurry is fed through the side DN50 feed pipe and distributed evenly across the inner surface of the rotating drum. Centrifugal force (separation factor up to 755) drives the mother liquor through the filter cloth or perforated drum wall; filtrate exits via the bottom DN80 mother-liquor outlet. The solid cake remains in the drum for manual top discharge after the run. A damped elastic damper system (viscous liquid elastic damping, >95% vibration isolation) on the flat base absorbs imbalance. Variable-frequency start reduces electrical surge; energy-recovery braking provides controlled deceleration (≈5 min brake time). A spring-cylinder large flip-top lid with fluororubber seal allows easy access.

Processus de fonctionnement

1Slurry is fed through the side DN50 feed pipe and distributed evenly across the inner surface of the rotating drum.

2Centrifugal force (separation factor up to 755) drives the mother liquor through the filter cloth or perforated drum wall; filtrate exits via the bottom DN80 mother-liquor outlet.

3The solid cake remains in the drum for manual top discharge after the run.

4A damped elastic damper system (viscous liquid elastic damping, >95% vibration isolation) on the flat base absorbs imbalance.

5Variable-frequency start reduces electrical surge; energy-recovery braking provides controlled deceleration (≈5 min brake time).

6A spring-cylinder large flip-top lid with fluororubber seal allows easy access.

Caractéristiques techniques

Caractéristiques de la variante : PSF600 (manufacturer reference designation)

Caractéristiques

Modèle

SED-600LXJ-A

Tension

380V 50Hz 3Φ

Fluides et énergie

Power: 380 V 50 Hz 3-phase; 3 kW motor + 4 kW inverter cabinet. Nitrogen purge: φ16 quick-connect. Feed: DN50 flange PN1.0 MPa. Wash: DN20 flange PN1.0 MPa. Drain (mother liquor): DN80 flange PN1.0 MPa.

Puissance

3 kW

Dimensions

Longueur

900 mm

Largeur

900 mm

Hauteur

1050 mm

Poids

900 kg

Emprise au sol

900 mm × 900 mm base; 1050 mm height; four-point support

Matériaux

Matériaux en contact

316L stainless steel (inner shell, outer shell, lid, flat-base lining, drum-basket bottom lining, feed/wash/nitrogen pipes, drain pipe); fluororubber (FKM) lid seal; 304 SS vibration damper housings and spring-cylinder body; 304 SS motor explosion-proof cover

Matériaux du bâti

Inner shell: 6 mm 316L SS; outer shell: 3 mm 316L SS; outer-shell flange: 20 mm 316L SS; lid: 4 mm 316L SS; lid flange: 20 mm 316L SS; flat base: 30 mm Q235A carbon steel clad with 2 mm 316L SS (contact surfaces) and 2 mm 304 SS (upper exposed surfaces); drum basket bottom: cast iron clad with 1.5 mm 316L SS (both faces); control cabinet: carbon-steel powder-coated

Caractéristiques principales

Flat-base direct-drive top-discharge design

316L stainless steel for all material-contact surfaces

Drum 600 mm diameter × 280 mm height, 40 L volume, 60 kg max charge

1500 rpm, max separation factor 755

3 kW explosion-proof motor EXdIIBT4 / IP55

Variable-frequency start; energy-recovery braking (≈5 min)

Spring-cylinder large flip-top lid with fluororubber (FKM) seal

Drum welds 100% non-destructive testing inspected; dynamically balanced

No reinforcing hoop on drum — fewer hygienic dead corners, easy cleaning

Damped elastic damper system on flat base (>95% vibration isolation)

Nozzles: feed DN50, wash DN20, mother-liquor DN80, nitrogen φ16

INVT frequency inverter (4 kW) and Delixi electrical components

Wuxi Shendiao explosion-proof motor

PSF600 manufacturer reference designation

Design temperature –10 to +70 °C; design pressure 0–0.05 MPa

GMP-compliant for pharmaceutical solid-liquid separation

316L stainless steel contact surfaces with smooth/rounded weld joints

Explosion-proof construction for hazardous solvent environments

High-precision dynamic balancing for low-vibration, low-noise operation (≤85 dBA)

Comprehensive construction material spec (inner shell 6 mm 316L, outer shell 3 mm 316L, lid 4 mm 316L, flat base 30 mm Q235A clad with 2 mm 316L)

Applications

Pharmaceutical solid-liquid separation

GMP-grade dewatering of fine crystals

Hazardous solvent slurry filtration (explosion-proof)

Secteurs

Pharmaceutique

Fine chemical

Food / API

Marques des composants

Explosion-proof motor

Wuxi Shendiao

Frequency inverter

INVT

Low-voltage electrical components

Delixi

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP

JB/T10769.2-2007