Accueil / Équipements / Sécheur centrifuge à grande vitesse pilote/petite production (5–50 kg/h) / Lab Large-Scale Centrifugal Spray Dryer

SED-5PG-Q

Sur devis

SED · SED-5PG-Q · En vedette

SED-5PG-Q — Lab Large-Scale Centrifugal Spray Dryer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

Lab-scale large spray dryer, self-developed and produced. Suitable for universities, research institutes and food/pharma/chemical lab production of fine powders. Broad applicability across solutions, emulsions, and suspe

Délai de livraison

Sur devis

Cadence

4.25–5.25 L/h water evaporation

Fonctionnement

Air passes through a filter and heater, enters the hot-air distributor at the top of the drying chamber and flows uniformly into the chamber in a spiral pattern; feed liquid is sent to the centrifugal spray head at the top and atomized into fine droplets. The greatly increased contact surface causes water to evaporate rapidly, drying to product in a very short time. Coarser product is collected from the dryer bottom; exhaust is discharged by the centrifugal fan.

Processus de fonctionnement

1Air passes through a filter and heater, enters the hot-air distributor at the top of the drying chamber and flows uniformly into the chamber in a spiral pattern; feed liquid is sent to the centrifugal spray head at the top and atomized into fine droplets.

2The greatly increased contact surface causes water to evaporate rapidly, drying to product in a very short time.

3Coarser product is collected from the dryer bottom; exhaust is discharged by the centrifugal fan.

Caractéristiques techniques

Caractéristiques de la variante : SED-5PG-Q

Caractéristiques

Modèle

SED-5PG-Q

Cadence

4.25–5.25 L/h water evaporation

Tension

380V

Fluides et énergie

380V; 22 kW

Puissance

22 kW

Dimensions

Longueur

2200 mm

Largeur

1300 mm

Hauteur

2200 mm

Matériaux

Matériaux en contact

1Cr18Ni9Ti stainless steel (all wetted parts)

Matériaux du bâti

acier inoxydable

Caractéristiques principales

Drying speed is rapid — 95–98% water evaporates in an instant; drying takes about 10+ seconds

Co-current spray drying — droplet temperature stays low, preserving heat-sensitive product quality

Average drying time 1.0–1.5 s

Inlet air temperature control: 30–300°C

Outlet air temperature control: 30–140°C

Temperature control accuracy ±1°C

Maximum feed rate 5000 mL/h (adjustable); minimum feed 50 mL

Peristaltic-pump feeding

Stainless steel chamber diameter 900 mm

Machine dimensions: 2200×1300×2200 mm

Total power: 22 kW / 380V

Wide application range — polymers, dyes, pigments, ceramics, glass, herbicides, pesticides, carbohydrates, dairy/egg, tannins, slaughterhouse byproducts, blood and fish products, detergents and surfactants, fertilizers, organic and inorganic compounds

Fast drying preserves near-spherical particle shape — good dispersibility, flowability and solubility

Single-step drying for liquids with 40–60% moisture (special materials up to 90%) — usually no crushing or screening required

All wetted parts in 1Cr18Ni9Ti stainless steel

Integrated control cabinet with all indicators and start/stop devices

Designed for lab and pilot R&D

Gentle on heat-sensitive bioactives (enzymes, biologics, biopesticides) — co-current mode keeps droplet temp low

Applications

Lab-scale powder production from solutions, emulsions, suspensions

Drying of heat-sensitive bioactives (biologics, biopesticides, enzymes)

Polymers, resins, dyes, pigments, ceramics, glass, agrochemicals, food, dairy/egg, fish/blood products, surfactants, fertilizers, organic/inorganic compounds

Secteurs

Pharmaceutique

Food

Chemical

Academic / Research

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →