Accueil / Équipements / Sécheur centrifuge à grande vitesse pilote/petite production (5–50 kg/h) / High Speed Centrifugal Spray Dryer
SED-5PG-I
Sur devis
SED-5PG-I
SED · SED-5PG-I · En vedette
SED-5PG-I — High Speed Centrifugal Spray Dryer
La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English
High Speed Centrifugal Spray Dryer for liquid process forming and drying. Generates powdered, granular solid products from solutions, emulsions, suspensions and paste-like liquid raw materials. 5 kg/h water evaporation c
Délai de livraison
Sur devis
Cadence
4.25–5.25 kg/h
Fonctionnement
Air is filtered and heated, entering the air distributor at the top of the dryer; hot air spirals evenly into the drying chamber. Liquid material passes through the high-speed centrifugal atomizer at the top of the tower and is sprayed (rotating) into a very fine mist of liquid beads, which can be dried into a finished product within a very short period of time on contact with hot air. Finished product is continuously output from the bottom of the drying tower and the cyclone separator; exhaust gas is emptied by the fan.
Processus de fonctionnement
1Air is filtered and heated, entering the air distributor at the top of the dryer; hot air spirals evenly into the drying chamber.
2Liquid material passes through the high-speed centrifugal atomizer at the top of the tower and is sprayed (rotating) into a very fine mist of liquid beads, which can be dried into a finished product within a very short period of time on contact with hot air.
3Finished product is continuously output from the bottom of the drying tower and the cyclone separator; exhaust gas is emptied by the fan.
Caractéristiques techniques
Caractéristiques de la variante : SED-5PG-I
Caractéristiques
Modèle
SED-5PG-I
Cadence
4.25–5.25 kg/h
Tension
380/220V triphasé AC
Fluides et énergie
380/220V triphasé AC; electric heating 9 kW; circulating cooling water pump 18 W
Puissance
9 kW
Dimensions
Longueur
1950 mm
Largeur
1020 mm
Hauteur
2050 mm
Emprise au sol
2.1 m²; whole-machine ships pre-assembled (customer terminates power at cabinet entrance)
Matériaux
Matériaux en contact
SUS304 (cyclone separator, diameter 168 mm, 2 mm thick, polished inside and out); all stainless steel piping
Matériaux du bâti
acier inoxydable; ultra-fine glass wool insulation 80 mm
Caractéristiques principales
Water evaporation 5 kg/h
Operating temperature: inlet 100–280°C, outlet 50–120°C (adjustable)
System receiving rate ≥95%
Electric heating 9 kW with automatic inlet temperature control
Induced draft fan 1.5 kW with damper
Circulating cooling water pump 18 W
Peristaltic pump: <30 W, speed 0.1–100 RPM adjustable, flow 0.0002–380 mL/min
Cyclone separator: diameter 168 mm, SUS304 2 mm thick, polished inside and out
Air filter: diameter 400 mm
All-stainless-steel piping
Insulation: ultra-fine glass wool, 80 mm thickness
Drying speed fast — 95–98% water evaporates in an instant; drying completes in seconds
Especially suitable for heat-sensitive materials
Product has good uniformity, fluidity and solubility, high purity
Single-step drying for liquids with 40–60% moisture (special materials up to 90%)
Centralized digital operation control with auto inlet-temperature control
Whole-machine ships pre-assembled — customer only wires the cabinet
Machine footprint 2.1 m²; host form factor 1950×1020×2050 mm
Power supply: 380/220V three-phase AC; total electric heating 9 kW
Single-step drying for heat-sensitive liquids
Compact 2.1 m² footprint suitable for lab/pilot scale
Applications
Drying of solutions, emulsions, suspensions and pastes
Production of powdered or granular solid products
Drying of heat-sensitive materials
Secteurs
Pharmaceutique
Food
Chemical
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe
Documentation
Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial