Accueil / Équipements / Sécheur sous vide à plateaux carrés (FZG / FZG1 / FZG2) / Square Vacuum Drying Machine (SED-FZG series)

SED-5FZG-A

Sur devis

SED-5FZG-A

SED · SED-5FZG-A · En vedette

SED-5FZG-A — Square Vacuum Drying Machine

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-5FZG-A series square vacuum drying machine. Static cabinet dryer for heat-sensitive raw materials that decompose, polymerise or degrade at high temperature. Internal chamber 1500×1060×1220 mm. Overall dimensions 1720

GMP compliant

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Vacuum drying: the chamber is evacuated to approximately −0.099 MPa, lowering the boiling point of moisture/solvent so heat-sensitive materials evaporate at lower temperatures. Heat is conducted into the product via steam-heated shelves. Vapour is pumped out by a 4 kW vacuum pump. An optional condenser allows solvent recovery. If SK series water-ring vacuum pump is used, the condenser may be omitted, saving investment. Pre-drying steam sterilisation is possible; no impurities contact the product during drying, meeting GMP requirements.

Processus de fonctionnement

1Vacuum drying: the chamber is evacuated to approximately −0.099 MPa, lowering the boiling point of moisture/solvent so heat-sensitive materials evaporate at lower temperatures.

2Heat is conducted into the product via steam-heated shelves.

3Vapour is pumped out by a 4 kW vacuum pump.

4An optional condenser allows solvent recovery.

5If SK series water-ring vacuum pump is used, the condenser may be omitted, saving investment.

6Pre-drying steam sterilisation is possible; no impurities contact the product during drying, meeting GMP requirements.

Caractéristiques techniques

Caractéristiques de la variante : SED-5FZG-A SED-5FZG-A

Caractéristiques

Modèle

SED-5FZG-A

Fluides et énergie

Low-pressure or surplus-heat steam supply for heating; vacuum pump 4 kW power; cooling water if condenser used

Puissance

4 kW

Pression d’air

-0.099 MPa (vacuum)

Dimensions

Longueur

1720 mm

Largeur

1513 mm

Hauteur

1924 mm

Poids

2000 kg

Matériaux

Matériaux en contact

SS316L (trays); SUS304 (chamber inner wall, door, handles, heating tubes, stop valves)

Matériaux du bâti

SUS304 door 10 mm; SUS304 10+2 mm heating cabinet wall with 80 mm insulation; Carbon steel A3 mainframe 12 mm; SUS304 handles and compress handwheels

Caractéristiques principales

Internal chamber 1500×1060×1220 mm; overall 1720×1513×1924 mm

5 heated shelves; 20 trays (460×640×45 mm, SS316L)

Negative pressure −0.099 MPa

Steam-heated shelves (low-pressure or surplus heat steam)

Heat-preservation cabinet wall 80 mm thick (SUS304 10+2 mm inner wall)

Arch-roof design prevents condensate dripping onto trays

Drain valve at bottom for rapid waste water removal

Steam sterilisation port for pre-drying disinfection

Scientific heater tube layout eliminates upper/lower temperature differential

Unique door hinge design: lightweight, flexible opening, stable seal

Door handle, sight-glass seat, handwheels all in stainless steel

Safety valve and sight glass on box body for simplified, safe operation

Static dryer: shape of dried material not destroyed

Vacuum pump 4 kW (Shandong)

Lowers boiling point so heat-sensitive APIs and intermediates dry without thermal damage

GMP-compliant: no impurity contact during drying; pre-drying disinfection possible

Lower heat loss thanks to 80 mm insulated cabinet wall

SUS304 contact surfaces, SS316L trays for corrosion resistance

Solvent recovery option via external condenser

12-month warranty from commissioning; free installation and commissioning

30% TT deposit; delivery 60 days after contract

Applications

Drying of heat-sensitive raw materials

Drying of materials that decompose, polymerise or deteriorate at high temperature

Drying of materials requiring solvent recovery (with optional condenser)

Drying of toxic/irritating gas-emitting materials (sealed environment)

Secteurs

Pharmaceuticals

Chemicals

Foodstuff

Electronics

Marques des composants

Temperature gauge

W-SSI

Vacuum gauge

ZOPI

Safety valve

A27H-W

Stop valve

Casting SUS304

Vacuum pump

4 kW

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP compliant

Nettoyage et entretien

After use, clean box body and rack joints where fouling accumulates. Disconnect rack joints, wash thoroughly with water, reinstall. Regularly inspect vacuum gauge, temperature gauge and digital display; replace if damaged.