Accueil / Équipements / Presse excentrique monopoinçon — paillasse/petite / Single-Punch Tablet Press (SED-5DY3-E)

SED-5DY3-E

Sur devis

SED-5DY3-E

SED · SED-5DY3-E · En vedette

SED-5DY3-E — Single-Punch Tablet Press

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-5DY3-E single-punch tablet press. Compresses powdered or granular material into round, shaped, or annular tablets, including double-side embossed shapes (logos/text). Compared with the original TDP model, the machine

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

3600–4500 pièces/h

Fonctionnement

Single-punch (eccentric) tablet press: the feeder fills the die cavity with powder; the upper punch descends into the middle die to compress the material against the lower punch; the lower punch then rises to eject the formed tablet. Filling depth, tablet thickness, and pressing pressure are independently adjustable. A hand-swing mode allows manual operation when power is unavailable.

Processus de fonctionnement

1Single-punch (eccentric) tablet press: the feeder fills the die cavity with powder; the upper punch descends into the middle die to compress the material against the lower punch; the lower punch then rises to eject the formed tablet.

2Filling depth, tablet thickness, and pressing pressure are independently adjustable.

3A hand-swing mode allows manual operation when power is unavailable.

Caractéristiques techniques

Caractéristiques de la variante : SED-5DY3-E SED-5DY3-E

Caractéristiques

Modèle

SED-5DY3-E

Cadence

3600–4500 pièces/h

Tension

220V 50Hz

Fluides et énergie

220V 50Hz single-phase power; 0.75 kW (750 W) motor at 1,400 r/min, driven via V-belt.

Puissance

0.75 kW

Dimensions

Longueur

650 mm

Largeur

440 mm

Hauteur

650 mm

Poids

120 kg

Emprise au sol

Mount on a wood or cement workbench using three M12 bolts. Recommended bench height approximately 600 mm from floor. A ~35 mm diameter clearance hole is required in the bench opposite the lower punch position for service access.

Caractéristiques principales

Maximum pressing force 50 kN

Maximum tablet diameter 20 mm

Maximum filling depth 17–18 mm

Production capacity 3,600–4,500 tablets/h

Adjustable filling depth, tablet thickness, and pressing pressure

Capable of round, irregular, annular, and double-side embossed tablets (logos/text)

Hand-swing fallback when power is interrupted

Motor 750 W at 1,400 r/min

Single set of dies; quick-change die system

Dimensions: 650 × 440 × 650 mm; weight 120 kg

Stronger frame and motor than the legacy TDP design

Wider tablet size range than predecessor models

Suitable for both R&D and small-batch production

Manual hand-swing operation possible during power outages

Simple operation and easy maintenance

Applications

Pharmaceutical tablet pressing (powders and granules)

Catalyst tablets

Sugar, candy, calcium, and coffee tablets

Powder metallurgy

Electronic component pressing

Agricultural fertilizer tablets

Double-side embossed tablets (logos/text)

Secteurs

Pharmaceuticals

Chemicals

Food

Electronics

Hospitals and R&D institutions

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Remove residual powder and clean all machine parts after each shift. For extended idle periods: disassemble dies, clean and coat all friction surfaces with anti-rust oil, and cover with dust shield. Store dies submerged in oil. Inspect machine parts twice per month.