Accueil / Équipements / Broyeur ultrafin / Low-Temperature Ultrafine Pulverizer (Vibratory Cell-Wall-Breaking Mill)

SED-5CFS-N

Sur devis

SED-5CFS-N

SED · SED-5CFS-N · En vedette

SED-5CFS-N — Low-Temperature Ultrafine Pulverizer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-5CFS-N low-temperature ultrafine pulverizer (vibratory cell-wall-breaking mill). Vibration + grinding + shearing pulverization in a sealed 304 SS cylindrical-arc chamber with grinding rods on a high-strength spring/e

GMP-cleanroom suitable (100k–300k class)

Délai de livraison

Sur devis

Cadence

0.5–5 kg/h

Fonctionnement

Material is loaded via 2 L 304 SS feed cassettes into the sealed 304 SS arc-cylinder chamber containing grinding rods. A high-strength spring drive with eccentric mass excites high-frequency vibration; rods linearly grind, roll and shear the material until micron-scale fineness is achieved (cell-wall-breaking for pollens/spores). After the cycle the operator electrically lifts and manually flips the chamber to discharge. An optional Copeland-compressor chiller circulates R404a refrigerant through the chamber's four-side water jackets to maintain -25 °C to 0 °C grinding, preventing heat damage. The chamber is fully sealed with food-grade silicone tubing connections — no dust escape, no material loss; processing can be done under inert atmosphere for explosion / oxidation prevention.

Processus de fonctionnement

1Material is loaded via 2 L 304 SS feed cassettes into the sealed 304 SS arc-cylinder chamber containing grinding rods.

2A high-strength spring drive with eccentric mass excites high-frequency vibration; rods linearly grind, roll and shear the material until micron-scale fineness is achieved (cell-wall-breaking for pollens/spores).

3After the cycle the operator electrically lifts and manually flips the chamber to discharge.

4An optional Copeland-compressor chiller circulates R404a refrigerant through the chamber's four-side water jackets to maintain -25 °C to 0 °C grinding, preventing heat damage.

5The chamber is fully sealed with food-grade silicone tubing connections — no dust escape, no material loss; processing can be done under inert atmosphere for explosion / oxidation prevention.

Caractéristiques techniques

Caractéristiques de la variante : SED-5CFS-N

Caractéristiques

Modèle

SED-5CFS-N

Cadence

0.5–5 kg/h

Tension

380V (main host); chiller 380V/3 kW/3-phase

Puissance

1.1 kW

Dimensions

Longueur

1245 mm

Largeur

740 mm

Hauteur

1600 mm

Poids

510 kg

Matériaux

Matériaux en contact

304 stainless steel — chamber, grinding rods, feed cassettes, base; food-grade silicone tubing for chiller connection

Matériaux du bâti

304 acier inoxydable base; brushed stainless steel inner and outer skins on three-layer sound enclosure; tempered glass viewing windows

Caractéristiques principales

Vibration-grind-shear pulverization with eccentric block + high-strength spring drive

Single charge 0.5–1.5 kg per cycle; throughput 0.5–5 kg/h (material dependent)

Pulverization fineness 100–2000 mesh; cell-wall-break rate ≥95% on pollen/spores

Sealed 304 SS arc-cylinder chamber, ≥6.3 L volume

Full water-jacket on chamber (outer ring, left, right, and central shaft) for fast continuous cooling

Optional cryogenic chiller — Copeland compressor + R404a, grinds at -25 °C to 0 °C

Two 2 L 304 SS feed cassettes, electric lift + lever-lock loading

Manual flip chamber discharge with precision drive shaft

Three-layer sound-insulation enclosure (interior/exterior brushed SS + thick acoustic core); plug-in assembly

Tempered-glass viewing windows on roof and front/rear doors

Inert-atmosphere capable for explosion/oxidation-sensitive material

Suitable for dry, wet (slurry), precision blending, and coating modification operations

NSK bearings on main spindle

1.1 kW main motor, 380V; chiller 3 kW 3-phase

Main unit 1245×740×1600 mm, 510 kg; chiller 1750×640×1535 mm, 235 kg

Suitable for 100k–300k-class GMP cleanroom

Cryogenic option preserves heat-sensitive bioactives in TCM, pollen, spores

Sealed chamber — no dust, no loss, no contamination; suits expensive medicinal materials

Cell-wall-breaking ≥95% for ganoderma spore powder and similar

Easy clean and quick changeover for multi-product operations

Three-layer sound enclosure — quiet operation

Low power (1.1 kW main), low operating cost, no consumable wear parts

GMP-cleanroom suitable, 304 SS contact surfaces

Applications

Cell-wall-breaking ultrafine pulverization of TCM, pollen, spores, algae

Pulverization of tough fibrous (lingzhi, silk), spongy, oily (almond), sugary (wolfberry, mulberry, hawthorn) materials with cryogenic support

Ultrafine grinding of single or compound TCM, animal/plant/mineral, hard/brittle materials

Wet, dry, precision blending and coating-modification grinding

Secteurs

Traditional Chinese Medicine (TCM)

Pharmaceutique

Health food / Nutraceutical

Cosmetic raw materials

Marques des composants

Main spindle bearing

NSK

Cryogenic compressor

Copeland (Emerson)

Refrigerant

R404a

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP-cleanroom suitable (100k–300k class)