SED-550FQ-A
Sur devis
SED-550FQ-A
SED · SED-550FQ-A · En vedette
SED-550FQ-A — L-Bar Sealing and Cutting Machine
La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English
SED-550FQ-A automatic L-bar / side sealer for in-line shrink wrapping. Uses centre-fold film and seals the other three sides with constant-temperature heating (seals PE, POF and other standard heat-seal films). Photoelec
Choisir une variante (2)
Délai de livraison
Sur devis
Cadence
30 pièces/min
Fonctionnement
Product is conveyed by PU belt (Linbang motor) into the sealing zone; Omron photoelectric sensor detects product arrival. Centre-fold film is advanced by a Linbang film-feed motor + Omron inductive switch (controls film length) to cover the product. Airtac cylinder drives the horizontal seal blade (570 mm) vertically down; Teflon-coated alloy blade heated by stainless-steel heater tube + Xinpu temperature controller (0–400°C) heat-seals and cuts all three open sides (fourth side is the fold). Waste film is rewound by Linbang rewind motor + Omron inductive switch (timed). A multi-position perforator simultaneously punches holes to allow air escape during downstream shrinkage. Packaged products are conveyed to the downstream internal-circulation shrink tunnel (e.g. SED-5535RS-A).
Processus de fonctionnement
1Product is conveyed by PU belt (Linbang motor) into the sealing zone; Omron photoelectric sensor detects product arrival.
2Centre-fold film is advanced by a Linbang film-feed motor + Omron inductive switch (controls film length) to cover the product.
3Airtac cylinder drives the horizontal seal blade (570 mm) vertically down; Teflon-coated alloy blade heated by stainless-steel heater tube + Xinpu temperature controller (0–400°C) heat-seals and cuts all three open sides (fourth side is the fold).
4Waste film is rewound by Linbang rewind motor + Omron inductive switch (timed).
5A multi-position perforator simultaneously punches holes to allow air escape during downstream shrinkage.
6Packaged products are conveyed to the downstream internal-circulation shrink tunnel (e.g.
7SED-5535RS-A).
Caractéristiques techniques
Caractéristiques de la variante : SED-550FQ-A Side sealer (L-bar sealing and cutting machine)
Caractéristiques
Modèle
SED-550FQ-A
Cadence
30 pièces/min
Tension
220V/50Hz
Fluides et énergie
220 V/50 Hz; compressed air ≥0.5 MPa
Puissance
1.35 kW
Pression d’air
≥0.5 MPa
Dimensions
Longueur
1950 mm
Largeur
1030 mm
Hauteur
1540 mm
Poids
400 kg
Matériaux
Matériaux en contact
PU conveyor belt; stainless steel at key positions; aluminium extrusion; Teflon-coated seal blade
Matériaux du bâti
Carbon-steel painted frame; stainless steel sheet and aluminium extrusion at key positions; anti-corrosion surface painting or nickel plating
Caractéristiques principales
Automatic L-bar side-seal / cutting (centre-fold + 3-side seal)
Seals PE, POF and other standard heat-seal films
Photoelectric product auto-detection (Omron)
Auto-feed or manual-feed modes
Horizontal seal blade 570 mm (vertical: unlimited)
Max package size W+H ≤400 mm
Cutter opening ≤250 mm
Conveyor width 430 mm
Speed 0–30 packages/min
Power supply 220 V/50 Hz, ≤1.35 kW
Compressed air ≥0.5 MPa
Stainless steel heater tube (long life)
Teflon-coated anti-stick alloy seal blade
Xinpu digital temperature controller + imported thermal sensor (0–400°C)
Airtac cylinder vertical drive
Japan THK linear guides
PU conveyor belt
Multi-position perforator (air evacuation during shrinkage)
Omron seal-blade safety protection
Dimensions 1,950×1,030×1,540 mm; weight 400 kg
Firm, attractive seal — especially suited for POF film cutting
Size changeover via handwheel only — no part replacement
Adjustable-speed in-feed + rear storage platform for high-speed unmanned operation
Key structural parts in stainless steel and aluminium
Anti-corrosion surface: painted or nickel-plated
Easy operation; reduced product changeover time
Applications
In-line shrink packaging
PE film sealing and cutting
POF film sealing and cutting
Automatic 3-side sealing
Secteurs
Pharmaceutique
Daily chemical
Food
Consumer goods
Marques des composants
Seal-blade temperature control
Xinpu digital controller + imported thermal sensor
Seal-blade safety / photoelectric / inductive switch / relay
Omron
Horizontal cutter cylinder / seal cylinder
Airtac
Linear guide
THK
Conveyor / film-feed / rewind motor
Linbang
Time relay
Mingzhuo
Compteur
JiaLian
Emergency switch
Chint
Heater tube
Stainless steel
Seal blade
Anti-stick high-temp alloy + Teflon coating
Conveyor belt
PU
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe
Documentation
Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial