Accueil / Équipements / Conditionneuse blister en plastique souple / Soft Plastic Blister Packaging Machine

SED-520RSP-B

Sur devis

SED-520RSP-B

SED · SED-520RSP-B · En vedette

SED-520RSP-B — Soft Plastic Blister Packaging Machine

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-520RSP-B flat-plate soft-plastic automatic blister packing machine. Mitsubishi PLC + HMI + servo main motor; 6-10 cycles/min, up to 260 syringes/min (2 mL). 490 × 365 × 70 mm forming area; 350 × 245 mm × 2 pieces sec

Délai de livraison

Sur devis

Cadence

6–10 syringes/min (2 mL)

Fonctionnement

Lower film is pre-fed by a feed motor + swing arm + aluminium feed roller to the preheating plate (tight contact; plate separates automatically during traction). Stainless-steel backward-leaning clamp chains index the film to the forming station (cylinder clamping + sealing ring + vacuum -0.09 MPa). Product then moves to the heat-sealing station (cylinder closing; upper mold with cylinder buffer; textured surface sealing) where the upper film is heat-sealed onto the blister. Rotary-knife creasing + rodless-cylinder cross-cutting completes the pack; non-toxic PVC conveyor belt for discharge; waste film wound onto rewind reel. Drive: Mitsubishi servo motor 1.5 kW + gearbox.

Processus de fonctionnement

1Lower film is pre-fed by a feed motor + swing arm + aluminium feed roller to the preheating plate (tight contact; plate separates automatically during traction).

2Stainless-steel backward-leaning clamp chains index the film to the forming station (cylinder clamping + sealing ring + vacuum -0.09 MPa).

3Product then moves to the heat-sealing station (cylinder closing; upper mold with cylinder buffer; textured surface sealing) where the upper film is heat-sealed onto the blister.

4Rotary-knife creasing + rodless-cylinder cross-cutting completes the pack; non-toxic PVC conveyor belt for discharge; waste film wound onto rewind reel.

5Drive: Mitsubishi servo motor 1.5 kW + gearbox.

Caractéristiques techniques

Caractéristiques de la variante : SED-520RSP-B

Caractéristiques

Modèle

SED-520RSP-B

Cadence

6–10 syringes/min (2 mL)

Fluides et énergie

Compressed air >0.2 m³/min at 0.4-0.6 MPa (user-supplied); vacuum -0.09 MPa; mould cooling water 60 L/h (user-supplied)

Puissance

13.5 kW

Pression d’air

0.4-0.6 MPa

Dimensions

Longueur

6490 mm

Largeur

1260 mm

Hauteur

1621 mm

Poids

2000 kg

Matériaux

Matériaux en contact

Stainless steel (drug/needle-contact surfaces); non-toxic PVC (conveyor belt)

Matériaux du bâti

SUS304 1.2 mm stainless steel — electrical box and exterior; 45-gauge steel wall plates 16 mm; welded channel-steel base frame; aluminium forming/sealing moulds; GCr15 Φ25 guide pillars

Caractéristiques principales

Cycle rate 6-10 strokes/min

2 mL syringe output up to 260 pcs/min

Forming area 490 × 365 × 70 mm

Traction stroke 20-400 mm

Upper film 510 mm wide, lower film 525 mm wide

Forming heater 6 kW + heat-sealing heater 6 kW

Servo main motor 1.5 kW

Mark-registration accuracy <0.2 mm

Vacuum level -0.09 MPa

Mould cooling water 60 L/h

Overall weight 2000 kg

Mitsubishi temperature module supports MES data export

Banner mark-registration sensor — accurate and reliable

Backward-leaning film clamp chain conforms to EU/US standards

Cast-iron machine body — absorbs vibration, does not deform (45-gauge steel wall panels 16 mm)

Drawer-type upper mold change (no frame disassembly); pin-positioned lower mold

Applications

Disposable syringe blister packaging

Throat wipe / swab packaging

Mask packaging

Infusion set / infusion tube

Gauze

Paper-plastic blister

Plastic-plastic blister

Secteurs

Medical device

Pharmaceutique

Diagnostic consumables

Marques des composants

Screen GS2107-WTBD: Mitsubishi (Japan)

PLC FX3G-60M: Mitsubishi (Japan)

Temperature Module FX3U-4LC: Mitsubishi (Japan)

Servo Drive MR-JE-100A: Mitsubishi (Japan)

Servo Motor HG-SN102J-S100: Mitsubishi (Japan)

Contactor E3210/E1210: Schneider (France)

Relay MY4N-GS: Schneider (France)

Circuit Breaker: Schneider (France)

Solid state relay SSR-60A: AOYI (China)

Mark sensor R58: Banner (USA)

Switching power supply LRS-50-24: Mean Well (Taiwan)

Receiving photoelectric IME12-04BNSZW2K: SICK (China)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →