Accueil / Équipements / Variante RG de la série RG1 (allongée/tubes en aluminium) / Fully Automatic Tube Filling and Sealing Machine (Water-Cooled)

SED-50RG1-W

Sur devis

SED-50RG1-W

SED · SED-50RG1-W · En vedette

SED-50RG1-W — Fully Automatic Tube Filling and Sealing Machine

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

The SED-50RG1-W is a fully automatic plastic / aluminum-plastic tube filling and sealing machine with water-cooled tube-end seal jaws. Working sequence: auto tube loading → color-mark registration → filling → tube-end he

Délai de livraison

Sur devis

Cadence

30–50 tubes/h

Fonctionnement

Tubes are loaded into a magazine; an auto feeder pushes them onto a mechanical chain conveyor with cup grips. A color-mark sensor (Panasonic) and Times Chaoqun seek motor rotate each tube to the programmed angle for label/seam alignment. Mechanical cam-and-conveyor drive indexes the tube to the filling station, where a metered piston/peristaltic pump delivers product (5–300 mL range, ±1% accuracy). Tube tail then enters the heat station where a 3.3 kW heater softens the polymer; a water-cooled seal jaw closes, embossing line/knurl/shape pattern with date code. A trim knife cuts excess; finished tubes discharge. Xinjie PLC + HMI sequences all stations with VFD speed control.

Processus de fonctionnement

1Tubes are loaded into a magazine; an auto feeder pushes them onto a mechanical chain conveyor with cup grips.

2A color-mark sensor (Panasonic) and Times Chaoqun seek motor rotate each tube to the programmed angle for label/seam alignment.

3Mechanical cam-and-conveyor drive indexes the tube to the filling station, where a metered piston/peristaltic pump delivers product (5–300 mL range, ±1% accuracy).

4Tube tail then enters the heat station where a 3.3 kW heater softens the polymer; a water-cooled seal jaw closes, embossing line/knurl/shape pattern with date code.

5A trim knife cuts excess; finished tubes discharge.

6Xinjie PLC + HMI sequences all stations with VFD speed control.

Caractéristiques techniques

Caractéristiques de la variante : SED-50RG1-W

Caractéristiques

Modèle

SED-50RG1-W

Cadence

30–50 tubes/h

Tension

220V 50Hz / 380V (selectable)

Puissance

3.7 kW

Pression d’air

0.6-0.8 MPa, 30 L/min compressed air

Dimensions

Longueur

2000 mm

Largeur

1000 mm

Hauteur

1900 mm

Poids

500 kg

Matériaux

Matériaux en contact

SUS304 stainless steel (hopper, filling tank, piston/peristaltic pump wetted parts, nozzles, tube-touch parts)

Matériaux du bâti

SUS304 stainless steel (frame, table top, guarding); carbon-steel control cabinet (powder-coated)

Caractéristiques principales

Water-cooled seal jaws for stable seal temperature in long runs

Three seal patterns: line, knurl, custom shape

Auto color-mark registration (Panasonic + Times Chaoqun seek motor)

Selectable fill range: 5–75 mL / 30–200 mL / 100–300 mL

Tube envelope: 12–50 mm dia × 80–200 mm length

Capacity 30–50 tubes/min; fill accuracy ±1%

Mechanical drive + Xinjie PLC + HMI for low fault rate

All material-contact parts SUS304

Selectable 220V/50Hz or 380V power input

AirTAC-equivalent (Yicheng) pneumatics; CHINT main electrics

Footprint 2000 × 1000 × 1900 mm; 500 kg (300 kg lighter than SED-50RG-B)

Water-cooled seal jaws give more uniform seal quality vs air-cooled designs

Lighter (500 kg) and smaller footprint than the SED-50RG-B (700 kg)

Low-cost domestic component stack (Xinjie PLC, CHINT, Yicheng pneumatics) reduces spares cost

Three fill ranges as factory options — one machine covers 5 mL to 300 mL

Universal tube-material support (full-plastic to aluminum-plastic) on one machine

Applications

Cosmetic creams, gels, lotions in tubes

Pharmaceutical / OTC topical creams and ointments

Adhesive, sealant, paint and pigment tube filling

Food paste tube filling (where applicable)

Secteurs

Daily-use chemical / cosmetic

Pharmaceutical (non-GMP scope)

Food / paint / adhesive / industrial chemical

Marques des composants

Main motor (0.4 kW)

Taili

PLC + HMI (touchscreen)

Xinjie

Mark-seek motor

Times Chaoqun

Color-mark sensor

Panasonic

Proximity switch

Maoda

Intermediate relay / temperature controller

OMRON

Switching power supply

Mean Well

Breakers / buttons

CHINT

Solenoid valves / pneumatic cylinders

Yicheng

Bearings

Harbin

VFD

Taili

Heater (3.3 kW)

Domestic OEM

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →