Accueil / Équipements / Remplisseuse de briques à toit pignon / Manual Gable-Top (Roof-Pack) Carton Filling Machine, 500 boxes/h

SED-500WDG-J

Sur devis

SED-500WDG-J

SED · SED-500WDG-J · En vedette

SED-500WDG-J — Manual Gable-Top Carton Filling Machine, 500 boxes/h

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-500WDG-J is a manual gable-top carton (roof-pack) filling machine for liquid products. The cycle has two stations performed by 4–5 operators across six steps: bottom-forming/sealing converts purchased flat carton bla

MC certification (China State Administration for Standardization)

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Operators load flat gable-top carton blanks at the bottom-forming station, where pneumatic actions form and seal the carton bottom into an open-top box. Filled boxes are transferred to the top-forming station where heated jaws and ultrasonic sealing fold the gable top to produce the finished roof-pack carton. Product is cold-filled at 2–4°C between the two stations.

Processus de fonctionnement

1Operators load flat gable-top carton blanks at the bottom-forming station, where pneumatic actions form and seal the carton bottom into an open-top box.

2Filled boxes are transferred to the top-forming station where heated jaws and ultrasonic sealing fold the gable top to produce the finished roof-pack carton.

3Product is cold-filled at 2–4°C between the two stations.

Caractéristiques techniques

Caractéristiques de la variante : SED-500WDG-J

Caractéristiques

Modèle

SED-500WDG-J

Tension

triphasé

Fluides et énergie

3-phase power supply, 15 kW total. Compressed air: flow ≥0.8 m³/min, pressure 0.8–1.0 MPa, oil-free and dust-free. Cooling water: flow ≥20 L/min, ambient temperature.

Détails de conformité

Cold-fill at 2–4°C; food-grade stainless construction with specially processed surface finish. No floor anchors required — installs on concrete, tile or plastic floors. Carton blanks loaded directly without washing.

Puissance

15 kW

Pression d’air

0.8-1.0 MPa, ≥0.8 m³/min, oil-free and dust-free

Dimensions

Longueur

1220 mm

Largeur

900 mm

Hauteur

1800 mm

Poids

500 kg

Matériaux

Matériaux en contact

Food-grade stainless steel (all liquid- and carton-contact surfaces); specially processed surface finish

Matériaux du bâti

Food-grade stainless steel throughout except the high-rigidity chassis frame

Caractéristiques principales

Capacity 500 cartons/h (at 500 ml fill)

Fill range 500–1000 ml

Cold-fill at 2–4°C

Two stations: bottom-forming and top-forming

6-step cycle, 4–5 operators

Total installed power 15 kW (3-phase)

Compact 1220×900×1800 mm footprint, 500 kg

Compressed air ≥0.8 m³/min at 0.8–1.0 MPa (oil-free, dust-free)

Cooling water ≥20 L/min at ambient temperature

Floor mount: no anchor bolts needed (concrete, tile or plastic floors)

Food-grade stainless steel construction (entire machine except chassis frame)

KINCO PLC and HMI text display

Taiwan AIRTAC pneumatics (solenoid valves, cylinders, magnetic switches)

G-TEK sensors

German IGUS linear bearings

CHINT low-voltage electrics

Ultrasonic sealing

Same design principle and mechanism as the Elopak (Aeropack) gable-top international benchmark; key components match imported equipment

Approximately half the price of imported equivalents; lower after-sales and spare-parts costs

Domestic installations running 10+ years

MC certification by China State Administration for Standardization

Gable-top packs offer higher product tier and margin in the liquid packaging market

Low logistics cost: ~1,000 carton blanks per transport box

Low water/electric/labor cost — cartons go directly to machine without washing

Small workshop footprint and low plant investment

Applications

Cold-fill liquid dairy (milk, yogurt drinks)

Beverages (juices, plant-based drinks)

Cold-chain liquid food packaging in gable-top cartons

Secteurs

Dairy

Beverage

Liquid food

Marques des composants

PLC: KINCO (China)

HMI text display: KINCO (China)

Pipeline solenoid valves: AIRTAC (Taiwan)

Pneumatic components: AIRTAC (Taiwan)

Cylinders: AIRTAC (Taiwan)

Magnetic switches: AIRTAC (Taiwan)

Sensors: G-TEK

Linear bearings: IGUS (Germany)

Low-voltage electrics: CHINT (China)

Ultrasonic sealing unit (built-in)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

MC certification (China State Administration for Standardization)