Accueil / Équipements / Sécheur à micro-ondes / Microwave Vacuum Dryer — SED-45WB-C

SED-45WB-C

Sur devis

SED · SED-45WB-C · En vedette

SED-45WB-C

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

The SED-45WB-C is a cabinet-type microwave vacuum dryer offering 45 kW of 2450 MHz microwave power with continuous infinite adjustability. The 1500×1500×1200 mm action zone holds a 10-tier rotating cart with 32 × 400×400

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Magnetrons inject 2450 MHz microwave energy from both sides of the chamber into a 10-tier rotating baking cart under vacuum. The vacuum lowers the boiling point of water (e.g., 40 °C at 7.37 kPa), allowing water in the material to evaporate without thermal damage. Microwaves penetrate the material and heat it volumetrically (no reliance on convection), drying ~4× faster than conventional vacuum drying. Optris infrared probe monitors material temperature; PLC modulates microwave power continuously to hold the user-set 50–90 °C set point.

Processus de fonctionnement

1Magnetrons inject 2450 MHz microwave energy from both sides of the chamber into a 10-tier rotating baking cart under vacuum.

2The vacuum lowers the boiling point of water (e.g., 40 °C at 7.37 kPa), allowing water in the material to evaporate without thermal damage.

3Microwaves penetrate the material and heat it volumetrically (no reliance on convection), drying ~4× faster than conventional vacuum drying.

4Optris infrared probe monitors material temperature; PLC modulates microwave power continuously to hold the user-set 50–90 °C set point.

Caractéristiques techniques

Caractéristiques de la variante : SED-45WB-C

Caractéristiques

Modèle

SED-45WB-C

Tension

Three-phase four-wire 380V ±5% 50Hz ±1% (with dedicated grounding)

Détails de conformité

Microwave leakage compliant with GB10436-89 (≤2 mW/cm² company standard, ≤5 mW/cm² national); GB 5959.6-2008 industrial microwave heating safety; GB 5226.1-2008 mechanical electrical safety (general technical requirements)

Puissance

46.5 kW

Dimensions

Longueur

2400 mm

Largeur

1800 mm

Hauteur

1980 mm

Matériaux

Matériaux en contact

304 stainless steel (POSCO Korea, mirror-polished 8 mm working-chamber panels)

Matériaux du bâti

304 stainless steel (POSCO Korea); 1.5 mm outer wall (frosted), 8 mm inner wall (polished); frame is 8# channel and ∠5×5 angle steel (Nangang)

Caractéristiques principales

Cabinet-type microwave vacuum dryer with 45 kW microwave power at 2450 MHz ±25 MHz

Microwave power continuously and infinitely adjustable (auto and manual)

Microwave leakage <2 mW/cm² (national standard <5 mW/cm²)

Microwave action zone L1500×W1500×H1200 mm, holds 32 baking pans of 400×400×10 mm

Industry-first planar rotation design for higher cabinet volume utilization; one-shot loading and unloading; 10-tier baking cart, 4 pans per tier

Industry-first dual-side microwave injection — uniform field across all tiers

Stainless 304 inner (8 mm) and outer (1.5 mm) walls — 304 2B mirror-polished interior, frosted exterior

Door interlock — won't run if door is not closed; opening door during operation cuts power instantly to prevent leakage

PLC control with touch-screen HMI (5.7" XINJE color)

German Optris remote infrared thermometer 0–300 °C for in-cavity temperature monitoring

Liquid-crystal CCTV monitoring set — directly observe arcing or material overflow

Independent magnetron groups — single failure does not stop production

Air-cooled microwave transformer (220V/60Hz overseas adaptation); air-cooled magnetrons with independent fans for long magnetron life

Drying temperature configurable 50–90 °C (set by user per product)

Industry-first planar rotation + dual-side microwave injection — uniform multi-tier drying

Independent magnetron groups for fault tolerance — production continues even with one group down

Compliant with GB10436-89, GB 5959.6-2008 (industrial microwave heating safety) and GB 5226.1-2008 (electrical safety)

4× efficiency improvement vs. conventional vacuum drying due to volumetric microwave heating

Energy-saving, no "three wastes"; microwave leakage <2 mW/cm²; extends product shelf life via low-temperature sterilisation

Applications

Vacuum drying of heat-sensitive materials such as TCM extracts, ginseng, deer antler, herbal materials

Pharmaceutical, food, biological, chemical, materials, agriculture, and high-value heat-sensitive goods

Sterilisation of TCM herbs and powders using microwave bio-effect

Low-temperature concentration, crystal-water removal, enzyme drying for chemical products

Laboratory drying for research institutions

Secteurs

Pharmaceutical (Chinese medicine extracts, herbal materials, powders)

Food (high-value, heat-sensitive)

Biological / health products

Chemical

Materials engineering

Research / academia

Marques des composants

Outer panel (δ1.5 mm 304 2B)

POSCO Korea

Working chamber panel (δ8.0 mm 304 2B)

POSCO Korea

Motor + reducer (RV130-WB150)

Tianmai

Exhaust fan (200T/220V)

—

Touch screen (5.7" color)

XINJE

Magnetron (2M244)

Panasonic

Microwave transformer (Wepex 1000B-F)

Megmeet

PLC (KLG-120S)

Far-infrared temperature probe (0–300 °C)

Optris

Frame and stiffeners (8# channel + ∠5×5 angle steel)

Nangang (NSC)

Video monitoring system

—

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →