Accueil / Équipements / Mélangeur conique vertical à ruban hélicoïdal / Vertical Conical Double-Helix Ribbon Mixer
SED-40LD-K
Sur devis
SED-40LD-K
SED · SED-40LD-K · En vedette
SED-40LD-K — Vertical Conical Double-Helix Ribbon Mixer
La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English
SED-40LD-K vertical conical double-helix ribbon mixer . A 12-24 L batch mixer ideal for mixing,drying and reaction of free-flowing powders and granules with low energy consumption and clean discharge. Conical SUS304 body
Délai de livraison
Sur devis
Cadence
12–24 L/batch
Fonctionnement
Material is loaded through a DN100 quick-open feed port. An outer SUS304 double-helix ribbon stirrer rotating at 0-96 rpm lifts material along the conical wall axially upward; simultaneously an inner counter-rotating screw stirrer pushes material back down through the centre. The convective 'axial up + centre down' flow gives high uniformity in short cycle times. An optional spray-bar can mist liquid onto the cascading material, and the 4 mm SUS304 heating jacket can warm the cone for drying or reaction. A pneumatic ball valve at the conical bottom (DN100) discharges with near-zero residue. Process variables are controlled by a PLC + touch screen with Schneider electrical components.
Processus de fonctionnement
1Material is loaded through a DN100 quick-open feed port.
2An outer SUS304 double-helix ribbon stirrer rotating at 0-96 rpm lifts material along the conical wall axially upward; simultaneously an inner counter-rotating screw stirrer pushes material back down through the centre.
3The convective 'axial up + centre down' flow gives high uniformity in short cycle times.
4An optional spray-bar can mist liquid onto the cascading material, and the 4 mm SUS304 heating jacket can warm the cone for drying or reaction.
5A pneumatic ball valve at the conical bottom (DN100) discharges with near-zero residue.
6Process variables are controlled by a PLC + touch screen with Schneider electrical components.
Caractéristiques techniques
Caractéristiques de la variante : SED-40LD-K
Caractéristiques
Modèle
SED-40LD-K
Cadence
12–24 L/batch
Tension
380V triphasé, 50Hz
Puissance
1.1 kW
Matériaux
Matériaux en contact
SUS304 stainless steel (mirror polished)
Matériaux du bâti
SUS304 stainless steel, 5mm wall + 4mm SS heating jacket; mirror polished inside and outside
Caractéristiques principales
Vertical conical double-helix ribbon mixer — high uniformity, low energy, near-zero residue discharge
Mixing volume 12-24 L per batch
Outer SUS304 ribbon stirrer 0-96 rpm + inner counter-rotating screw
Conical SUS304 body, 5 mm wall, with 4 mm SUS304 heating jacket
Mirror-polished interior and exterior
Vacuum feeding and butterfly-valve discharge for dust-free operation (optional)
Optional liquid mist spray-bar for granulation / wetting
Optional electric lift mechanism (600 mm stroke)
Built-in dust collector: 0.28 m² PTFE-coated Nomex filter, ≤2 μm filtration, 180 °C rating, pulse-jet self-clean, SUS304 cage
DN100 quick-open feed port; DN80 lighted sight glass; DN80 standard sight glass; Ø140 dust port; DN100 pneumatic ball valve discharge
PT100 temperature sensor with PLC + Schneider HMI control
Casters on base for mobility
Mixing + spray granulating + drying / reaction in one vessel — saves material transfer steps
Industry-standard component brands: Siemens/ABB motor, Schneider/Danfoss VFD, NSK/SKF bearings, NOK seals
Conical bottom discharges cleanly without manual scraping
Mirror-polished SUS304 surfaces meet hygienic / pharmaceutical standards
12-month free warranty; lifetime maintenance at cost
13% VAT included; 90-day delivery after deposit and drawing approval
Applications
Mixing of free-flowing powders and granules (bulk density <3 g/cm³, liquid content <20%)
Spray granulation / wetting of powders
Combined mixing and drying (with heating jacket option)
Combined mixing and reaction
Pharmaceutical pre-formulation and small-batch blending
Food, chemical and ceramic powder blending
Secteurs
Fabrication pharmaceutique
Food
Fine chemical / chemical
Daily chemical / household products
Cosmétiques
Ceramic / pigment / advanced materials
Marques des composants
Motor (1.1 kW, IP55, F-class insulation): Siemens / ABB (Germany)
Gear reducer: Zhejiang Tongli / Foster / Dongli (China)
Bearings: NSK / SKF (Japan / Sweden)
Frequency converter: Schneider / Danfoss (France / Denmark)
Hydraulic valves and pump: Yushun (China)
Temperature sensor (PT100): Kunlun Coast (China)
Skeleton seal: NOK (Japan)
Electrical components (breaker, contactor, etc.): Schneider (France)
Filter material (dust collector): PTFE-coated Nomex (DuPont USA / China)
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe
Documentation
Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial