Accueil / Équipements / Remplisseuse automatique d’aérosols / Aerosol Equipment - Fully Automatic

SED-40EYQW-A

Sur devis

SED-40EYQW-A

SED · SED-40EYQW-A · En vedette

SED-40EYQW-A — Aerosol Equipment - Fully Automatic

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-40EYQW-A fully automatic aerosol filling line. The complete line consists of: (1) aerosol can turntable driven by explosion-proof motor; (2) 2-head gas filling and sealing + 4-head (or 6-head) liquid filling machine,

Choisir une variante (4)

Délai de livraison

Sur devis

Cadence

45–50 cans/min

Fonctionnement

Aerosol cans are organised on a turntable driven by an explosion-proof motor and conveyed via star-wheel intermittent indexing into the filling station. A 4-head (or 6-head) guided liquid filler dispenses product, then 2 sealing/gas-filling heads inject compressed air or nitrogen at 0.4–0.6 MPa and crimp the 1″ BOV valve. Cans then travel through automatic weighing (out-of-tolerance cans are rejected with an alarm), nozzle/actuator placement via vibratory bowl and 105 L hopper, and cap pressing via air-driven orienter. The SED-610PMJ-G inkjet printer codes the can bottom. Star-wheel indexing, photoelectric sensors and PLC interlocks auto-stop the line when feed runs out or downstream is blocked, and resume automatically after the fault is cleared.

Processus de fonctionnement

1Aerosol cans are organised on a turntable driven by an explosion-proof motor and conveyed via star-wheel intermittent indexing into the filling station.

2A 4-head (or 6-head) guided liquid filler dispenses product, then 2 sealing/gas-filling heads inject compressed air or nitrogen at 0.4–0.6 MPa and crimp the 1″ BOV valve.

3Cans then travel through automatic weighing (out-of-tolerance cans are rejected with an alarm), nozzle/actuator placement via vibratory bowl and 105 L hopper, and cap pressing via air-driven orienter.

4The SED-610PMJ-G inkjet printer codes the can bottom.

5Star-wheel indexing, photoelectric sensors and PLC interlocks auto-stop the line when feed runs out or downstream is blocked, and resume automatically after the fault is cleared.

Caractéristiques techniques

Caractéristiques de la variante : 4-head liquid filler configuration (English spec

Caractéristiques

Modèle

SED-40EYQW-A

Cadence

45–50 cans/min

Tension

AC 380V

Puissance

0.75 kW

Pression d’air

0.4-0.6 MPa (filling); 0.5 MPa (nozzle pump); 0.55 MPa (capping)

Matériaux

Matériaux en contact

304 acier inoxydable

Matériaux du bâti

acier inoxydable; 304 stainless steel (key components, 1.2 mm plate)

Caractéristiques principales

PLC + touch screen control with servo and precision planetary reducer drive

Star-wheel intermittent indexing — high positioning accuracy and smooth motion

Independent initial-pressure and in-can-pressure detection gauges

Sealing claws made of imported German material — super wear-resistant, high sealing precision, long service life

4-head (or 6-head) guided filling heads — fast and stable filling

Auto-stop when insufficient cans at inlet or outlet blocked; auto-resume after fault clears

Fault source displayed on touch screen

Imported solenoid valves (SMC, ARTAC) — reliable even at low temperatures

Stainless steel construction; key components in 304 stainless steel, 1.2 mm plate

Explosion-proof motor on can-organising turntable

Automatic weight check with reject and alarm; daily production total and reject count

105 L hopper holds up to 15,000 actuators/nozzles to reduce refill frequency

Vibratory bowl with level switch auto-replenishes nozzles

Stepless speed regulation reducer; height adjustment by hand crank

Auto cap-feeding via air-driven cap orienter

SED-610PMJ-G inkjet printer: ARM926 CPU, 8-inch full-colour touch screen, 32×32 dot matrix

Applicable valve: 1″ BOV (25.4 mm); working pressure 0.4–0.6 MPa; filling accuracy ±1%

Capping machine: air supply 0.55 MPa, production rate 60–70 cans/min, suitable range φ35–φ70 mm

Actuator placement machine: air supply 0.5 MPa, mid-speed ≤80 bottles/min, high-speed ≤140 bottles/min

Complete turn-key aerosol filling line — $59,500 FOB Shanghai/Ningbo (40-day lead time)

Two-component (BOV) aerosol packaging integrated with compressed air or nitrogen filling

Filling accuracy ±1% at 45–50 cans/min throughput

Key components from Germany, Japan and Taiwan for long service life

12-month warranty after installation; lifetime maintenance support; free on-site installation and operator training

Applications

Two-component (BOV) aerosol filling

Cosmetic aerosol products

Pharmaceutical and personal-care aerosols

Compressed-air or nitrogen propellant aerosol packaging

Secteurs

Pharmaceutique

Cosmétiques et soins personnels

Daily chemical / household chemical

Aerosol packaging

Marques des composants

Solenoid valves

SMC

Solenoid valves

ARTAC

Sealing claw material

Imported German material

Control/electrical components (weight checker)

Siemens

Pneumatic/electrical components (weight checker)

Festo

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →