Accueil / Équipements / Trieuse pondérale de gélules / Capsule Checkweigher (Economic In-Line Capsule Checkweigher, with Weighing Channel)
SED-400JNC-A
Sur devis
SED-400JNC-A
SED · SED-400JNC-A · En vedette
SED-400JNC-A — Trieuse pondérale de gélules
La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English
SED-400JNC-A (with Weighing Channel) Economic In-Line Capsule Checkweigher. Five-channel checkweigher for hard capsules, with a capsule weight detection range of 30–2000 mg, dynamic accuracy ±2 mg (20-cycle repeatability
Délai de livraison
Sur devis
Cadence
400 pièces/min
Fonctionnement
Capsules drop from a 29 L hopper into a two-stage corrugated feed plate driven by twin linear vibrators. A material-organizer lines them up. Capsules enter a 9 mm feed channel,then 5 parallel 9 mm weighing channels each fitted with a strain-gauge load cell; a 9 mm delay channel follows. Each capsule is weighed individually; out-of-spec capsules are rejected by 5 individual solenoid-valve-driven air-nozzle ejectors into a separate reject bin. The touch-screen displays all channel readings simultaneously (or any single channel in large digit view); real-time SPC and data logging to USB/Ethernet.
Processus de fonctionnement
1Capsules drop from a 29 L hopper into a two-stage corrugated feed plate driven by twin linear vibrators.
2A material-organizer lines them up.
3Capsules enter a 9 mm feed channel,then 5 parallel 9 mm weighing channels each fitted with a strain-gauge load cell; a 9 mm delay channel follows.
4Each capsule is weighed individually; out-of-spec capsules are rejected by 5 individual solenoid-valve-driven air-nozzle ejectors into a separate reject bin.
5The touch-screen displays all channel readings simultaneously (or any single channel in large digit view); real-time SPC and data logging to USB/Ethernet.
Caractéristiques techniques
Caractéristiques de la variante : SED-400JNC-A
Caractéristiques
Modèle
SED-400JNC-A
Cadence
400 pièces/min
Tension
220V, 50Hz
Fluides et énergie
Main power 220 V, 50 Hz; compressed air 0.4–0.6 MPa (low-pressure alarm and stop).
Détails de conformité
All capsule-contact surfaces 316 stainless steel or pharma-grade PTFE; outer shell stainless steel; drug-contact inner surfaces polished. 24-hour continuous reliability; alarm and shutdown on compressed-air pressure drop; data + configuration parameters retained on power loss; no undetected, in-process, or rejected capsules can mix into accepted product on power failure.
Pression d’air
Compressed air 0.4-0.6 MPa (alarm and stop on low pressure)
Matériaux
Matériaux en contact
316 stainless steel or pharmaceutical-grade PTFE for all capsule-contact surfaces.
Matériaux du bâti
Stainless steel frame and outer shell; all drug-contact inner surfaces polished.
Caractéristiques principales
5 parallel weighing channels
Throughput: 80 capsules/min per channel = 24,000 capsules/hour total
Capsule weight detection range: 30–2000 mg
Dynamic accuracy: ±2 mg (20-cycle repeatability)
Display precision: 0.1 mg
10-inch industrial touch-screen HMI
Strain-gauge load cells with auto zero-point tracking
Open-channel design: full machine cleaned in <30 min; single channel replaced in <1 h
Single-channel calibration completed in <1 min
USB and Ethernet (Modbus-TCP) connectivity
Acoustic and visual alarms
Data stored for up to 1 year of continuous production
3-level password access control
24-hour continuous reliable operation
100% out-of-spec rejection guarantee — no mixed product
Universal mold set — fits all hard-capsule sizes (00#–5# and extended) without tooling change
Open-channel design = fast clean (<30 min) and fast service (<1 h)
Power-loss protection: no data loss, no mixed product on power failure
Remote monitoring + free software upgrades
Tablet check-weighing available with optional tablet mold
Printer option for detailed inspection reports
Applications
In-line capsule checkweighing
Rejection of underfilled/overfilled hard capsules
Tablet checkweighing (with optional tablet mold)
Secteurs
Pharmaceutical capsule manufacturing
Health/nutraceutical capsule manufacturing
Tablet manufacturing (with separate mold)
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe
Documentation
Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial