Accueil / Équipements / Conditionneuses sous vide à chambre / film étirable de format moyen (300–549mm) / Automatic Thermoforming Vacuum Packaging Machine
SED-351ZK-Y
Sur devis
SED-351ZK-Y
SED · SED-351ZK-Y · En vedette
SED-351ZK-Y — Automatic Thermoforming Vacuum Packaging Machine
La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English
SED-351ZK-Y fully-automatic stretch-film (thermoforming) vacuum packaging machine. 3-phase 5-wire 380 V/50 Hz,~4.5 kW total,vacuum ≤200 Pa. Top film 310 mm wide,bottom film 351 mm wide,work chamber 301 × 190 mm,mold dept
Délai de livraison
Sur devis
Cadence
3–5 cycles/min
Fonctionnement
Thermoforming vacuum packaging process: The bottom film is servo-driven via 304 SS HH-type chain grips to the forming station. Cast aluminum integral heating plates heat the bottom film; pneumatic lever molds then deep-draw the heated film to form cavities (up to 50 mm depth). Product is loaded; the top film (310 mm) is fed from above and aligned with the bottom film (351 mm). The pneumatic lever mold rises to the sealing station; vacuum pump evacuates to ≤200 Pa, optional gas flush (inert gas), then heat-seal. Servo cutter simultaneously trims and cross-cuts. Scrap film edges are wound onto a recovery spool. Entire machine has phase-loss / phase-reversal / over-/under-voltage / earth-leakage protection and mechanical safety guards.
Processus de fonctionnement
1Thermoforming vacuum packaging process: The bottom film is servo-driven via 304 SS HH-type chain grips to the forming station.
2Cast aluminum integral heating plates heat the bottom film; pneumatic lever molds then deep-draw the heated film to form cavities (up to 50 mm depth).
3Product is loaded; the top film (310 mm) is fed from above and aligned with the bottom film (351 mm).
4The pneumatic lever mold rises to the sealing station; vacuum pump evacuates to ≤200 Pa, optional gas flush (inert gas), then heat-seal.
5Servo cutter simultaneously trims and cross-cuts.
6Scrap film edges are wound onto a recovery spool.
7Entire machine has phase-loss / phase-reversal / over-/under-voltage / earth-leakage protection and mechanical safety guards.
Caractéristiques techniques
Caractéristiques de la variante : SED-351ZK-Y
Caractéristiques
Modèle
SED-351ZK-Y
Cadence
3–5 cycles/min
Tension
380V/50Hz
Fluides et énergie
Power: 380 V / 50 Hz 3-phase 5-wire (~4.5 kW); Compressed air: 0.6–0.8 MPa (≥0.8–1.0 m³/min nominal flow); Cooling water: ≥0.1 MPa; Consumables: silicone gasket / sealing strip / vacuum pump oil
Puissance
4.5 kW
Pression d’air
0.6-0.8 MPa (compressed air); ≤200 Pa
Dimensions
Poids
500 kg
Emprise au sol
See drawing (dimensions not specified in source)
Matériaux
Matériaux en contact
Aluminum alloy molds (food-hygienic grade); SUS304L SS guard and cabinet; integrated imported silicone gasket; 304 SS HH wide-open film-grip chain
Matériaux du bâti
Square-tube integral welded frame; SUS304L SS guard panels and cabinet; aluminum alloy molds and cast heating plates
Caractéristiques principales
Total power only 4.5 kW — energy-efficient
Inovance PLC + HMI + servo + servo driver — full Inovance suite
Servo film-draw system — high-speed, high-accuracy positioning
HH wide-open 304 SS film-grip chain
Pneumatic lever-type independent self-locking lift (forming/sealing molds)
Cast aluminum integral heating plates — uniform temperature, long life
Aluminum alloy molds — high strength, corrosion-resistant, food-safe
Integrated imported silicone sealing gasket — excellent sealing performance
Scrap-film winding recovery — quiet and convenient
Zoned food-grade vacuum pump,vacuum ≤200 Pa
AirTac 4V310-08 solenoid valve + GFR300-10 FRL unit
AirTac SDA magnetic cylinders
OMRON E2B proximity switch + E52L-CA1D thermocouple
CHINT NB1 / NC1 / JRS1 circuit breaker / contactor / thermal overload
Dongqi RMA-25A400 SSR + AI108 temperature controller
SUS304L SS cabinet and full machine guard
Square-tube integral welded frame — rigid, non-deforming
Phase-loss / phase-reversal / voltage / earth-leakage protection system
Forming chamber / vacuum chamber / cutter all fitted with safety guards — auto-stop on fault
Export price ~USD 26,900 (Aug 2022) for a full thermoforming vacuum line
Inovance + AirTac + OMRON + Zoned — premium key components
Only 4.5 kW total — energy-saving, suitable for small-medium food factories
Mold depth up to 50 mm — accommodates thicker products
Integrated imported silicone gasket — superior sealing
Applications
Snack food vacuum soft packaging
Meat products (ham / bacon / cured meat) thermoforming vacuum
Seafood / aquatic product vacuum packaging
Tofu / soy products / fermented dairy vacuum packaging
Cheese / dairy vacuum packaging
Pharmaceuticals / medical devices thermoforming packaging
Secteurs
Food
Meat products
Aquatic / seafood
Dairy
Pharmaceuticals / medical devices
Marques des composants
PLC
Inovance H3S-3232MT
HMI
Inovance IT7070S
Servo motor
Inovance MS1H4-40B30CB-T331Z
Servo driver
Inovance SV630PS2R8I
SSR
Dongqi RMA-25A400
Temperature controller
Dongqi AI108-4-SB10-T
Circuit breaker
CHINT NB1-63
Contactor
CHINT NC1-1210 AC220V
Thermal overload
CHINT JRS1-09-25/Z
Intermediate relay
CHINT NXJ-AC220V-4Z1
Solenoid valve
AirTac 4V310-08
Cylinder
AirTac SDA magnetic
FRL unit
AirTac GFR300-10
Vacuum pump
Zoned 100 food-grade
Film-grip chain
Honghai (Honghai Precision) 304SS HH wide-open
Proximity switch
OMRON E2B-M12KS04-WP-C1
Thermocouple
OMRON E52L-CA1D
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe
Documentation
Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial