Accueil / Équipements / Four/tunnel thermorétractable autonome (moyen, RS 25–50 et sur mesure/sans code) / Heat Shrinkage Packing Machine

SED-30RS-C

Sur devis

SED · SED-30RS-C · 2 unités vendues

SED-30RS-C — Heat Shrinkage Packing Machine

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-30RS-C heat shrinkage packing machine. Shrink film is wrapped around the product, then conveyed through a heated tunnel where the film tightly shrinks onto the goods. This fully displays the product's appearance, imp

Délai de livraison

Sur devis

Cadence

12 m/min

Fonctionnement

Shrink film is wrapped around the product and the conveyor carries it through a heated shrink tunnel (1500×450×250 mm). Circular metal heaters and circulating fans (2×750 W) heat the tunnel to the set temperature (110–180°C depending on film type). A solid-state voltage regulator and intelligent temperature controller maintain stable tunnel temperature. The film tightly shrinks around the product contour. Conveyor speed (0–12 m/min) is adjusted to balance dwell time against film grade and product requirements.

Processus de fonctionnement

1Shrink film is wrapped around the product and the conveyor carries it through a heated shrink tunnel (1500×450×250 mm).

2Circular metal heaters and circulating fans (2×750 W) heat the tunnel to the set temperature (110–180°C depending on film type).

3A solid-state voltage regulator and intelligent temperature controller maintain stable tunnel temperature.

4The film tightly shrinks around the product contour.

5Conveyor speed (0–12 m/min) is adjusted to balance dwell time against film grade and product requirements.

Caractéristiques techniques

Caractéristiques de la variante : SED-30RS-C

Caractéristiques

Modèle

SED-30RS-C

Cadence

12 m/min

Tension

220V/380V, 50/60Hz

Fluides et énergie

220V/380V 50–60 Hz electrical supply; total rated power 13.2 kW; proper protective earthing required.

Détails de conformité

Warranty: 12 months from installation; parts damaged due to quality defects replaced free of charge within the warranty period. Beyond warranty period, technical support and spare parts are available at cost.

Puissance

13.2 kW

Dimensions

Longueur

1800 mm

Largeur

703 mm

Hauteur

1310 mm

Emprise au sol

Machine dimensions: 1800×703×1310 mm (L×W×H). Place on a flat, level surface. Must be properly earthed (grounding resistance ≤4 Ω) before operation.

Compatibilité

PE Film Temperature

150-180 °C

POF Film Temperature

130-170 °C

PP Film Temperature

130-170 °C

PVC Film Temperature

110-130 °C

Composants

Conveyor Motor

120W, reduction ratio 15:1

Fan Motor

2 x 750W

Heating Tubes

6 x 1800W circular

Fonctionnement

Conveyor Load Capacity

10 kg

Conveyor Speed

0-10 m/min

Caractéristiques physiques

Shrink Chamber Size

1500x450x250 mm

Sécurité

Grounding Resistance

≤4 Ω

warranty

Warranty Period

1 year

Caractéristiques principales

Circular metal tube heaters for even tunnel temperature (6 heaters: 3×1500W + 3×1800W)

Two circulation fan motors (2×750W)

Electronic stepless conveyor speed control: 0–12 m/min

Intelligent temperature controller

Solid-state voltage regulator for power/temperature control

Shrink tunnel size: 1500×450×250 mm

Conveyor load capacity: 10 kg

Compatible with PVC (110–130°C), PP (130–170°C), PE (150–180°C), and POF (130–170°C) shrink films

Observation windows (high-temperature glass + acrylic)

Low noise, simple control panel

Grounding resistance: ≤4 Ω

1-year warranty

High heating efficiency and stable, reliable performance

Simple panel with stepless speed and temperature adjustments — easy to operate

One-year warranty with ongoing technical support and parts supply

Improves product presentation and protects from shocks and tampering

Compatible with multiple shrink film types (PVC/PP/PE/POF)

Applications

Heat-shrink packaging of finished goods

Multi-pack / bundle shrink wrapping

Tamper-evident sealing

Moisture and dust protection of packaged items

Secteurs

Food

Beverage

Candy / Confectionery

Stationery

Hardware tools

Daily provisions

Chemical products

Pharmaceutical packaging

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Keep machine body clean; keep electrical compartment dry and well-ventilated. Switch off and disconnect power before any servicing. Check that fasteners on all moving parts are tight every day before starting. Switch off the power if the machine will be idle for an extended period. After packaging is finished, turn off the heating switch first and allow conveyor and fan motors to run for about 10 minutes before switching off the power completely — this extends machine service life.