Accueil / Équipements / Sécheur centrifuge à grande vitesse pilote/petite production (5–50 kg/h) / SED-PG High-Speed Centrifugal Spray Dryer
SED-30PG-T
Sur devis
SED-30PG-T
SED · SED-30PG-T · En vedette
SED-30PG-T — SED-PG High-Speed Centrifugal Spray Dryer
La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English
SED-30PG-T high-speed centrifugal spray dryer with 30 kg/h water-evaporation capacity. Co-current spray drying tower (Phi 2.2 m, straight section 2.44 m, total height 6.3 m) with 304 stainless steel inner shell (mirror f
Délai de livraison
Sur devis
Cadence
25.5–31.5 kg/h water evaporation
Fonctionnement
Filtered ambient air is heated by a 63 kW electric heater to 60–240 °C and enters the heat-air distributor at the tower top, swirling uniformly into the drying chamber. Feed liquid is metered by a stainless Mohno screw pump (LGB15-1.5, 0.75 kW VFD) to the high-speed centrifugal atomiser (XH-30-0.55, 18,000–24,000 rpm), which atomises it into fine droplets that contact the hot air co-currently and dry to powder/granule in seconds. Product is continuously discharged from the chamber bottom and from two CZT-5.0 long-cone cyclones (primary and secondary) into 20 L SS304 collection drums via quick-coupling valves; three pneumatic vibrators prevent buildup. Exhaust air is induced out by a 5.5 kW fan.
Processus de fonctionnement
1Filtered ambient air is heated by a 63 kW electric heater to 60–240 °C and enters the heat-air distributor at the tower top, swirling uniformly into the drying chamber.
2Feed liquid is metered by a stainless Mohno screw pump (LGB15-1.5, 0.75 kW VFD) to the high-speed centrifugal atomiser (XH-30-0.55, 18,000–24,000 rpm), which atomises it into fine droplets that contact the hot air co-currently and dry to powder/granule in seconds.
3Product is continuously discharged from the chamber bottom and from two CZT-5.0 long-cone cyclones (primary and secondary) into 20 L SS304 collection drums via quick-coupling valves; three pneumatic vibrators prevent buildup.
4Exhaust air is induced out by a 5.5 kW fan.
Caractéristiques techniques
Caractéristiques de la variante : SED-30PG-T
Caractéristiques
Modèle
SED-30PG-T
Cadence
25.5–31.5 kg/h water evaporation
Tension
3-phase 380V
Puissance
70 kW
Dimensions
Longueur
9000 mm
Largeur
4000 mm
Hauteur
6300 mm
Emprise au sol
Overall footprint 9,000 mm (L) × 4,000 mm (W); total height 6,300 mm
Matériaux
Matériaux en contact
304 stainless steel: chamber inner shell (mirror polished), atomiser flange, heat-air distributor, ducts, cyclones, hoppers, collection drums, valves
Matériaux du bâti
304 stainless steel inner; Q235 frame and support legs; checkered-plate operating platform
Caractéristiques principales
Drying chamber Phi 2.2 m, total height 6.3 m, 304 SS mirror-finish inner (2 mm)
Centrifugal atomiser XH-30-0.55, driven by 0.75 kW VFD (0–300 Hz, 18,000–24,000 rpm)
63 kW all-electric heater (3-phase 380 V); inlet temperature 60–240 °C adjustable
Outlet temperature 70–95 °C; product discharge 40–60 °C
Two-stage CZT-5.0 long-cone cyclones with 20 L SS304 collection drums and quick-coupling valves
5.5 kW induced-draft fan (9-19-4.5A) with VFD
Three pneumatic vibrators on cyclones (compressor user-supplied)
Stainless Mohno feed pump LGB15-1.5, 0.75 kW VFD
Product recovery ≥ 99.5%
System airflow 1,024–1,552 m³/h; system air pressure 4,630–4,690 Pa
High inlet temperature (up to 280 °C) for tough drying tasks
Spray-dried product retains spherical shape with good flowability and solubility
Reduces unit operations — no post-grinding/sieving needed for feed moisture 40–60% (up to 90%)
35-day production lead time
Applications
Spray drying of solutions, emulsions, suspensions, and plastic paste
Powder, granule, or block production of heat-sensitive materials
Secteurs
Pharmaceutique
Food
Chemical
Marques des composants
Atomiser XH-30-0.55 (0.75 kW VFD)
OEM
Feed pump LGB15-1.5 (0.75 kW VFD)
OEM
Cyclones CZT-5.0 (x2)
OEM
Induced fan 9-19-4.5A (5.5 kW)
OEM
Temperature indicator XMT
Chint
Inverter 0–300 Hz, circuit breaker, contactor, overload relay
Chint
Thermocouples (x2)
Chint
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe
Documentation
Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial