Accueil / Équipements / Tamiseuse de comprimés / Tablet Deduster (Vibratory Rotary Screening Machine)

SED-300SPJ-D

Sur devis

SED · SED-300SPJ-D · 27 unités vendues

SED-300SPJ-D — Dépoussiéreur de comprimés

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-300SPJ-D is a vibratory rotary tablet deduster designed to remove powder dust attached to tablets after compression. Ideal as a supporting unit for tablet presses or as a standalone deduster for tablets and granular

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

467500–632500 pièces/h

Fonctionnement

Tablets enter the deduster from a tablet press output chute. They flow onto a vibrating-rotating sieve assembly: an upper sieve tumbles tablets in a spiral path; an outer cover and lower sieve below separate dust through fine mesh. A vacuum cleaner connected at ports 11/12 draws loose powder out through the lower sieve into the dust collection container. Tablets travel along the spiral baffle and exit clean from the upper output, while dust exits the lower port. Vibration frequency is set via a knob (variable resistor on oscillator coil) for throughput tuning.

Processus de fonctionnement

1Tablets enter the deduster from a tablet press output chute.

2They flow onto a vibrating-rotating sieve assembly: an upper sieve tumbles tablets in a spiral path; an outer cover and lower sieve below separate dust through fine mesh.

3A vacuum cleaner connected at ports 11/12 draws loose powder out through the lower sieve into the dust collection container.

4Tablets travel along the spiral baffle and exit clean from the upper output, while dust exits the lower port.

5Vibration frequency is set via a knob (variable resistor on oscillator coil) for throughput tuning.

Caractéristiques techniques

Caractéristiques de la variante : SED-300SPJ-D vibratory rotary tablet deduster

Caractéristiques

Modèle

SED-300SPJ-D

Cadence

467500–632500 pièces/h

Tension

220V 50Hz 1Φ

Tensions prises en charge

220V 50Hz 1Φ (par défaut); 110V 60Hz 1Φ

Fluides et énergie

AC 220V/50Hz (or 110V/60Hz) electric supply (~110 W, 0.5 A); compressed air at 0.05 MPa, 0.1 m3/min; user-supplied vacuum cleaner at 2.7 m3/min @ 0.01 MPa negative pressure

Détails de conformité

CE certified; designed for pharmaceutical dedusting applications under GMP requirements when paired with user-supplied vacuum cleaner

Puissance

0.11 kW

Pression d’air

Compressed air 0.05 MPa @ 0.1 m³/min; vacuum 0.01 MPa @ 2.7 m³/min (user-supplied vacuum)

Dimensions

Longueur

350 mm

Largeur

350 mm

Hauteur

950 mm

Poids

38 kg

Emprise au sol

350 mm diameter cylinder; height adjustable 770-950 mm to interface with tablet press output chute

Matériaux

Matériaux en contact

Stainless steel sieves; rubber sealing ring

Matériaux du bâti

Stainless steel cylinder housing; cast aluminum base

commercial

Aspirateur

customer-supplied (not included)

Compatibilité

Max Tablet Diameter

25 mm

Alimentation électrique

Current

0.5 A

Fonctionnement

Compressed Air

0.1 m³/min @ 0.05 MPa

Vacuum Dust Suction

2.7 m³/min @ 0.01 MPa

Caractéristiques physiques

Machine Diameter

350 mm

Machine Height

770-950 mm

Caractéristiques principales

Vibratory rotary spiral sieve -- fast tablet conveyance with effective powder separation

Tablet and dust separated into two distinct output layers

Up to 550,000 pieces/h throughput at low power (110 W, 0.5 A)

Compatible with tablets up to 25 mm diameter

Tool-free disassembly (top cover, sieves, baffle, tray) for cleaning

Compact footprint: 350 mm diameter cylinder, height 770-950 mm (adjustable)

Low noise operation

Variable-resistor speed control via knob

Compressed air port for additional cleaning (0.05 MPa, 0.1 m3/min)

Connects to user-supplied vacuum cleaner (2.7 m3/min @ 0.01 MPa) via two suction ports

CE certified

Essential between tablet press and downstream packaging -- protects bottlers/blister packers from powder contamination

Massive throughput (550,000 pcs/h) supports any tablet press output

Compact 350 mm diameter cylinder fits tight spaces beside the press

Tool-free disassembly speeds changeover between products

Two-layer output makes powder reclamation straightforward

Simple, robust mechanical design -- low maintenance

Available 110V/60Hz for export markets

Affordable entry point for tablet line dust control

Applications

Inline dust removal between tablet press and bottling/blister packing

Standalone dedusting of tablets and granular materials

Powder reclamation from tablet output

Dust removal for sugar-coated and plain tablets

Granule cleaning in pharmaceutical and confectionery production

Secteurs

Fabrication pharmaceutique

Compléments alimentaires et nutraceutiques

Confectionery (compressed candies)

Médecine vétérinaire

Marques des composants

In-house electromagnetic vibration coil (DT)

Generic rectifier diodes (D1) and variable resistor (W) for vibration control

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

Nettoyage et entretien

DO NOT wash the entire machine with water. Loosen top compression nut, remove cover (2), upper sieve (3), outer shell (4), rubber ring (5), lower sieve (6); then pull rod (7), tray (8), dustpan (9), and corrugated plate (10). Clean each part separately with brushes and dry compressed air. Reassembly: align lower sieve outlet with dustpan opening; offset upper sieve bottom outlet 10 mm counterclockwise from lower sieve baffle; leave gap between cover inlet and upper sieve top opening; tighten top compression nut to prevent excessive noise. Parts below tray should not be disassembled unless noise or throughput issues occur.