Accueil / Équipements / Remplisseuse semi-automatique / Semi-Automatic Filling Machine — Semi-Automatic Filling Machine (Vertical Ball-Valve)

SED-300BYG-H

Sur devis

SED-300BYG-H

SED · SED-300BYG-H · En vedette

SED-300BYG-H — Semi-Automatic Filling Machine

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-300BYG-H Vertical Pneumatic Semi-Automatic Ball-Valve Filler. Single-head pneumatic piston filler designed for viscous liquids, pastes, and sauces. Filling range 30–300 ml at ±1% accuracy (±1–2% practical). 10–30 bot

Choisir une variante (4)

Délai de livraison

Sur devis

Cadence

10–30 flacons/min

Fonctionnement

Pneumatic single-head piston filler: a pneumatic cylinder drives a piston that draws liquid through the rotary stainless ball valve from the hopper into the cylinder, then dispenses the metered shot through the same valve into the filling nozzle. Pneumatic control valves regulate cylinder stroke (fill volume) and speed (fill rate). A foot pedal triggers each shot (manual/foot-pedal mode) or a magnetic reed switch triggers continuous cycling (auto mode). Volume is adjusted by rotating the hand-wheel, which can be read directly. A reset button recovers from mid-stroke power loss or valve jam.

Processus de fonctionnement

1Pneumatic single-head piston filler: a pneumatic cylinder drives a piston that draws liquid through the rotary stainless ball valve from the hopper into the cylinder, then dispenses the metered shot through the same valve into the filling nozzle.

2Pneumatic control valves regulate cylinder stroke (fill volume) and speed (fill rate).

3A foot pedal triggers each shot (manual/foot-pedal mode) or a magnetic reed switch triggers continuous cycling (auto mode).

4Volume is adjusted by rotating the hand-wheel, which can be read directly.

5A reset button recovers from mid-stroke power loss or valve jam.

Caractéristiques techniques

Caractéristiques de la variante : SED-150BYG 5–150 ml range

Caractéristiques

Modèle

SED-300BYG-H

Cadence

10–30 flacons/min

Fluides et énergie

Compressed air 4–6 kg/cm² (acceptable supply range 4–8 kg/cm²); no electrical power required for the filling action itself

Détails de conformité

Suitable for food / pharma / daily-chemical / pesticide service. Replace seal rings promptly when worn. Do not strike the rotary ball valve during cleaning.

Pression d’air

4-6 kg/cm² (max 4-8 kg/cm² supply)

Dimensions

Longueur

450 mm

Largeur

450 mm

Hauteur

1450 mm

Poids

65 kg

Matériaux

Matériaux en contact

SUS304 stainless steel rotary ball valve, hopper, filling head, and piston cylinder; rubber/PTFE O-rings on piston seal

Matériaux du bâti

SUS304 stainless steel housing

Caractéristiques principales

Single filling head, vertical orientation

Filling range 30–300 ml, accuracy ±1%

Throughput 10–30 bottles/min (product/spec dependent)

Pneumatic-only operation — no electrical service required for filling

Foot-pedal and auto modes — switchable on the fly without shutting off air

Stainless-steel wear/acid/heat-resistant rotary ball valve

Independently adjustable suction speed and dispense speed

Hand-wheel volume adjustment with direct reading

Magnetic reed-switch position sensing for auto cycling

Reset button to recover stalled cylinder

Compact 450 × 450 × 1450 mm, ~65 kg

Hopper, ball valve, and filling head all easily removable for cleaning

Pneumatic-only — safe for explosion-prone or wash-down environments

Handles wide viscosity range: liquids, pastes, sauces

Low-cost entry-level filler — simple manual changeover, easy maintenance

Foot-pedal / auto switching keeps operator productivity high

Compact vertical footprint fits small production areas

Applications

Sauce / paste / honey / cosmetic cream filling

Pharmaceutical liquid / gel filling

Pesticide / agrochemical liquid filling

Food / daily-chemical / specialty filling

Secteurs

Food / condiments / sauces

Cosmetics / daily chemical

Pharmaceutical (small-batch)

Pesticide / agrochemical

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Disconnect air supply before disassembly. Do not flush the machine body directly with water — this may damage internal pneumatic control components. Use alcohol to wipe exterior surfaces. The hopper, ball valve cylinder, and stainless steel rotary valve can all be easily dismantled for cleaning. Drain the water filter regularly. Pneumatic cylinders are pre-lubricated at the factory — do not disassemble or add lubricating oil.