Accueil / Équipements / Équipements / Vibrating Fluid Bed Dryer

SED-3-4.5ZGF-H

Sur devis

SED-3-4.5ZGF-H

SED · SED-3-4.5ZGF-H · En vedette

SED-3-4.5ZGF-H — Vibrating Fluid Bed Dryer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

The Vibrating Fluid Bed Dryer (VFD) is a continuous drying, cooling, and humidifying system that uses vibration force to convey materials horizontally while hot or cold air passes through a fluidized bed for heat and mas

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Material enters the machine from the inlet and is thrown forward in a continuous motion in the horizontal direction by vibration force. Hot air passes through the fluidized bed from below, transferring heat upward to the wet material. The pre-drying section uses high-pressure low-airflow fans for complete fluidization, the drying section uses low-pressure high-efficiency fans for moisture removal, and the cooling section uses high-efficiency fans to quickly lower product temperature.

Processus de fonctionnement

1Material enters the machine from the inlet and is thrown forward in a continuous motion in the horizontal direction by vibration force.

2Hot air passes through the fluidized bed from below, transferring heat upward to the wet material.

3The pre-drying section uses high-pressure low-airflow fans for complete fluidization, the drying section uses low-pressure high-efficiency fans for moisture removal, and the cooling section uses high-efficiency fans to quickly lower product temperature.

Caractéristiques techniques

Caractéristiques de la variante : SED-3-4.5ZGF-H

Caractéristiques

Modèle

SED-3-4.5ZGF-H

Fluides et énergie

Compressed air (for pneumatic components if applicable); Steam (for steam radiator heating system); Electrical power

Matériaux

Matériaux en contact

SUS304 (s=2mm, s=3mm)

Matériaux du bâti

SUS304 stainless steel (bed body, duct, air duct, perforated plate); A3 steel (bed body sealing material, vibration motor plate, electric box); 16# steel (bed body bracket)

Caractéristiques principales

Vibration motor drive for smooth operation, easy maintenance, low noise, and long life

Flow uniformity with no dead space or blow-through phenomenon

Good adjustability with stepless regulation of material layer thickness, moving speed, and amplitude

Minimal damage to material surface — suitable for brittle materials and irregular particles

Fully sealed structure preventing cross-contamination of material and exhaust gas

High mechanical and thermal efficiency with 30%-60% energy savings compared to general dryers

Quick-open structure between upper and lower bed bodies for easy cleaning

Combined hole pattern on bed plate: tongue-shaped holes at front for unobstructed material flow, straight holes at middle/back for higher hot air penetration

Stainless steel seamless steel tube support for robust bed body structure

Stainless steel full welding inside bed body to prevent sewage entering insulation layer

Energy saving 30%-60% compared to general dryers

GMP-compliant design with stainless steel construction (SUS304)

Quick-open structure for thorough cleaning — no bolt fixing needed

Continuous production with fully sealed operation

Can perform drying, cooling, and humidifying simultaneously

Stepless adjustable material layer thickness and moving speed

Low material damage — suitable for brittle and irregular particles

Applications

Drying

Cooling

Humidifying of materials

Secteurs

Chemical

Pharmaceutique

Food

Fruit

Beverage

Seed processing

Slag processing

Marques des composants

Electric appliance

SIEMENS

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Open the air hole regularly to inspect and clean material in the air channel and air-plates hole. If using water for cleaning, ensure no water remains after cleaning to avoid affecting the next drying cycle. The quick-open structure between upper and lower bed bodies facilitates thorough cleaning. Cleaning port is provided for convenient equipment cleaning.